The AMD Ryzen All In One Thread /Overclocking/Memory Speeds & Timings/Tweaking/Cooling Part 2

Discussion in 'Processors and motherboards AMD' started by vbetts, Sep 24, 2018.

  1. OnnA

    OnnA Ancient Guru

    Messages:
    17,852
    Likes Received:
    6,741
    GPU:
    TiTan RTX Ampere UV
    Try 3733MHz or 3800 CL16 :p
     
  2. Horus-Anhur

    Horus-Anhur Ancient Guru

    Messages:
    8,638
    Likes Received:
    10,691
    GPU:
    RX 6800 XT
    Those voltages are a bit high for just 3200Mt/s.
    You should definitely run higher clocks for memory. This will lower your real latencies and increase memory bandwidth.
    3600-1800 should be very easy to do. 3900-1900 is a bit harder, but attainable.

    Here is mine for an example.

    ZenTimings_Screenshot.png
     
  3. SplashDown

    SplashDown Maha Guru

    Messages:
    1,138
    Likes Received:
    409
    GPU:
    EVGA 980ti Classy
    OK, thanks for the advice. There are some voltage adjustments I don't know how to yet. The VDD adjustments I think it is.... or VDOC ... lol This Asus board has so many frickin' adjustment settings losing my mind and still learning this chips capabilities. I see you have geardown off too I haven't messed with that yet or the MCLK/FCLK. Also don't know about the load line calibration and phase control this board has alot of adjustments that can be done and I'm sure thats prob why some of my voltage settings are high. I did put phase on extreme for soc and cpu ...loadline on auto right now. Prob more I'm missing thats why I was asking questions.
     
    Last edited: Jan 11, 2023
    chispy likes this.
  4. OnnA

    OnnA Ancient Guru

    Messages:
    17,852
    Likes Received:
    6,741
    GPU:
    TiTan RTX Ampere UV

  5. Horus-Anhur

    Horus-Anhur Ancient Guru

    Messages:
    8,638
    Likes Received:
    10,691
    GPU:
    RX 6800 XT
    Finally managed to get 4X8Gb working on my motherboard. And this is the result.
    Wasn't able to turn off GDM. But the performance difference is not that big.

    ZenTimings_Screenshot.png

    With 2X16, GDM off and the pervious timings, I had 57.3 Read. And 57.4 ns of Latency.
    aida.png
     
  6. vestibule

    vestibule Ancient Guru

    Messages:
    2,090
    Likes Received:
    1,328
    GPU:
    Radeon RX6600XT
    @Horus-Anhur
    Enable ray tracing on BF5 and watch that game gobble up ram.
     
    chispy likes this.
  7. Horus-Anhur

    Horus-Anhur Ancient Guru

    Messages:
    8,638
    Likes Received:
    10,691
    GPU:
    RX 6800 XT
  8. OnnA

    OnnA Ancient Guru

    Messages:
    17,852
    Likes Received:
    6,741
    GPU:
    TiTan RTX Ampere UV
  9. OnnA

    OnnA Ancient Guru

    Messages:
    17,852
    Likes Received:
    6,741
    GPU:
    TiTan RTX Ampere UV
    lol

     
    chispy likes this.
  10. Horus-Anhur

    Horus-Anhur Ancient Guru

    Messages:
    8,638
    Likes Received:
    10,691
    GPU:
    RX 6800 XT

  11. ultraex2003

    ultraex2003 Master Guru

    Messages:
    271
    Likes Received:
    93
    GPU:
    Amd 2x290 Cfx
    hydra 1.3a pro
    5600 b2 stepping @ 4850 co -30 1.20 + 3866 cas 15
    vcvcgv.jpg dfdds.jpg
     
    chispy and Horus-Anhur like this.
  12. kanenas

    kanenas Master Guru

    Messages:
    512
    Likes Received:
    385
    GPU:
    6900xt,7800xt.
    Try this,trrdl 5,tras 24,twr 12,trdwr 8 and let's correct the mistake that everyone makes,we do a simple arithmetic operation trp + trcdrd + trrp = 39, so the value of trc cannot be greater than 39, you have 42,
    alternately change trp to 8 and trc to 41.
     
  13. Horus-Anhur

    Horus-Anhur Ancient Guru

    Messages:
    8,638
    Likes Received:
    10,691
    GPU:
    RX 6800 XT
    Tras on AMD is overwritten by tRC. So it's almost pointless to change it.
    Considering he has a TFAW of 16, the ideal window for tRRDL and rRRDs is 4.
     
    tunejunky and kanenas like this.
  14. kanenas

    kanenas Master Guru

    Messages:
    512
    Likes Received:
    385
    GPU:
    6900xt,7800xt.
    tras is high try 26-24,
    trdrddd use 4,twrwrdd use 6,
    for trc use 35 and not lower
    this value comes from the sum of the values of trp + trcdrd + trtp which in your case is 13+16+6=35,
    one more additional piece of information is that when the trc value is smaller than tras, it doesn't matter what value you give it, the trc value exceeds it and the register doesn't work, it's a normal function of the ram.
     
    chispy likes this.
  15. Horus-Anhur

    Horus-Anhur Ancient Guru

    Messages:
    8,638
    Likes Received:
    10,691
    GPU:
    RX 6800 XT
    Like I said before, tRas is inconsequential on AMD.
    tRC won't go lower than 44, or I get errors in testing.
    BTW, tRC=tRAS + tRP

    After posting that screenshot, I found out that it wasn't stable with y-cruncher. Bumping vdimm to 1.4v solved the issue.
    I still have to try trdrddd at 4,twrwrdd at 6 with the new voltage.
     
    chispy and tunejunky like this.

  16. Horus-Anhur

    Horus-Anhur Ancient Guru

    Messages:
    8,638
    Likes Received:
    10,691
    GPU:
    RX 6800 XT
  17. JJayzX

    JJayzX Master Guru

    Messages:
    534
    Likes Received:
    50
    GPU:
    MSI Trio 4090 W/C
    I was going to specifically ask about this, thanks for posting. This is what I currently have but this is with just prior knowledge and not updated info, which I was just about to ask for.
     

    Attached Files:

    chispy likes this.
  18. chispy

    chispy Ancient Guru

    Messages:
    9,979
    Likes Received:
    2,693
    GPU:
    RTX 4090
    It seems that this helping guide i made 6 years ago still going strong today :) . I'm glad it still alive and it's serving it's purpose very well.

    I started this thread / guide in Feb 22 , 2017 :D


    Screenshot 2023-01-26 100716.jpg
     
    user1, The1, Horus-Anhur and 3 others like this.
  19. Kool64

    Kool64 Ancient Guru

    Messages:
    1,658
    Likes Received:
    784
    GPU:
    Gigabyte 4070
    Ryzen sure has come a long way.
     
    chispy likes this.
  20. ultraex2003

    ultraex2003 Master Guru

    Messages:
    271
    Likes Received:
    93
    GPU:
    Amd 2x290 Cfx
    hydra 1.3a pro
    5600 b2 stepping after few changes with volt and boost my last skor (single and multi)
    gffvfvfgvfggf.jpg
     
    chispy likes this.

Share This Page