Download: MSI Afterburner 4.6.3 Beta 2

Discussion in 'Frontpage news' started by Hilbert Hagedoorn, Sep 18, 2020.

  1. Unwinder

    Unwinder Ancient Guru Staff Member

    Messages:
    17,127
    Likes Received:
    6,691
    Considering that you're on 1070, I'd say that you have close to 0 chances to see the scanner improved for you. Legacy scanner API (the only one supporting Pascals) is deprecated now and will not get any future updates from NV side. New OC scanner (NVAPI based) doesn't support Pascals at all at the moment and quite possible it will support RTX 20x0 and 30x0 series only forever.
     
    jura11 likes this.
  2. Astyanax

    Astyanax Ancient Guru

    Messages:
    17,011
    Likes Received:
    7,353
    GPU:
    GTX 1080ti
    just because you can do 150+ doesn't mean 150+ is stable under all cases.
     
    GSDragoon likes this.
  3. TheDeeGee

    TheDeeGee Ancient Guru

    Messages:
    9,636
    Likes Received:
    3,413
    GPU:
    NVIDIA RTX 4070 Ti
    You gotta read, i use +135 for artifact safe zone.

    Anyways, OCing a GPU is easy enough, just keep Heaven open and raise core until artifacts show up, then go 15 below that as your OC.
     
  4. mannix

    mannix Active Member

    Messages:
    72
    Likes Received:
    18
    GPU:
    MSI GTX1070 ArmorOC
    Thanks, that would be nice :)
    I will revert to the previous version
     

  5. mannix

    mannix Active Member

    Messages:
    72
    Likes Received:
    18
    GPU:
    MSI GTX1070 ArmorOC
    Yep wasn't expecting really any improvement. It's fine as it is today anyway, works enough to create a very conservative and safe baseline that can be adjusted manually.
    I'm going to upgrade soon but this 1070 will go into a secondary PC so would be nice to have it working with the new releases of AB.
     
  6. Thunk_It

    Thunk_It Master Guru

    Messages:
    290
    Likes Received:
    51
    GPU:
    Asus 2080ti Turbo
    Thank you Guru3D for continuing to support this excellent software!
     
    Drerex likes this.
  7. bernek

    bernek Ancient Guru

    Messages:
    1,632
    Likes Received:
    93
    GPU:
    Sapphire 7900XT
    I get this error when I try OC Scan on 1080TI...

    01:27:36 Connected to MSI Afterburner control interface v2.3
    01:27:37 GPU1 : VEN_10DE&DEV_1B06&SUBSYS_67963842&REV_A1&BUS_10&DEV_0&FN_0
    01:27:37 Start scanning, please wait a few minutes
    01:27:37 Scan failed with code 22h
     
  8. Unwinder

    Unwinder Ancient Guru Staff Member

    Messages:
    17,127
    Likes Received:
    6,691
    It was repeated in multiple places (including this thread) that currently NVIDIA do not support Pascal GPUs in their new OC Scanner implementation. There are no comments from their side on any plans to support it in future.
     
    jura11 and bernek like this.
  9. bernek

    bernek Ancient Guru

    Messages:
    1,632
    Likes Received:
    93
    GPU:
    Sapphire 7900XT
    So am I seeing any benefits of using this version with manual OC ? all those API help this 1080ti in any way ? or I can just stick to the good old working version ?
     
  10. Slammy

    Slammy Member Guru

    Messages:
    116
    Likes Received:
    31
    GPU:
    ASUS 7800GTX
    I dont have the 3080 skin. Downloaded from MSI directly
     

  11. Drerex

    Drerex Member

    Messages:
    25
    Likes Received:
    55
    GPU:
    MSI Suprim X 3090
    Thunk_It and eGGroLLiO like this.
  12. Dragondale13

    Dragondale13 Ancient Guru

    Messages:
    1,527
    Likes Received:
    244
    GPU:
    GTX 1070 AMP! • H75
    The animated fan on the Indigo Skin by Drerex Design has me captivated...now it's the only one that matters.
     
    DannyD and Drerex like this.
  13. Drerex

    Drerex Member

    Messages:
    25
    Likes Received:
    55
    GPU:
    MSI Suprim X 3090
    Thanks @Dragondale13! Thought the animated fan would be a nice touch.
     
    Dragondale13 likes this.
  14. Dragondale13

    Dragondale13 Ancient Guru

    Messages:
    1,527
    Likes Received:
    244
    GPU:
    GTX 1070 AMP! • H75
    Indeed, you've set the bar once again, awesome work.
     
    DannyD likes this.
  15. Globespy

    Globespy Guest

    Messages:
    8
    Likes Received:
    3
    GPU:
    1080ti
    Thanks for the new beta!
    Love the new skins, wondering if it's a known issue with the performance graph stuff that doesn't seem to detach? No matter what skin I use the same thing happens when trying to detach the performance specs window, I just see a floating 'X' but nothing else.
    Hopefully this is a known problem with a fix incoming.
    I tried the OC scanner, but it was unstable in a few titles.
    Manual OC goes to 2055, sometimes 2040 in a few titles, +420 Mem overclock (MSI RTX3080 Ventus OC) - seems like a pretty good overclock, max temps never above 63C on air (Lian Li PC-011D case with 9 fans)
     

  16. Astyanax

    Astyanax Ancient Guru

    Messages:
    17,011
    Likes Received:
    7,353
    GPU:
    GTX 1080ti
    I don't have this problem.
     
  17. Dragondale13

    Dragondale13 Ancient Guru

    Messages:
    1,527
    Likes Received:
    244
    GPU:
    GTX 1070 AMP! • H75
    The answer for the floating x problem is to just mouse over it you'll get resize arrows, pull to resize. I've encountered this while switching skins.
     
    DannyD likes this.
  18. Karillo

    Karillo New Member

    Messages:
    1
    Likes Received:
    0
    GPU:
    Xfire 6970m
    Hi guys, can you confirm that for the moment the new oc scanner is not compatible with notebook gpu? I have a 2080 max-q and I get the error "scan failed with code 22h". Thank you!
     
  19. DarkPoee

    DarkPoee Guest

    Messages:
    108
    Likes Received:
    2
    GPU:
    RTX 3080 TI FTW3
    I have a 1660 Ti and it fails with 22h and then 10h also... But 1660 Ti is Turing... So?
     
  20. Unwinder

    Unwinder Ancient Guru Staff Member

    Messages:
    17,127
    Likes Received:
    6,691
    So I need to repeat one more time that it is NVIDIA technology?
     

Share This Page