Swiftech MCP655 (Laing D5) Water Pump http://www.specialtech.co.uk/spshop/customer/product.php?productid=3497&cat=1048&page=1 Radiator http://www.specialtech.co.uk/spshop/customer/product.php?productid=3799&cat=681&page=1 Tygon 3/8" (R3603) Tubing (Thin Walled) http://www.specialtech.co.uk/spshop/customer/product.php?productid=5835&cat=569&page=1 EK Multioption RES 150 Rev2 http://www.specialtech.co.uk/spshop/customer/product.php?productid=4194&cat=550&page=1 TFC 3/8" Compression Fitting http://www.aqua-pcs.co.uk/tfc-38-compression-fitting-1649-p.asp Swiftech Apogeeā¢ GTZ Universal CPU Waterblock+(AM2+ hold-down plate) could you suggest a retailer that has the apogee gtz with the optional AM2/AM2+ hold-down plate? To go on my quad build, spec's in sig. If there are any compatibility issue's please post, thank you in advance.
heres what i am looking at to water-cool a 295.. http://www.candccentral.co.uk/acatalog/XSPC_X20_Compact_750_Pump.html http://www.candccentral.co.uk/acatalog/XSPC_RS240_Black_240mm_Radiator.html i think that pump will do cpu and a gpu...i read reviews on ocuk and it seems to do a good job... u can phone the guy at this place and hes a nice bloke who will explain things to u well.. hope this helps.
Laing D5 Vario 12V Pump http://www.specialtech.co.uk/spshop/customer/product.php?productid=3497&cat=1048&page=1#tabs Radiator http://www.specialtech.co.uk/spshop/customer/product.php?productid=3798&cat=681&page=1 Tygon 3/8" (R3603) Tubing http://www.aqua-pcs.co.uk/38-id-tygon-r3603-tubing-1259-p.asp EK Multioption RES 150 Rev2 http://www.specialtech.co.uk/spshop/customer/product.php?productid=4194&cat=550&page=1 TFC 3/8" Compression Fitting aqua pcs http://www.aqua-pcs.co.uk/tfc-38-compression-fitting-1649-p.asp CPU Block OCZ Hydroflow http://www.specialtech.co.uk/spshop/customer/product.php?productid=7144&cat=0&page= Changed my build slightly, different pump/cpu block also i'm going to get an Antec 1200 case to go with this stuff.
that was recommended by seaplane and the guy at the shop.. http://www.candccentral.co.uk/acatalog/12V_Laing_D5_Vario_Water_Pump.html so think its the same as one u are looking at. this ones a bit cheaper maybe..
Not sure to be honest, it was noted as the second best in the water cooling buyer's guide post, i guess the thermochill one look's chucky, you know, compared to the slim design of the swiftech. Quick note, is Tygon tubing good in conjuction with dye coolant's, i am thinking bout going blood red, and would like to get an opinion of a good, and dye cooperative tubing.
Unless you're getting super fans stick with the Swiftech radiators. They're incredible bang for buck. Tygon tubing is the clearest of of the clear, so if you're putting gunk into your water then stick with it.
Radiator http://www.specialtech.co.uk/spshop/customer/product.php?productid=3798&cat=681&page=1 Rad Fan's http://www.aqua-pcs.co.uk/coolermaster-12cm-red-led-case-fan-1732-p.asp Radbox http://www.specialtech.co.uk/spshop/customer/product.php?productid=2838&cat=0&page=1 Tygon 1/2" http://www.aqua-pcs.co.uk/12-id-tygon-r3603-tubing-1098-p.asp Clip's http://www.aqua-pcs.co.uk/zinc-plated-jubilee-clip-12-10-pack-1172-p.asp xspc drive bay reservoir http://www.aqua-pcs.co.uk/xspc-bay-reservoir-clear-silver-411-p.asp TFC 1/2" Compression Fitting aqua pcs http://www.aqua-pcs.co.uk/tfc-12-compression-fitting-1648-p.asp CPU Block OCZ Hydroflow http://www.specialtech.co.uk/spshop/customer/product.php?productid=7144&cat=0&page= UV red http://www.specialtech.co.uk/spshop/customer/product.php?productid=3609&cat=961&page=1 Final build, just need to decide from these two pump's http://www.aqua-pcs.co.uk/laing-d5-vario-water-pump-12-barb-694-p.asp http://www.specialtech.co.uk/spshop/customer/product.php?productid=3497&cat=1048&page=1 Plus i need to get some rad grill's and maybe shrouding(might gut some 120's) Any opinion's, i was thinking the yellow one, because of the conversion nut being able to go from 1/2" to 3/8" if the need arised. My Antec 1200 came this morning, yay.
Also what do you think is the best flow path for me, Res > Pump > CPU > Rad > Res Res > Pump > Rad> CPU > Res
Ordered everything, i'll follow your suggested flow path Mark, thank's everyone for helping and giving opinion's, when i get her up and running in a few day's, i'll post picture's.
[img=http://img13.imageshack.us/img13/5794/pict0025org.th.jpg] Finished, buying a new graphic's card next month, might w/c it(GTX 285)