New Crysis WARHEAD Benchmark Tool BETA

One last question.....

If my crysis warhead has an autoexec.cfg, if i set benchmark to entushiast settings, it will benchmark entushiast or my autoexec.cfg?


Ok thx jampd, i was just guessing about results xP ty

 

Your autoexec.cfg you'll used. In ranked benchmark mode using an autoexec.cfg file will invalidate the results.

 

Comparison made between Vista 32U, Vista 64U and XP SP3 with 177.83

09/25/2008 00:49:53 - Microsoft® Windows Vista™ Ultimate 32-bit Service Pack 1

DirectX 9.0c ENTHUSIAST 1X @ Map: ambush @ 0 1680 x 1050 AA 0x
==> Framerate [ Min: 12.18 Max: 23.25 Avg: 18.86 ]

DirectX 9.0c ENTHUSIAST 1X @ Map: avalanche @ 0 1680 x 1050 AA 0x
==> Framerate [ Min: 9.86 Max: 24.97 Avg: 18.43 ]

DirectX 9.0c ENTHUSIAST 1X @ Map: frost @ 0 1680 x 1050 AA 0x
==> Framerate [ Min: 10.41 Max: 20.81 Avg: 17.56 ]

09/25/2008 02:11:43 - Microsoft® Windows Vista™ Ultimate 64-bit Service Pack 1

DirectX 9.0c ENTHUSIAST 1X @ Map: ambush @ 0 1680 x 1050 AA 0x
==> Framerate [ Min: 11.63 Max: 23.96 Avg: 18.94 ]

DirectX 9.0c ENTHUSIAST 1X @ Map: avalanche @ 0 1680 x 1050 AA 0x
==> Framerate [ Min: 9.36 Max: 24.48 Avg: 18.29 ]

DirectX 9.0c ENTHUSIAST 1X @ Map: frost @ 0 1680 x 1050 AA 0x
==> Framerate [ Min: 11.05 Max: 20.25 Avg: 16.96 ]

09/24/2008 23:36:53 - Microsoft Windows XP Professional Service Pack 3

DirectX 9.0c ENTHUSIAST 1X @ Map: ambush @ 0 1680 x 1050 AA 0x
==> Framerate [ Min: 13.51 Max: 24.42 Avg: 19.33 ]

DirectX 9.0c ENTHUSIAST 1X @ Map: avalanche @ 0 1680 x 1050 AA 0x
==> Framerate [ Min: 8.37 Max: 25.31 Avg: 18.35 ]

DirectX 9.0c ENTHUSIAST 1X @ Map: frost @ 0 1680 x 1050 AA 0x
==> Framerate [ Min: 11.55 Max: 21.51 Avg: 17.84 ]

 

Here's mine

I dont know why my min is 1.54 FPS that's really weird
But any way thanks for the nice tool

 

Thanks a lot

 

Mmmmm, I have too much free time in my hands right now and I´ve been thinking how to achieve better fps with lower resolutions........Maybe you could allow to enter CUSTOM RESOLUTIONS to try the timedemos.
For example, I want to test 960x600 or 1024x640 or 1360x850 (all 16:10 res.)
One tip....try http://andrew.hedges.name/experiments/aspect_ratio/ for an aspect ratio calculator

 

alright so i changed motherboards and now i can't use this utility, however crysis warheads work just fine, anyone got an idea? it crashes once it tries to load crysis, i saved the info:

Problem signature:
Problem Event Name: APPCRASH
Application Name: Crysis.exe
Application Version: 1.1.1.687
Application Timestamp: 00000000
Fault Module Name: StackHash_b06c
Fault Module Version: 0.0.0.0
Fault Module Timestamp: 00000000
Exception Code: c0000005
Exception Offset: fff83f37
OS Version: 6.0.6001.2.1.0.256.1
Locale ID: 1033
Additional Information 1: b06c
Additional Information 2: 3e6a23ba9954b508681701ad5c50b40a
Additional Information 3: a9a6
Additional Information 4: 940df9b5feef5e4f501b239589a49e94

the motherboard change is only temporary but yeah

 

Just downloaded .24, and it is actually .25. Another silent update? Also I see it now has a built in update function. Very nice.

