ATT beta version (UNICODE support)

As the saying goes, stoopid people and their money are easily parted...
By what means did you force them to pay? I bet that would be a reeaaally boring story.
I'd be happy to make a donation for your work.
Will the Guru3D guys let you put a donations button on the ATT page?
It would then be up to you as to where the money went.
While ATI are back making great products, I don't know why they need so much bloat in CCC.
I really wish they would take you on as a contractor and make CCC LowBloat Edition :funny:
Sorry for the rant, didn't get enough :sleep: for some reason...

Anyway, back to more pressing matters.
My crazy board is now talking reasonably sensibly again.
.1412
- 'Set Default Clocks' works normally.
- Mostly the clocks are matching with CCC.
- If GPU is set to <157 (default) after 'Apply' ATT displays the requested setting x2.
GPU is actually set to correct requested value, confirmed in CCC.
e.g. Set GPU to 151, ATT GPU slider displays 302.
After this has been done, setting GPU to higher value ATT displays the requested setting /2.
As before, GPU actually is set to correct requested value, confirmed in CCC.
e.g. Set GPU to 510, ATT GPU slider displays 255.
So it would seem to get stuck in a setting that displays a x2 or /2 of the current GPU setting.
Setting back to 'Default Clocks' stops it happening so not a big problem.
Probably don't really need to set the clock less than 157 anyway, just something I noticed.

Never thought I would have so many copies of ATT on my desktop...
:nerd:

Thank you for your work Ray, you make the world a better place. :thumbup:
I would be interested to get a little background on what was required to get it working...

Time to go boot CCC off my system again :hatty:
cheers, drayzen

Update
Looks like removing CCC might have broken things a little.
The ATT GPU slider now jumps to /2 every time I try to set an increased clock.

 

Kay. New build 1425
Please check it with 5xxx
http://cid-a50350ea7a969f0c.skydrive.live.com/self.aspx/Public/attsetup.exe

 

Thank you Ray. Build 1425 works with 5870.

 

Could you please check all options and report?

 

Hello,

here works everything fine now with 5870.

P.S. what the hell is Driver_BIN64? I got shocked seeing this in my memory, thougt 2 days Win 7 and rootkit infected? ****!

 

W7/64 bit loader not work...oc not work....

 

Sapphire 5850
Still using .4121
It appears that setting opt_use_soft_clk_read=1 gets it working normally.
Same as it was for my 4870.
Just had to set Overclocking Limits to 100% to get enough range.

Does 'Kill ATI HotKey Poller' disable OverDrive?

I'll test .1425 tonight.
:cheers: drayzen

 

Hi @ all (& especially Ray Adams!),

just as a sidenote:


H/W clock readout for my good old X1950 Pro got broken somewhere in between build 1411 and the latest 1425 - see attached Pic:



I installed 1425 over 1411 and kept my settings and clock profiles (They're simply called "2D" and "3D"). The clock rates in both profiles are still correctly applied as before (Cross-checked that with Everest). It's only the "Current" displays (& of course the sliders) that are no longer correctly shown.

OS is W7 x64, and ATT is loaded on boot via Task Scheduler on user logon. <-- This is a great workaround, btw!!! :thumbup:



For me, this is just a "cosmetical" problem (as my clock profiles defined in build 1411 are still applied just fine), but I felt that I should share my experience...



Thx a lot Ray,

Regards

 

Stange situation with 1950. I did touch anything related to old boards!

 

Thank you for that quick reply, Ray!

I just found out that the previous version I ran was 1412, not 1411 as mentioned above.


I was lucky and haven't dumped the 1412 installation exe yet, so I did some back-and-forth checks between 1412 and 1425 during the last 30 minutes...

Changed back to 1412 and it looked like this - everything works fine:




Installed 1425, and had the same problem again (GPU & MEM read as 0).

