JONSBO launched an M.2 SSD cooler M.2-20 with a 20mm cooling fan. It can effectively cool the heat created by the SSD transported to the aluminum heat sink since it is equipped with a 20 x 20 x 10m... JONSBO M.2-20 M.2 SSD cooler comes included with a 20mm fan.
14,000 rpm? I wouldn't want that thing anywhere near my PC. It would belong to my workshop, among the other power tools requiring hearing protection from the user.
"your M2 is pretty cool, with this cooler" "???, I DON'T UNDERSTAND, TALK LOUDER, THE COOLER MAKE A BIT OF NOISE!!!"
Looks like a complete cock up product to me. Lets face it, one heck of a lot of M2 slots will be underneath a gfx card in situ and a fink the clearance is just 6mm from the top of any pc-e slot to the belly of any card.
I have a 980 256 GB and it runs 43 Degrees tops with a simple heatsink added. I don't really understand where tne 90+ degrees come from.
14k rpm? That calls for a deathpenalty (I'm obviously not serious...just pointing it out in case it's not clear..)
Guess you need this if you have a 3090 dumping heat directly onto a very fast 4.0 NVME you are hammering.
Haha that would be an even worse place to put it - it'd suck up all the shop dust. That's why many industrial PCs are fanless. This is really only suitable for a home server and nothing else. A legit server would have enough airflow where the SSD wouldn't need a fan.
14,000 rpm lol , it reminds me of those little dentist drills / tools they use on you . It might sound like it ! ** sorry just had too ...
Looks like it would work just as well with no fan, but no shroud around the heatsink. And with less energy and noise. I agree with you fellow gurus.
Well aparently PCI-E 5.0 m.2 nvme ssds are gonna be hot and it might be necessary to actively cool them if you want top notch performance. Also it is clearly written that it produces 24 dBA. With some manufacturer tomfoolery lets say its 28 dBA. Thats still quiet in comparison to most PCs out there. Also if its really that loud just slap a noctua 20x20 fan on to it. They spin with 5k at ~15 dBA which is pretty much inaudible. I think the reactions are over the top. I like the look. It's clean af
Is it only me ? That when I see crammed small airfans like that advertised it is an instant (do not touch ever ) label for me
Just a heads up. I know you did not ask but that Riser Cable could be a real head ache! Nice looking rig so far. When its done could you post it up.
This is the before. Ended up swapping out the board, cpu block, RM 1000x, added a vertical gpu mount, 2 360mm alphacool rads, XSPC white coolant, better loop drain, and 7 antec fans. This is the finished one. No LEDS had been tweaked yet. I run a static blue. I have no issues with it so far. Works on 4.0 like its supposed too. Thank you. Been a lot of work lately to get it nice. Its actually done. Just was a photo from when i was putting together. I rarely see nice aoft tubing builds. Ill post up pics and specs later today after work.