WIN 7 64Bit stuck on welcome screen

Ive had no issues up until last night when i reboot it gets stuck on the welcome screen and after a min or so the screen goes black. I thought it was the windows update i did a few days before so i rebooted in safe mode and did a system restore and it didnt make a difference. I can boot into safe mode with no problems. I tried another video card and it booted to desktop so i thought it was my GTX 480. I rebooted again with the working video card and the same thing happend WTF. I tried repairing the system with the options available when booting but it came up with no errors etc. I tried different ram unplugging my sound card nothing. After about another 20 boot attempts it got past the welcome screen and im afraid to reboot again. I havent changed any settings or downloaded any thing that might be a issue. I checked for virus and spyware and came up with nothing. All my temps seem fine i want to try to clock back to stock speed on my cpu but dont want to reboot. Ive had a stable overclock since the summer not to sure if this could be an issue. My ram is at stock speeds also.

 

Click start > In the search bar type: Event Viewer

Open event viewer and look in Windows Logs > System

Check for errors in there and post what you see - it sounds like either a hanging service or driver problem

 

Most of the errors said The eamonm service failed. I listed another below it. This is greek to me so i appreciate the help.

Log Name: System
Source: Service Control Manager
Date: 2/15/2011 11:04:51 PM
Event ID: 7000
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: Andrew-PC
Description:
The eamonm service failed to start due to the following error:
The system cannot find the file specified.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Service Control Manager" Guid="{555908d1-a6d7-4695-8e1e-26931d2012f4}" EventSourceName="Service Control Manager" />
<EventID Qualifiers="49152">7000</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8080000000000000</Keywords>
<TimeCreated SystemTime="2011-02-16T04:04:51.009623500Z" />
<EventRecordID>114447</EventRecordID>
<Correlation />
<Execution ProcessID="524" ThreadID="528" />
<Channel>System</Channel>
<Computer>Andrew-PC</Computer>
<Security />
</System>
<EventData>
<Data Name="param1">eamonm</Data>
<Data Name="param2">%%2</Data>
</EventData>
</Event>


Log Name: System
Source: Service Control Manager
Date: 2/15/2011 10:30:04 PM
Event ID: 7011
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: Andrew-PC
Description:
A timeout (30000 milliseconds) was reached while waiting for a transaction response from the Spooler service.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Service Control Manager" Guid="{555908d1-a6d7-4695-8e1e-26931d2012f4}" EventSourceName="Service Control Manager" />
<EventID Qualifiers="49152">7011</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8080000000000000</Keywords>
<TimeCreated SystemTime="2011-02-16T03:30:04.326104300Z" />
<EventRecordID>115574</EventRecordID>
<Correlation />
<Execution ProcessID="528" ThreadID="692" />
<Channel>System</Channel>
<Computer>Andrew-PC</Computer>
<Security />
</System>
<EventData>
<Data Name="param1">30000</Data>
<Data Name="param2">Spooler</Data>
</EventData>
</Event>

 

eamonm: Is part of ESET NOD32

Spooler service is for the printer.

If you are not using NOD32, try running the removal tool, if you are, use the removal tool and reinstall it

For the print spooler error - Click start > type: services.msc

Find the print spooler service, and set it to delayed start until you find the real issue.


To attempt repair of any damaged system files you can open an elevated command prompt (Right click > Run as admin) and type:

sfc /scannow

Let it scan, and reboot if it tells you it has repaired files

 

I get this error when trying to select auto/delayed start for printer spool :Error 87 parameter incorrect. I did the scan and there where no errors. I will try to reinstall nod32 here are so more errors i found i was trying to enter safe mode with command prompt and networking so im not to sure if these are related. If it happens again i will look for the first error in the log. Thanks alot for your help.

