AMD Catalyst 10.10d Hotfix Win7 Von modded

Discussion in 'Videocards - AMD Radeon Drivers Section' started by Von Dach, Nov 2, 2010.

  1. EagleClaw

    EagleClaw Master Guru

    Messages:
    608
    Likes Received:
    0
    GPU:
    Sapphire 5870 1GB Vapor-X
    Easy until the driver install starts and then stops with an error and
    you can't get back into windows.

    Thanks for all your help



     
  2. KodY

    KodY Master Guru

    Messages:
    627
    Likes Received:
    0
    GPU:
    Sapphire 280X Vapor-X
    Is this x64 or x86 driver or both?
     
  3. marthand

    marthand Master Guru

    Messages:
    344
    Likes Received:
    0
    GPU:
    ATI 5850+Nvidia 8800GTS
    Is MLAA is officially adding for 5xxx on Next release
     
  4. NiukNiuk

    NiukNiuk Guest

    Messages:
    2,057
    Likes Received:
    0
    GPU:
    MSI R6950 twin frozr II
    Both

    Driver works fine here (win 7 x64)

    I uninstalled the old one (TwL's driver 4.23a), rebooted in safe mode, then I cleaned using driversweeper/drivercleaner, rebooted, used "ati *** cleaner" and installed this new driver.
     

  5. kilyan

    kilyan Master Guru

    Messages:
    610
    Likes Received:
    9
    GPU:
    evga 1080 sc gaming
    the **** cleaner does some mess and cleans to much in my mumble opinion.
    i was at the point that the monitor switched off on its own coz cannot find any driver.
    in ati **** cleaner, i suggest to say no, when it asks to clean the drivers of windows.
    Or i suggest to use driver sweeper instead of ati **** cleaner.
    The only solution to the problem of monitor switching off, is to install an other video card and link the monitor to it. Then,when u will install the 10.10 d drivers the problem is solved and now u can use again the videocard that was giving problems..
    I personally used embed video card to do that...
     
  6. EagleClaw

    EagleClaw Master Guru

    Messages:
    608
    Likes Received:
    0
    GPU:
    Sapphire 5870 1GB Vapor-X
    F8'ed and selected "boot to low rez 640x480" got into windows and installed the drivers.

    All is well.

    Noticed an almost 10fps increase in BFBC:2 online play 32 player full.

    Plus it looks better!!! CLAP!!!



     
  7. bl33dbe

    bl33dbe Member

    Messages:
    30
    Likes Received:
    0
    GPU:
    ENGTX 580 Asus
    is this better than 10.5A? are these drivers better in crossfire?
     
  8. Brandon_34

    Brandon_34 Master Guru

    Messages:
    319
    Likes Received:
    0
    GPU:
    EVGA 690GTX
    Working good here so far still testing. Install went smooth I didn't get any errors during the install
     
  9. kilyan

    kilyan Master Guru

    Messages:
    610
    Likes Received:
    9
    GPU:
    evga 1080 sc gaming
    sorry but for me din't work in every modes: tried from safe mod to 640 x 480 and the monitor kept switching off.
    The only solution was as i mentioned above....
     
  10. Mineria

    Mineria Ancient Guru

    Messages:
    5,540
    Likes Received:
    701
    GPU:
    Asus RTX 3080 Ti
    Do not uninstall Windows standard VGA driver!
    Even if TwL's ****cleaner got it as an option it will make a mess for most systems doing a driver install.
    If you did run it you either need to go via safe mode as described above or you can install the official catalyst.

    PS. The official will install, so there is something wrong with the modded inf that breaks detection if you flush every single Windows display driver.

    I ran the official install and added TwL's and Von Dach's tweaks afterwards instead.
    On 10.10c though, seems to run slightly better on my system compared to 10.10d.
     

  11. Von Dach

    Von Dach Master Guru

    Messages:
    625
    Likes Received:
    5
    GPU:
    NV560Ti @900/2394 ATI4890
    That's exactly what everybody should have! I'm waiting for you comparison, but don't expect more fps, in fact you should have less fps with a feeling that you have more because free of issues like jerkiness, fps drops, stuttering.

    Ok, it's true that the install routine is maybe too elite for average joe, and just clicking "setup" should install all mod just fine, I'll update first post with that. Still I recommend TwL's cleaner as "the real way".
     
  12. Mineria

    Mineria Ancient Guru

    Messages:
    5,540
    Likes Received:
    701
    GPU:
    Asus RTX 3080 Ti
    Except for the removal of the Windows Standard VGA driver, that really makes a mess when you try to reinstall.
    I ran a full ATI/Nvidia uninstall and tried TwL's cleaner trough with all removal options, usually I leave the Windows Standard VGA alone.
    Result was that the modded driver could NOT detect the card as a valid ATI card and skipped the driver installation, it installed everything else.
    So I did another full cleanup and checked with ATI's 10.10c official beta.
    This did detect the card as a valid ATI and installed the driver as well.
    So something got broken with the 10.10d mod.

    Thanks for the CAP removal tool :)
     
    Last edited: Nov 3, 2010
  13. Mufflore

    Mufflore Ancient Guru

    Messages:
    14,691
    Likes Received:
    2,672
    GPU:
    Aorus 3090 Xtreme
    I believe TwL means you need to remove all drivers until you have the standard VGA driver installed.
    I cheated, removed all drivers except the default ATI driver and then manually installed the standard VGA driver, worked well for me, I dont know if its advisable though.
     
  14. Von Dach

    Von Dach Master Guru

    Messages:
    625
    Likes Received:
    5
    GPU:
    NV560Ti @900/2394 ATI4890
    10.10d mod don't touch anything to the setup routine, I just changed some CCC default settings in the inf, but the inf in itself is the same. Something happened on your side, but it really can't be the little mod itself.
     
  15. Mineria

    Mineria Ancient Guru

    Messages:
    5,540
    Likes Received:
    701
    GPU:
    Asus RTX 3080 Ti
    Might be the missing signature, maybe ATI changed something upon that.
     

  16. sidhu88

    sidhu88 Member

    Messages:
    28
    Likes Received:
    0
    GPU:
    ATI 4570M
    Same here i tried the mobility one n it din recognize the card!
     
  17. crushilista

    crushilista Ancient Guru

    Messages:
    3,467
    Likes Received:
    0
    GPU:
    MSI GTX 670
    Works great on all ends here friend! Thanks. I get 110-120+ FPS in Resident Evil 5 instead of 80-120. It's a lot more consistent too. Good work.
     
  18. Von Dach

    Von Dach Master Guru

    Messages:
    625
    Likes Received:
    5
    GPU:
    NV560Ti @900/2394 ATI4890
    Thanks to report that, I hope other notebook users will try it to get a clear picture if it work or not, like I said, I don't have hardware to test it.
    Can you install it manually from Device Manager? You won't have the CCC but the modded driver itself should install.
     
  19. animatrix999

    animatrix999 Member

    Messages:
    18
    Likes Received:
    0
    GPU:
    HIS ATI 4870 512Mb GDDR5
    First time with a clean install i got display driver wasnt install error but when i tried it back again it worked perfectly fine with all options unlocked. Games seems to run a lil better too =)
     
  20. sidhu88

    sidhu88 Member

    Messages:
    28
    Likes Received:
    0
    GPU:
    ATI 4570M
    I'll try that soon! are the optimizations on the driver??
     

Share This Page