RTX 3060 with 470.05 not hashrate restricted

Tested on PCI-E Gen3 x4 - not working (as single card). On PCI-E Gen3 16x working fine.

 

Has anyone confirmed if this works on a PCIE 2.0 x16 slot? I’ve seen some mixed reports on whether it just needs to be x16 or x16 and 3.0. Thanks!

 

Didn't work for me on a Z77 with PCIE 2.0 but works fine on B450 with 3.0.

 

Don't work with PCIE 2.0 x16.

 

My EVGA 3060 is still getting 25 mh/s

-Uninstalled with DDU
-Custom, clean install 470.05
-Directly connected to Mobo on PCIe 3.0 x16
-HDMI output to monitor
-Disabled ReBAR in BIOS

I'm out of ideas. I tried uninstalling/reinstalling 4+ times

EDIT: Found my issue. My mobo bumps my 2nd PCIe down to x4 when using 2 GPU's

 

I have a Evga 3060 XC in the 2nd slot under a 2080 TI running in PCIE Gen 3 x8 doing 49mh. Both cards are hashing away with no issues. All I did was DDU the old drivers. Install the new 3060. Install 470.05. Reboot, and the 3060 was working the way it should.

 

Working on 2x Palit 3060, on ASUS Gaming X470F, I am geting 47, 48 MH/s on both cards.

I try on board that have 2.0 PCIe, does not work.
I try on extenders, does not work.

If somebody get a solution for extenders, or 2.0 pci-e...that will be great! I think we are all waiting for this

 

Working on 2x Palit 3060, on ASUS Gaming X470F, I am geting 47, 48 MH/s on both cards.

I try on board that have 2.0 PCIe, does not work.
I try on extenders, does not work.

If somebody get a solution for extenders, or 2.0 pci-e...that will be great! I think we are all waiting for this

 

https://www.pcgamer.com/nvidia-rtx-3060-hash-rate-limiter-driver-bypass-removed/

so that's why 470.05 disappeared, indeed.

Thanks Nvidia, entire limiter starting to look like a PR stunt at this point.

 

Hi guys, can somebody reupload that 470.05 driver? thanks

 

Ill retract this didn't know it has to be on a true 16x I guess my other 16x is 4x when 2 GPU installed.

This is game changer

 

Hey guys. I installed the driver and I'm getting 41.33 mh/s ETH RTX 3060 GAMING OC 12G. I have another 3060ti, can you recommend me a motherboard that I can use to have both GPU's hooked up to it for mining?

 

Here you go, this one worked for me https://drive.google.com/file/d/1CePKNsIZPC0JDdAVeAGh9Ue8RdTubMUs/view?usp=sharing

 

Andreas Schilling from HardwareLuxx got a statement from Nvidia:

„A developer driver inadvertently included code used for internal development which removes the hash rate limiter on RTX 3060 in some configurations.

The driver has been removed."

https://twitter.com/aschilling/status/1371765349440483330

 

You are welcome Red Panda Mining



Toms Hardware also credits this thread:
https://www.tomsguide.com/news/nvid...limiter-has-an-embarrassingly-easy-workaround

PCGamer:
https://www.pcgamer.com/cryptocurrency-limiter-nvidia-driver-workaround/

Thanks everyone in this thread who helped confirm!!!

 

So, would a motherboard like this work with 4x 3060's if set to 4-way x8 PCI-E Gen 3? Says it will fit 4 double wide cards.

 

Yes that should work for 4 3060s.

 

ASUS WS X299 - 7 3060

 

Hi everyone!
Work it the 3060 and rx6800 as x8x8? Mother chip is x470.
3060 and 1050ti gave a full hashrate where 3060 was second.

 

3060 takes 2 slots