Log Name: System
Source: Service Control Manager
Date: 2/15/2011 10:41:10 PM
Event ID: 7001
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: Andrew-PC
Description:
The Network Location Awareness service depends on the Network Store Interface Service service which failed to start because of the following error:
The dependency service or group failed to start.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Service Control Manager" Guid="{555908d1-a6d7-4695-8e1e-26931d2012f4}" EventSourceName="Service Control Manager" />
<EventID Qualifiers="49152">7001</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8080000000000000</Keywords>
<TimeCreated SystemTime="2011-02-16T03:41:10.030851500Z" />
<EventRecordID>114286</EventRecordID>
<Correlation />
<Execution ProcessID="440" ThreadID="444" />
<Channel>System</Channel>
<Computer>Andrew-PC</Computer>
<Security />
</System>
<EventData>
<Data Name="param1">Network Location Awareness</Data>
<Data Name="param2">Network Store Interface Service</Data>
<Data Name="param3">%%1068</Data>
</EventData>
</Event>

Log Name: System
Source: Service Control Manager
Date: 2/15/2011 10:41:10 PM
Event ID: 7001
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: Andrew-PC
Description:
The SMB 2.0 MiniRedirector service depends on the SMB MiniRedirector Wrapper and Engine service which failed to start because of the following error:
The dependency service or group failed to start.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Service Control Manager" Guid="{555908d1-a6d7-4695-8e1e-26931d2012f4}" EventSourceName="Service Control Manager" />
<EventID Qualifiers="49152">7001</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8080000000000000</Keywords>
<TimeCreated SystemTime="2011-02-16T03:41:10.030851500Z" />
<EventRecordID>114285</EventRecordID>
<Correlation />
<Execution ProcessID="440" ThreadID="444" />
<Channel>System</Channel>
<Computer>Andrew-PC</Computer>
<Security />
</System>
<EventData>
<Data Name="param1">SMB 2.0 MiniRedirector</Data>
<Data Name="param2">SMB MiniRedirector Wrapper and Engine</Data>
<Data Name="param3">%%1068</Data>
</EventData>
</Event>

Log Name: System
Source: Service Control Manager
Date: 2/15/2011 10:41:10 PM
Event ID: 7001
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: Andrew-PC
Description:
The SMB 1.x MiniRedirector service depends on the SMB MiniRedirector Wrapper and Engine service which failed to start because of the following error:
The dependency service or group failed to start.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Service Control Manager" Guid="{555908d1-a6d7-4695-8e1e-26931d2012f4}" EventSourceName="Service Control Manager" />
<EventID Qualifiers="49152">7001</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8080000000000000</Keywords>
<TimeCreated SystemTime="2011-02-16T03:41:10.030851500Z" />
<EventRecordID>114284</EventRecordID>
<Correlation />
<Execution ProcessID="440" ThreadID="444" />
<Channel>System</Channel>
<Computer>Andrew-PC</Computer>
<Security />
</System>
<EventData>
<Data Name="param1">SMB 1.x MiniRedirector</Data>
<Data Name="param2">SMB MiniRedirector Wrapper and Engine</Data>
<Data Name="param3">%%1068</Data>
</EventData>
</Event>

Log Name: System
Source: Service Control Manager
Date: 2/15/2011 10:41:10 PM
Event ID: 7001
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: Andrew-PC
Description:
The SMB MiniRedirector Wrapper and Engine service depends on the Redirected Buffering Sub Sysytem service which failed to start because of the following error:
A device attached to the system is not functioning.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Service Control Manager" Guid="{555908d1-a6d7-4695-8e1e-26931d2012f4}" EventSourceName="Service Control Manager" />
<EventID Qualifiers="49152">7001</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8080000000000000</Keywords>
<TimeCreated SystemTime="2011-02-16T03:41:10.030851500Z" />
<EventRecordID>114283</EventRecordID>
<Correlation />
<Execution ProcessID="440" ThreadID="444" />
<Channel>System</Channel>
<Computer>Andrew-PC</Computer>
<Security />
</System>
<EventData>
<Data Name="param1">SMB MiniRedirector Wrapper and Engine</Data>
<Data Name="param2">Redirected Buffering Sub Sysytem</Data>
<Data Name="param3">%%31</Data>
</EventData>
</Event>

Log Name: System
Source: Service Control Manager
Date: 2/15/2011 10:41:10 PM
Event ID: 7001
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: Andrew-PC
Description:
The Workstation service depends on the Network Store Interface Service service which failed to start because of the following error:
The dependency service or group failed to start.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Service Control Manager" Guid="{555908d1-a6d7-4695-8e1e-26931d2012f4}" EventSourceName="Service Control Manager" />
<EventID Qualifiers="49152">7001</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8080000000000000</Keywords>
<TimeCreated SystemTime="2011-02-16T03:41:10.015251500Z" />
<EventRecordID>114282</EventRecordID>
<Correlation />
<Execution ProcessID="440" ThreadID="444" />
<Channel>System</Channel>
<Computer>Andrew-PC</Computer>
<Security />
</System>
<EventData>
<Data Name="param1">Workstation</Data>
<Data Name="param2">Network Store Interface Service</Data>
<Data Name="param3">%%1068</Data>
</EventData>
</Event>