Went back to 1412 a third time, everything is fine again... :bang:



Just for completeness, the System Information tab:

Code:

ATT Version                   1.6.9.1412
Display adapter               ATI Radeon Graphics Processor (0x7280)
Core Name                     RV570
SubVendor                     Sapphire (P.C. Partner) (174B)
SubDevice                     E190
BUS                           1
Device                        0
Function                      0
Base Address 0                E000000C
Base Address 1                00000000
Base Address 2                F5000004
Base Address 3                00000000
                              
Bus Type Supported            PCI Express 1.x
PCI-E Link Width              16
Max PCI-E Link Width          16
SMARTGART Installed           No
                              
Driver Version                09.3
Release Version               8.593.100.2-090721a-085694C-ATI
QuadBuffer Stereo Support     No
Catalyst Registry Path         
System\CurrentControlSet\Control\Video\{A4116E85-1735-4A7A-83DD-94A3609B2091}\0000 
                              
______________________________
Clock Information             
BIOS VPU                      581,00
Current VPU                   148,50
BIOS MEM                      702,00
Current MEM                   499,50
                              
______________________________
Overdrive                     
Supported                     No
                              
______________________________
Radeon PCI configuration space
    00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F  
00  02 10 80 72 07 04 10 00 9A 00 00 03 08 00 80 00 
10  0C 00 00 E0 00 00 00 00 04 00 00 F5 00 00 00 00 
20  01 A0 00 00 00 00 00 00 00 00 00 00 4B 17 90 E1 
30  00 00 00 00 50 00 00 00 00 00 00 00 00 01 00 00 
40  00 00 00 00 00 00 00 00 00 00 00 00 4B 17 90 E1 
50  01 58 02 06 00 00 00 00 10 80 01 00 A0 0F 2C 01 
60  10 08 00 00 01 0D 00 00 40 00 01 11 00 00 00 00 
70  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
80  05 00 81 00 0C F0 E0 FE 00 00 00 00 B0 49 00 00 
90  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
A0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
B0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
C0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
D0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
E0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
F0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
                              
Hardware Information          ASIC (Software) Method
Family                        60
Emulated Revision             42
Gfx Engine ID                 3
VRam Bit Width                256
Installed memory              512
                              
Hardware Information          Direct hardware access
Installed memory              512 Mb
Memory Type                   DDR3
Memory Width                  256 bit
Tmu                           12
                              
______________________________
Radeon Registers              
RADEON_BIOS_0_SCRATCH         00010000
RADEON_BIOS_1_SCRATCH         0100C000
GB_TILE_CONFIG                0140001D
HWDREG_00000000               2100056C
HWDREG_00000001               00000001
HWDREG_00000002               00000000
HWDREG_00000003               0000000D
HWDREG_00000004               25001264
HWDREG_00000005               00000001
HWDREG_00000006               00000000
HWDREG_00000007               0000000D
HWDREG_00000008               00000001
HWDREG_00000009               00000000
HWDREG_0000000A               00010037
HWDREG_0000000B               100FAC1F
HWDREG_0000000C               44221100
HWDREG_0000000D               00073071
HWDREG_0000000E               00000000
HWDREG_0000000F               0F3FF01F
HWDREG_00000010               0F3FF01A
HWDREG_00000011               0F3FF01A
HWDREG_00000012               0F3FF50A
HWDREG_00000013               0F3FF01A
HWDREG_00000014               0F3FF01F
HWDREG_00000015               000000CA
HWDREG_00000016               000001CA
HWDREG_00000017               0000018A
HWDREG_00000018               0000010A
HWDREG_00000019               0000014A
HWDREG_0000001A               0000060A
HWDREG_0000001B               0000040A
HWDREG_0000001C               0000001E
HWDREG_0000001D               00000012
HWDREG_0000001E               00000017
HWDREG_0000001F               00008028
HWDREG_00000020               00000000
                              
Video BIOS Information Adapter0
Version                       009.013.001.019
Part Number                   11x-2E190ASA-004
Date                          2007/03/05 22:33
Vram Type                     DDR3
______________________________
Multi VPU Caps                
______________________________
No additional information     
______________________________
Multi VPU State               
ulActiveAdapters              0
ulAvailableAdapters           0
ulCurrentAdapter              0
ulDongleCapabilities          0
ulDongleConnection            0
ulDongleDisplayIndex          0
ulPrimaryIndex                0
ulMVPUMaxFBSize               0
ulMVPUMaxPipes                0
ulMVPUMaxVisFBSize            0
ulMVPUState                   0
State Bits                     

Thank you!

