hottest day ever and water cooling is surprisingly doing well

hi all its a hot one today, my room is 28'c and for the uk thats a roasting temp lol... any how i have my windows closed/curtains closed and projector on "102inch baby" and ive been playing games most of the day, this is the warmest my pc has ever got sense ive had it, not to bad to say the loop should be well overloaded normally id have windows open and fan on or aircon but i wanted to see the extremes i could use pc too



here my pc setup [360rad runs a gtx580 + i7930 - all fans minimum]





here my crib

 

Yup, i'd expect it to cope, especially with the CPU at stock. What I cant understand is being indoors with closed curtains and windows spending the day playing games on the sunniest, hottest day of the year so far!!! LOL!

 

its my only day off in weeks from work and wanted to play crysis2 and nfsSU quiet bad lol..

 

I get ya, I've done it before myself in the past when there's a game I've just had to play! U did a good job with that rig btw damien!

 

thankyou mate, i like my rig its the first ive been 80% happy with, theirs alot i want to do but ran out of money, i hope to start working on it again some day now im working again. but i have other stuff i need to save/spend on firts a few things i want to do is add second rad, black compression fitting, modded side panel windows... and the list goes on lol.. ps i loved ur tj9 case i think it was setup

 

Nice bit of kit you've got there mate.
Very tidy.
700D by the looks of it.
Got a 800D

Looking at a new 360 Rad for my Tri 470's
Decided on the xspc rx360(got a rs360 at the min and its rubbish for my cards), but what are you using there?
Fans? and how many...

Thanks..

 

hi im using a 700d yes dint like the window / hdd setup is the 800D

as for the rad im using the TFC X-Changer Triple Radiator 360 and for fans this is my setup

2x Scythe Kaze Jyuni 1900RPM
intakes bottom and back - both lowest rpm very very quiet
http://www.********************/showproduct.php?prodid=FG-022-SY&groupid=701&catid=57&subcat=4

3x Xilence XPF120R Red Wing
rad fans push setup - all lowest rpm also extremely quiet
http://www.********************/showproduct.php?prodid=FG-000-XI&groupid=701&catid=57&subcat=4

then their is the ram modules fan which is at 40% and its the loudest thing in my pc yet my pc is still silent, its hard to hear it even at night



EDIT: for some reason the 0vercl0ckers links are ***** out just change the **** to correct thing

 

cheers for the reply & info

Think you can get a window for yours if you wanted.
Seems a shame not to show it off.

Got some of those Scythe Kaze Jyuni 1900RPM on my Rad - on top
Running 6 fans in total
Will give the Rad a look at.
Hitting 70+ on full load at the moment on GPU's
This is my setup on EVGA site
http://www.evga.com/ModsRigs/detail.aspx?BuildID=25111
1 GPU missing as its going back

Work in progress

Cheers again

 

What are your idle temps?

38c?

If so thats high... im on air here with idle of 26c

Not far from you and its warm here as well

 

on a avg 21'c room temp day, i avg 31'c cpu / 23'c gpu...look here for more info on temps ect
http://forums.guru3d.com/showthread.php?t=334153

today its 28'c in my room and water cant go any colder than ambient room temp so thats why my idles are higher than yours.. also i have a gpu/cpu in same loop

thankyou and wow 6fans does ur rad have a high air pressure fin layout... i used my Scythe Kaze Jyuni 1900RPM on my rad last build and lowest rpm-highest made no difference with my rad.. so i went for colored fans to match my design and stull no difference in temps lol... as for case windows i have planed it all out and just need to get the money for lazoring it

 

This my rig
Thermochill 120.3 PA at the back, Black ice gts 360 in the roof, Feser 120 Xchanger at the bottom, Heatkiller 3.0 full copper block, top gpu 470 has mcw80 bottom gpu 470 has ek supreme vga HF acetal/copper.
Best 3d mark 11 score little over 10800 points
Worlds fastest 470's in heaven xtreme according to hwbot

 

@ damien666 - what a lovely setup you have got there.......really nice eeee, keep it up )