Radeon-ID Community Driver: Hybrid - Release Nebula 23.11.1 WHQL

running rebar on 290X + ASUS APEX IX@X + i7-9700K :-D

 

You're right




Edit: Tried enabling and disabling PCI-E Idle State and rebooting the machine in both attempts
and still running at x16 1.1

Edit2: Just read some posts back, one post in Spanish by @cucaracha30 saying that when you're using the GPU it will change it's state so i've just did the test myself and that's right, so the stuttering / drop frames problem is something else in my case

 

anyone know why my office UI is like this when i choose high performance in power plan setting?
A8 6410 with R5 Graphics
R5 M330 Nimez 22.2.2

 

Winword is trying to use 2nd gpu, you have to add them manually the winword.exe to powersaving graphics.

 

how to get 27.20.15030.3002 driver version?I'm currently running at 26.20.15032.20...

UPDATE: A reinstall fixed the problem.

 

...sorry was a mistake...

 

One question:The GPU's that support resizable bar are from the gcn 2.0 architecture right?

 

Thanks for this. Tested 4 firepro cards and it all seemed to work well. Windows 10, 5300G.

Didn't seem to change performance much but still nice to have support none-the-less.

 

Okay so I activated SAM in the BIOS and activated it in the NimeZ driver cli thingy

This is as far as I get:



Any idea how I get it to work?
Or is this the working state?

Thanks in advance

 

Well, Unfortunately my gpu doesn't work with this driver. I have a notebook with an AMD A12 9720P with an integrated R7, that works and a RX 540, witch for some reason is recognized as a RX 550X Series and for that, the dedicated gpu simply doesn't work.

 

Well, now check in the games and make sure that it does not really work.

 

You may need Windows 11 to get these feature working in order to use 2nd gpu. Or using old version 19.11.2

Try enable Rebar with ASIC mode, then reboot, SAM must be visible

 

Best of the best should be games on Decima Engine, Horizon zero dawn or Death Stranding. Enabling rbar causing so much stutter for me, even when my RIG doesnt support rbat at all

 

Oh sorry that was my fault. When I switched to the 2022 Release, everything was fine. Sorry to trouble you.
This driver is just awesome.The bugs I encountered in some newer 2d games have been solved very well, thank you : )
Also ask, will the driver for Terascale be updated in the future?

 

Here a couple of screens. Could i be sure that rbar it is working ? Does not matter if it gain or lose some fps, i would only undestand. Tnx

 

Terascale Dx11 2022 Insight Release option LTS Adrenalin Terascale Dx11.

Adrenalin 2020 UI V4 (single GPU) driver-install variant works like a charm on the laptop with AMD Radeon HD 7640G graphics onboard. Windows 11 runs so smooth even with x1 4GB DDR3 Memory RAM stick, that's crazy

--
Maybe someone remembers, but I was getting like a blue screen before and sometimes for now. And it seems that this was solved by disabling the fast startup in the Control Panel (Windows)

https://forums.guru3d.com/threads/3...er-pack-released.436611/page-171#post-5990643

 

all driver nimez terascale it gives me an error 43 why?
use winn 11 cpu a10 5750m gpu 8650g+7670m I'm missing a library?

 

Is your internet already disconnected before installing these?

Just tellin that WU is very aggresive when the system has gpu, but no graphics drivers are installed, it tries to download itself when connected to the internet

 

Anyone having any problems using hwinfo (latest stable) while playing a game with this version of drivers (or the previous one)?

After 10-20' the game crashes (BFV), hwinfo crashes, driver/windows recover after 20'' (driver settings don't reset). I had the same problem with 22.2.2 (non-modded version).

TY

 

with win 11 it gives me a blue screen unable booting, disable internet and fast start