TRI Fire 5870/eyefinity PROJECT/benches!!! post yours.

Discussion in 'Videocards - AMD Radeon' started by Bodar, Sep 29, 2009.

  1. death_samurai

    death_samurai Ancient Guru

    Messages:
    3,824
    Likes Received:
    2
    GPU:
    Palit 970 GTX jetstream
    I'm bringing up this thread for bodar.

    Hey could u get a few of those new nvidia 480s and bench them and compare them with the 5870s/5970s. :banana:
     
  2. Bodar

    Bodar Ancient Guru

    Messages:
    2,395
    Likes Received:
    0
    GPU:
    Lots of Fermi'zzzz
    Yeah man! :) Would be happy to do that.. Planning on it pretty soon here.

    gtx 480's vs radeon 5870's.. especially when it comes to the extreme benchmarks.. I'll do them all.. I really want TRI SLI Gtx 480's :)

    condensation seems to always be a problem.. I use dialectric grease and towels to keep all that away.. even during 24/7 phase cooling
     
  3. death_samurai

    death_samurai Ancient Guru

    Messages:
    3,824
    Likes Received:
    2
    GPU:
    Palit 970 GTX jetstream

    cool looks like u'll be doing phase and water cooling for those 480s cos they run pretty hot even on normal operation at stock speeds.
     
  4. csaris

    csaris Member

    Messages:
    29
    Likes Received:
    0
    GPU:
    5870 TriFire
    I don't believe the reviewed Fermis will be the actual product... These chips were cherry picked and that's the reason for such high power consumption.

    The final product will have a little cut down.
     

  5. psyside

    psyside Master Guru

    Messages:
    351
    Likes Received:
    0
    GPU:
    7950 @1150/6000

    God! glad to hear that, i hope u will test them with i7 980 @ 4.5ghz at least :)
     
  6. jimpsar

    jimpsar Guest

    Messages:
    95
    Likes Received:
    7
    GPU:
    6900xt MERC 319 XFX
    Hi guys need opinion about going decision regarding trifire or not.
    I can get a 5970 and give my 5870 with 240 euros.
    Or I can get another 5870 with 340 euros.
    Or stay as I am atm and buy another later at summer maybe when prices drop.
    Any suggestions?
     
  7. death_samurai

    death_samurai Ancient Guru

    Messages:
    3,824
    Likes Received:
    2
    GPU:
    Palit 970 GTX jetstream
    hey bodar, perhaps u could try a few new benches.

    Unigine has the new heaven 2.0 which has extreme tessellation feature and just cause 2 has 3 new bench marks in it.
     
  8. Blacklash

    Blacklash Member Guru

    Messages:
    108
    Likes Received:
    0
    GPU:
    AMD Radeon RX 470 4Gb
    I just hopped onto triple HD 5870 Crossfire myself. Only running a baby OC at this time of 900|1250. Below is my first swipe at Vantage using the Extreme preset.

    [​IMG]

    http://service.futuremark.com/compare?3dmv=2052413

    Heaven v2 on my rig looks like below.

    Normal tessellation 1920x1200 default filtering
    [​IMG]

    Normal tessellation 4xAA @ 1920x1200
    [​IMG]

    Extreme tessellation with 4xAA|16xAF @ 1920x1200
    [​IMG]

    Just Cause 2 Demo @ 1920x1200 4xAA|16xAF with all on/enabled, set to high or very high as applicable.

    http://img706.imageshack.us/img706/582/justcause2b.jpg
     
    Last edited: Apr 2, 2010
  9. mehdi

    mehdi Guest

    Messages:
    1,285
    Likes Received:
    0
    GPU:
    XFX 5970
    Hi guys im getting a 5970 next week what are the best drivers to use the 10.3b or opengl 4?
     
  10. csaris

    csaris Member

    Messages:
    29
    Likes Received:
    0
    GPU:
    5870 TriFire
    Get another 5870 arxige mou!
     

  11. jimpsar

    jimpsar Guest

    Messages:
    95
    Likes Received:
    7
    GPU:
    6900xt MERC 319 XFX
    I am going for that route arxonta!Thnx
     
  12. Bodar

    Bodar Ancient Guru

    Messages:
    2,395
    Likes Received:
    0
    GPU:
    Lots of Fermi'zzzz
    yeah, I would say another 5870 would be awesome! Thanks death
    _samurai for sending me the new heaven bench man! :) I'm ready to rock now!
    Hav'nt tried just cause 2 yet but I'll definitely check it out.. :)
     
    Last edited: Apr 5, 2010
  13. death_samurai

    death_samurai Ancient Guru

    Messages:
    3,824
    Likes Received:
    2
    GPU:
    Palit 970 GTX jetstream
    jeesus christ u already have 3 gpus in your setup. :nerd:


    isn't a 9800gt a bit of an over kill for a physx card unless it doesn't use an 8pin like a 9800gx2.
     
  14. jimpsar

    jimpsar Guest

    Messages:
    95
    Likes Received:
    7
    GPU:
    6900xt MERC 319 XFX
    I am using 2 gpus (2x 5870) plus the 9800gt for physx only.I dont believe its overkill while it is a single slot card and uses only one 6 pin.
    Bodar thanks for your suggestion , I will go for another 5870.
     
  15. csaris

    csaris Member

    Messages:
    29
    Likes Received:
    0
    GPU:
    5870 TriFire
    Well I dont think that 9800gt will fit with 3x5870s...
     

  16. Bodar

    Bodar Ancient Guru

    Messages:
    2,395
    Likes Received:
    0
    GPU:
    Lots of Fermi'zzzz
    Yo Guys! Just ordered a 2gb 5870 with 6 monitor inputs. The 5870 eyefinity 6! :) I'll post some stuff on it here once I get the card. :)
     
  17. csaris

    csaris Member

    Messages:
    29
    Likes Received:
    0
    GPU:
    5870 TriFire
    Bodar is the man!

    Bodar, When you get the 3x480s will you test them on eyefinity? I would like to know if multi-gpus run better than ATIs in eyefinity...
     
  18. death_samurai

    death_samurai Ancient Guru

    Messages:
    3,824
    Likes Received:
    2
    GPU:
    Palit 970 GTX jetstream
    is that the sapphire toxic edition?
     
  19. sdamaged99

    sdamaged99 Guest

    Messages:
    2,037
    Likes Received:
    27
    GPU:
    Asus TUF 6800XT
    Isn't Eyefinity ATI only? I don't think it will work on Nvidia cards.
     
  20. poo417

    poo417 Guest

    Messages:
    247
    Likes Received:
    0
    GPU:
    1080
    I think he means the Nvidia surround which is the same thing form nvidia but has to be sli to get 3 monitors.
     

Share This Page