Here's the deal, when i put 2 ramsinks (with very low force) in those 2 components highlighted in red i hear a little snap and it became very loose (the plastic part, not the metal of the sides). Do i damage somehow the card? Need help please...
im not expert but maybe you just "broke" the protection-cover over the circuits. idk if that can become bad in a future (oxyde... etc...), but for now if it works... if it doesnt work, you prolly ****ed up some circuit :/. PD: Excuse my crappy english.
Yes, it still works apparently... In the future i don't know... :\ Yap, i think that it broke only the protection cover because the ramskinks are hot, and if it's hot, the circuit is fine?? :\
Pictures doesn't help because it's fine in the outside. Only difference is that those 2 components wobbles (not the metal in the sides).
If they are hot it could be, you broke the circuit "after the components", but not the circuit before (idk how to say this on english [before---component----after], again) so they are still receiving energy, but their information gets lost past them (idk if thats possible if the circuit its broken because theorically thats a closed circuit...). best way would be test the card, anyways dont try move or push the components testing if they are broken or not, altho better wait for another opinion xP. Off to sleep.
Whoa! Don't turn that on! If they are wobbling you have broken the solder! Umm... are you any good at soldering, keeping in mind you dont have any excess and you wont be able to use a heatshield to protect the component during the soldering process...
Im trying to wonder how you managed to break that? they are under the heatsink, not even the ramsticks can reach that place. ???
I have it watercooled with ramskinks in memory and mosfets. I put the ramsinks very gently and those two parts detached easily...
Non-cased or poorly-encased inductors would crack under unfortunately angled force. Considering the positioning on the top-side photo and a cracking sound, those two components are probably inductors for filtering the GPU power controller's output. If so, and depending on how badly they were damaged, you can expect fire, no operation, or intermittent behavior.
Well, the card is working fine (1100MHz core). The sound seemed the sound of glue breaking not solder... Maybe I break the glue of the casing??
The photo is poorly angled (not angled, not close-up), so insufficient to confirm what those components are. A cracked core (of an inductor) alters storable flux. The card may appear to work, but I don't know what effect changes in the magnetic flux would have in this application.
no to make fun or anything, but this is what i been hearing all day on notebookreview forum for the past few days. "put it in oven". lot of people fixed their fried laptop mobo and video chips by doing that.