 

Ok I found a bug in 0.25. After running the benchmark some of the buttons have turned to a different language:

 

After installing .NET 1.1 SP1 I get this error when clicking on 'execute' to start the benchmark



Works fine in vanilla .net 1.1, but Windows Update is on auto so SP1 just installs

 

EVGA GTX260 Core 216 712/1458/2430

FBWH Tool 0.17. For updates please visit www.framebuffer.com.br
Processor: Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz @ 4680 Mhz
CPU ID: Intel64 Family 6 Model 23 Stepping 6
Operating System: Microsoft® Windows Vista™ Ultimate 64 bits Service Pack 1
Physical memory: 4,00 GB
Display adapter: NVIDIA GeForce GTX 260 896 MB
Driver version: 7.15.11.7813 (20080917075500.000000-000)

==============================================================
TimeDemo Play Started , (Total Frames: 3502, Recorded Time: 92.69s)
!TimeDemo Run 0 Finished.
Play Time: 67.97s, Average FPS: 51.52
Min FPS: 33.91 at frame 72, Max FPS: 69.90 at frame 767
Average Tri/Sec: 4900895, Tri/Frame: 95123
Recorded/Played Tris ratio: 5.49
!TimeDemo Run 1 Finished.
Play Time: 66.00s, Average FPS: 53.06
Min FPS: 33.91 at frame 72, Max FPS: 69.90 at frame 767
Average Tri/Sec: 6567200, Tri/Frame: 123771
Recorded/Played Tris ratio: 4.22
!TimeDemo Run 2 Finished.
Play Time: 65.97s, Average FPS: 53.08
Min FPS: 33.91 at frame 72, Max FPS: 69.90 at frame 767
Average Tri/Sec: 6587081, Tri/Frame: 124093
Recorded/Played Tris ratio: 4.21
TimeDemo Play Ended, (3 Runs Performed)
==============================================================

//////////// Summary \\\\\\\\\\\\\

09/27/2008 14:02:58 - Microsoft® Windows Vista™ Ultimate 64 bits Service Pack 1

DirectX 9.0c GAMER 3X @ Map: ambush @ 0 1680 x 1050 AA 0x
==> Framerate [ Min: 33.91 Max: 69.90 Avg: 53.08 ]

 

I'm going to change the way resolution is selected by getting the available resolutions from system, so I'll be able to selected those fancy resolutions if they are available on your particular configuration.

Sounds like it worked, great!

Hmmmm, maybe it's another background process (AV, etc.)

Wow, thank you Sir, as always Crysis is slighty better on XP, and Vista 32 is better than 64 which is a pity...

Sorry, I don't know why that happened, I'm going to release build 0.26 which eliminates dependency on .NET Framework 1.1, now using .NET 2.0

Sir, there's no silent updates, I finished the build later at night and don't get a chance to update the first post here at Guru3D, but I'm gonna do it now.

Thank you for reporting, just fixed it. Just finishing tests before releasing build 0.26 with .NET Framework 2.0 support, no more .NET 1.1 issues on Vista 64.

NET 1.1 SP1 should not break program funcionality, but please wait 'till I release build 0.26 as stated above.

Great results man! Do you use your GTX 260 core 216 @ 712/1458/2430 24/7?

 

Yes. I think there is no problem with this settings. But only in 3d mode and I don't have my pc running every day at week.

Sorry by my bad English.

 

on windows xp x64 v0.25 crashes at the end of the benchmark with some errors in a small window. no results shown!

worked ok with 0.13

 

Problems for me, I'm using the steam version of crysis and the bench version .24...just tried with .25 and same issue

 

Well, I think all lcd 16:10 monitors out there supports these resolutions. All I did was create them in Nvidia CP, Manage Custom Resolutions and tested them OK (if they are 16:10 and the monitor is 16:10 they SHOULD work, no?)

That´s because there isn´t 64bits .EXE yet

Yeahhhh.....had problems installing 1.1 on Vista64. Windows reports them as potentially problematic

 

Please can you post a screenshot of the error?

The error ocurred before or after the benchmark run?

No, the resolutions you create are not always supported on other's computers by default.

 

The error occurs before the benchmark run (and there is no run because of the crash)

 

You may try running the program as administrator if you already didn't.

 

I did, same error. Oh, I'm using Server 2008 64...but it 's basically Vista 64