List the motherboard you are using with your 8800GT

I'm hoping the XFX 8800GT XXX Alpha Dog Ed works ok on my Mobo!!!


:nerd::biggun:

 

As will I. Well find out next tues

EDIT - Completely Solid.....

 

O my P5E !

 

just saw in the evga forums, they are relesaing an official bios for their gt cards next week to fix the fan problem ;D. Im using rivatuner at 70% now so far so good.
P5n-e sli

 

i would actually be shocked if it didnt work in your board,as long as your up to date on your boards bios and you fully remove all your ati software(or format/fresh os install) your probably looking at a flawless victory. gigabyte support is usually on the ball.

 

Add the Abit AN-M2 (probably the AN-M2HD too) to the list of incompatible mobos.

 

Gigabyte GA-965P-DS4 - all works fine with Xfx 8800gt alpha dog

 

ASROCK 939Dual-VSTA (1.30I) and the 8800gt works fine

 

Gigabyte GA-965P-S3 bios F7

 

See Specs...everything running sweeeeeet!

Regards....

 

Abit KN8 Ultra with the 14 BIOS.

Runs just fine.

 

Sounds good .. i Have a Abit I35 Pro where i can get my 8800 GT working as in i can see the display, and boot into windows, i can do all normal stuff on it, but when i comes to games or gfx benchmarks my 8800 GT does not work, i only get around 5 FPS no matter what.

Exact same setup with a 7800 GTX card ( my old card) gives me ~20 FPS ...

So, could u tell me your exact BIOS setup up, and if you put the 4pin molex power plug into the MOBO, are you using the upper or lower PCIEx16 port, well .. basically, can u tell me excatly how your system is set up ?

 

Asus P5N32-E Plus with 0803 bios works fine in single or SLI mode

 

ABIT KN9 BIOS 13. Everything is fine.

 

ASUS M2N32-SLI Deluxe Wi-Fi Edition

Works like a champ!!!!


TStetson
:boob:

 

Yes, I can tell you how I've got things setup Knuspar, np .

I would think there is very little difference in our BIOS setups as we are both OC'ing our CPU's highly with water cooling( Congrats on reaching 3.6 on your Q6600 Knuspar ). But here goes -

C1E Function = Disabled
EIST Function = Disabled
Almost everything else is @ default in BIOS except as it concerns RAID 0 and I have "OnChip Audio"/"IEEE 1394"/"Network Controller2" disabled.

ATX4P1 ( 4pin molex power plug ) is connected.

I am using PCIEXP1 ( upper 16 X PCIE slot ) for the 8800GT.

Also my 8800GT is water cooled ( 48C Max load temp ). Driver version I'm using is 169.04. Rivatuner for OC'ing. nHancer for driver settings. nV control panel is disabled through MSConfig. BIOS soft volt Mod also done ( 1.1volts ).

Hope this helps you Knuspar, and good luck .

G

 

hi,
I was asked by a friend if his ECS P33t-a is compatible to the 8800GT. Since its a very new board there should be no problem right? The board supports PCI-e 1.1. Has anyone tested this board with the 8800GT?

 

this will probably be an odd one for the bunch; supermicro x7dwa-n dual harpertowns, great for DCC, and a game or two

 

MSI Neo4-F, PCB v1.0 (model # MS-7125) with modded v1.D BIOS (Rebel Heaven) working fine.

XFX 8800GT 256MB Alpha Dog Edition.