 

Give me same report but from 1425 build. And check atitray.ini. It seems that I forgot to put 0 to opt_use_soft_clk_read

Oh, by the way. Here is a link all prev. builds, starting from 13xx

http://cid-a50350ea7a969f0c.skydrive.live.com/browse.aspx/ATI Tray Tools builds

 

You hit the nail!


Indeed it's set to 1 by default after setup. Changed it to 0 - now 1425 is working just as perfect as every previous build!!! :mhp:

I never took a look at the ini because I didn't expect such a flaw, and ATT just fired up without giving any warning or error.



Anyway, thank you for your efforts - and also for the underway support of the HD5k series in ATT!!!



I'd sure make a donation if I could anywhere find information about it.

EDIT: Found the information.


Cheers

 

Hi,

my Hotkeys dont work anymore! A Win 7 Problem or somthing wrong on my machine only?

 

I have no problems under W7. Where did you check hotkeys?

 

Sapphire 5850
.4127
Seems to be behaving same as .4121
Still need 'opt_use_soft_clk_read=1' to get a correct read on the GPU.

About the only thing I'd like to be able to do now is turn off ATI's automatic overclocking.
Did a driver only install (no CCC) but it still sets the clocks to 725/1000 when I start folding@home GPU.
I'd like to be able to leave them at stock speed when f@h is running and turn the speed up manually.

 

On Desktop, while gaming, CoD for example.

UAC is disabled, i run Ati Tools in adminstrator mode. overclocking, everything works as usually, except Hotkeys

edit: They work, but not as usual in Windows XP. command + - || , || . for example dont work, command + L do, strange but no Problem after all...might german keyboard layout?

But Thanks, great Job for years!

keep goin

 

Hello,

i recently got me an HD 5870 btw. an excellent piece of hardware.

Since my last ATI Card i used ATT and was very pleased with what you did Ray.
The same with .1425 iam using now(Win7 64Bit)...OC really works great on the HD5870, but i have one issue with it. Everytime it swiches for 3d to 2d clocks the VDDC is set to 1.065V not to 0.95V i choose in the 2d-profile.

Iam not a power user, so i barley need all the tweaks ATT offers but i hope this helps.

With .1427 i wasnt able to set the Coreclocks, the slider allways jumped back to a lower clockspeed.

Keep up the excellent work man!!!

 

Are you sure? I didn't change anything between 25 and 27 build for HD5xxx. Only updated .ini file.

 

I checked the VDDC with GPU-Z.

Iam gonna double check the coreclock thing on 27 later today.

 

Hello all. thank you Ray for creating and supporting such an awesome tool.

I downloaded it and it seems to run fine. the first time I installed it, it gave me an unsigned driver issue (I have windows 7 x64) but it still runs, and seems to work.

I want to use this tool with my 5870 for 2 reasons.

1.) on my Nvidia card I could run my CRT at 1600x1200 w/ 100 refresh rate. for some reason on both the 4870x2 I had and the 5870 ATI's drivers and windows limits me to 85 refresh rate.

I want to force a 100 refresh since I know it works, since it worked on my nvidia cards just fine. Right now on the 4125 version I try to force it and nothing changes. Screen doesnt even blink.

2.) pre-rendered frames. I havent had a chance to touch this yet but I played on my nvidia card on 0, and now my aim seems off probably because ATI is doing 3 ahead, which I will be using this tool to make it 0 again

so only 1 problem I have that would make my current setup perfect.

I am will to help you troubleshoot or provide any info you need if it helps fix this possible issue