Yo everyone there is a new firegl driver 10.32. Just dwnloading now... Gonna test.... hope it works with script.... prob not.... Ill report back in a bit -edit- Here are the changes 6.13.10.1032 ------------- PDMS, outlines not shown properly in high resolution Review Reality, dual screen corruption issue Viewperf 7.1 , subset 3dsmax02 causes application error Enovia, bad rendering in Portal ProENGINEER 2001, flickering during zoom operation VANTAGE, overlay doesn't work correctly in single and dual screen ICEM Surf, self shadows do not work correctly 3DStudio Max 4/5, hangs system in scenes with lots of textures 3D Studio Max 4/5, “edge only" display option doesn't function correctly 3D Studio Max 4/5,hidden wirefrme doesn't display correct image Softimage|3D Fatal Error in app. Softimage|XSI, application freezes when orbiting Softimage|XSI, causes blue screen in dual screen mode SoftImage|XSI, Texture missing after particular sequence SoftImage|XSI, tumble VP hangs system I-DEAS 10, model flickers in HW animation mode. Deadlock in RTCW single player mission on some systems Threadwin application error VAPI test program cause problem FSAA is enabled. Advanced settings tab is added to enable this feature. -edit2- Right just patched file and got this Browsing for file ati2mtgl.sys... selected 6.13.10.1032, 539520 bytes WARNING: Certified patch script not found, using common patch script... 0006ad8a> matched sequence has been replaced a9 00 00 00 08 74 06 a9 00 00 00 08 90 90 0006c134> matched sequence has been replaced 83 f8 40 0f 85 d8 00 00 00 66 81 bd 00 ff ff ff 02 10 0f 85 c9 00 00 00 66 81 a5 02 ff ff ff f0 f0 66 81 8d 02 ff ff ff 07 0e 90 90 90 90 90 90 0006c18e> matched sequence has been replaced 8a 9d 08 ff ff ff b3 80 90 90 90 90 File has been successfully patched and saved as ati2mtgl.sys Backup copy has been saved as ati2mtgl.old Not sure abt the warning thing but will find out RIGHT NOW, gonna install brb to report.
Ok the driver seems to have installed fine. 3dsmax works fine. All driver components have been updated to 10.32. But specviewperf 7.1 still shows the same problems. Can someone else try on theirs to c if specviewperf 7.1 works ok with these. Gonna install cnt panel now and c if AA really is enabled there. In a bit -Edit- Here are my results with specviewperf 7.0, no massive changes here. Just slight increases across the board. Run All Summary FireGl Driver 10.32/10.30 ---------- SUM_RESULTS\3DSMAX\SUMMARY.TXT 3dsmax-01 Weighted Geometric Mean = 17.29/16.69 ---------- SUM_RESULTS\DRV\SUMMARY.TXT drv-08 Weighted Geometric Mean = 90.33/89.53 ---------- SUM_RESULTS\DX\SUMMARY.TXT dx-07 Weighted Geometric Mean = 129.3/129.0 ---------- SUM_RESULTS\LIGHT\SUMMARY.TXT light-05 Weighted Geometric Mean = 26.27/25.90 ---------- SUM_RESULTS\PROE\SUMMARY.TXT proe-01 Weighted Geometric Mean = 21.69/21.67 ---------- SUM_RESULTS\UGS\SUMMARY.TXT ugs-01 Weighted Geometric Mean = 27.83/27.81
Well good it worked even though it patched with a warning message. Gonna try them myself now and hope that lightwave issues has been fixed even though they don't say anything bout it.