Log Name: System
Source: Service Control Manager
Date: 2/15/2011 10:41:10 PM
Event ID: 7001
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: Andrew-PC
Description:
The Network Store Interface Service service depends on the NSI proxy service driver. service which failed to start because of the following error:
A device attached to the system is not functioning.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Service Control Manager" Guid="{555908d1-a6d7-4695-8e1e-26931d2012f4}" EventSourceName="Service Control Manager" />
<EventID Qualifiers="49152">7001</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8080000000000000</Keywords>
<TimeCreated SystemTime="2011-02-16T03:41:10.015251500Z" />
<EventRecordID>114281</EventRecordID>
<Correlation />
<Execution ProcessID="440" ThreadID="444" />
<Channel>System</Channel>
<Computer>Andrew-PC</Computer>
<Security />
</System>
<EventData>
<Data Name="param1">Network Store Interface Service</Data>
<Data Name="param2">NSI proxy service driver.</Data>
<Data Name="param3">%%31</Data>
</EventData>
</Event>

Log Name: System
Source: Service Control Manager
Date: 2/15/2011 10:41:10 PM
Event ID: 7001
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: Andrew-PC
Description:
The DNS Client service depends on the NetIO Legacy TDI Support Driver service which failed to start because of the following error:
A device attached to the system is not functioning.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Service Control Manager" Guid="{555908d1-a6d7-4695-8e1e-26931d2012f4}" EventSourceName="Service Control Manager" />
<EventID Qualifiers="49152">7001</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8080000000000000</Keywords>
<TimeCreated SystemTime="2011-02-16T03:41:10.015251500Z" />
<EventRecordID>114280</EventRecordID>
<Correlation />
<Execution ProcessID="440" ThreadID="444" />
<Channel>System</Channel>
<Computer>Andrew-PC</Computer>
<Security />
</System>
<EventData>
<Data Name="param1">DNS Client</Data>
<Data Name="param2">NetIO Legacy TDI Support Driver</Data>
<Data Name="param3">%%31</Data>
</EventData>
</Event>

Log Name: System
Source: Service Control Manager
Date: 2/15/2011 10:41:10 PM
Event ID: 7001
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: Andrew-PC
Description:
The DHCP Client service depends on the Ancillary Function Driver for Winsock service which failed to start because of the following error:
A device attached to the system is not functioning.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Service Control Manager" Guid="{555908d1-a6d7-4695-8e1e-26931d2012f4}" EventSourceName="Service Control Manager" />
<EventID Qualifiers="49152">7001</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8080000000000000</Keywords>
<TimeCreated SystemTime="2011-02-16T03:41:10.015251500Z" />
<EventRecordID>114279</EventRecordID>
<Correlation />
<Execution ProcessID="440" ThreadID="444" />
<Channel>System</Channel>
<Computer>Andrew-PC</Computer>
<Security />
</System>
<EventData>
<Data Name="param1">DHCP Client</Data>
<Data Name="param2">Ancillary Function Driver for Winsock</Data>
<Data Name="param3">%%31</Data>
</EventData>
</Event>

 

holy **** that's a lot of fatal error for a lot of system services wow. Can you try to revert to an old restore point?

deltatux

 

yea i did and it didnt help but i eventually made it to my desktop and am afraid to reboot. Im thinking its my Esset so i might uninstall it.

 

try f8 on boot and choose last known good configuration option , this sometimes helps

 

This is typical of a oc system as yours being unstable. Put everything to stock speed again and I bet it will work fine. You said you had stable oc for a long time thus I would think maybe you need to redo your cpu thermal paste again and make sure and clean all your fans etc to make it stable again.

 

Sounds like his OC wasn't really stable....or he has damaged components...

 

Put everything back to stock settings.

Remove all memory except for one 2GB stick.

 

I uninstalled Eset and everything is fine.

 

hmmm, so I guess ESET was screwy ... NOD32 works fine here on my system lol.

deltatux

 

A friend of mine has the exact same problem after he installed the latest updates for Windows (released yesterday). He has the 64 bit edition of Windows 7.

EDIT - The laptop does not even want to boot with a Windows 7 DVD. Maybe this is another kind of problem.