HP Enterprise SSD users, please check and update firmware (before a kill-switch kicks in)

Discussion in 'Frontpage news' started by Hilbert Hagedoorn, Feb 24, 2020.

  1. Hilbert Hagedoorn

    Hilbert Hagedoorn Don Vito Corleone Staff Member

    Messages:
    48,388
    Likes Received:
    18,559
    GPU:
    AMD | NVIDIA
  2. RiVaL

    RiVaL Guest

    Messages:
    8
    Likes Received:
    2
    GPU:
    KFA2 RTX 2070 Super
    Many thanks, Hilbert. That's a valuable info, indeed.
     
    DG21 likes this.
  3. DG21

    DG21 Member Guru

    Messages:
    124
    Likes Received:
    49
    GPU:
    1080Ti WF Extreme
    "A series of their storage units will drop into complete failure after precisely 32,768 hours of usage." - Does this smell like planned obsolescence? NOO......
     
  4. Yikes. Sounds like a major hassle for IT folk in companies that run hp equipment.
     
    386SX likes this.

  5. HeavyHemi

    HeavyHemi Guest

    Messages:
    6,952
    Likes Received:
    960
    GPU:
    GTX1080Ti

    I'm not sure why you're finding this confusing. This isn't a kill switch or whatever thing you're confused by. It's simply a bug in the firmware that disables certain models after a precise number of hours of operation. They could not have been more clear:


    https://mspoweruser.com/hp-enterprise-ssd-failure/

    HPE was notified by a Solid State Drive (SSD) manufacturer of a firmware defect affecting certain SAS SSD models (reference the table below) used in a number of HPE server and storage products (i.e., HPE ProLiant, Synergy, Apollo, Synergy D3940 Storage Module, HPE ConvergedSystem, D3000/D6000/D6020 Disk Enclosures, MSA Storage, StoreEasy 1000 Storage, StoreVirtual 4335 Hybrid Storage and StoreVirtual 3000 Storage are affected).

    NOTE: The following platforms are NOT AFFECTED by this issue: HPE 3PAR StoreServ Storage, D8000 Disk Enclosure, Nimble Storage, Primera Storage, StoreOnce Systems, XP Storage, HPE StoreEasy 5000 Storage, SimpliVity, Cloudline, Moonshot and Edgeline.

    The issue affects SSDs with an HPE firmware version prior to HPD8 that results in SSD failure at 32,768 hours of operation (i.e., 3 years, 270 days 8 hours). After the SSD failure occurs, neither the SSD nor the data can be recovered. In addition, SSDs which were put into service at the same time will likely fail nearly simultaneously.

    Here's a working link to the notice
    https://support.hpe.com/hpesc/public/docDisplay?docId=emr_na-a00092491en_us

    Right... good idea, firmware bug that the maker outs you with because....'rollseyes'.

    For sure, and you'd hope that HP has proactively notified every single customer that could be affected.
     
    Ridiric and Luc like this.
  6. Hilbert Hagedoorn

    Hilbert Hagedoorn Don Vito Corleone Staff Member

    Messages:
    48,388
    Likes Received:
    18,559
    GPU:
    AMD | NVIDIA
    The confusing part is simple, why do the SSDs die after 32,768 hours of operation. Of course, power on counts are normal, however, why does the SSD have a mechanism in play that allows the SSD to die after precisely that number of hours used?

    HP doesn't explain, the link you include doesn't either.
     
  7. Neo Cyrus

    Neo Cyrus Ancient Guru

    Messages:
    10,780
    Likes Received:
    1,393
    GPU:
    黃仁勳 stole my 4090
    Oops I accidentally programmed the firmware to kill the SSDs after 32,768 hours. Bug! Nothing to look at, conspiracy theorists. Intentional code is totally a bug.
     
  8. Reardan

    Reardan Master Guru

    Messages:
    632
    Likes Received:
    209
    GPU:
    GTX 3080
    Because this is the maximum of the positive value of a 16 bit integer. A 16 bit integer can hold 65,535 which is usually -32,768 to +32,768. Exactly the number of days before it dies.

    Your scare-mongering is irresponsible. What's more likely? HP has a kill-switch in their code that they've told everyone about, so now everyone knows that they're purposefully killing products to sell more...Or that they incorrectly used an int in the firmware? I just don't get the conspiracy BS. Like to believe in this I have to accept that HP has undermined trust in their storage solutions in order to sell a few thousand SSDs, maybe, once.
     
    Ridiric likes this.
  9. TheDeeGee

    TheDeeGee Ancient Guru

    Messages:
    9,633
    Likes Received:
    3,413
    GPU:
    NVIDIA RTX 4070 Ti
    Typical HP, just like messing with their printer cartridge firmware.
     
  10. Kaarme

    Kaarme Ancient Guru

    Messages:
    3,513
    Likes Received:
    2,355
    GPU:
    Nvidia 4070 FE
    Companies not getting caught: "Heh heh, everything's working perfectly: This means more sales as replacements!"
    HP: "It's a totally accidental bug in the firmware! Here's a fix. We are looking into how this happened (we will finish the investigation before the end of the century).
    AMD: "We have never heard of this problem before. We will be studying the issue... Wait, what were we talking about, again?"
    Intel: "We take these problems very seriously. In 2035 we will have a totally new product with a hardware fix. Please look forward to it!"
    Apple: "It's a feature. If you don't understand why it's there and its purpose, it's due to your lack of intelligence. Not our problem."
    Gigabyte, Asus, MSI, etc: "There are no problems. No problems. Please don't contact us again. Good bye."
     
    Neo Cyrus and wavetrex like this.

  11. Denial

    Denial Ancient Guru

    Messages:
    14,206
    Likes Received:
    4,118
    GPU:
    EVGA RTX 3080
    You typically don't replace drives in enterprise environments. Most enterprise SSDs are designed that as soon as they see any type of cell corruption/write/read issue they automatically fail the entire drive.
     
  12. Mesab67

    Mesab67 Guest

    Messages:
    244
    Likes Received:
    85
    GPU:
    GTX 1080
    It would be bizarre indeed (or p.poor programming) to have this operate over a constant alone. Irrespective, disassemble the current firmware and any subsequent 'patch' firmware. Focus on the differences. While it would (should?) be suicidal for a company if it were proven, don't be so naive to always assume something like this doesn't happen - we are dealing with companies seeking profit, or other.
     
    Last edited: Feb 24, 2020
  13. schmidtbag

    schmidtbag Ancient Guru

    Messages:
    7,973
    Likes Received:
    4,341
    GPU:
    HIS R9 290
    Good luck meddling with the drive firmware on a HP server. HP has a knack for whitelisting drives. I'm sure the server will reject a modified drive.

    Besides, depending how important and large expansive the mainframe is, the amount of downtime modifying each drive would be too costly.
     
  14. heffeque

    heffeque Ancient Guru

    Messages:
    4,422
    Likes Received:
    205
    GPU:
    nVidia MX150
    This.
     
  15. kroks

    kroks Active Member

    Messages:
    76
    Likes Received:
    12
    GPU:
    RTX 2070 SUPER
    When Planned obsolescence is too obvious...
    Now it's just a random number, after the warranty expires :)
     

  16. schmidtbag

    schmidtbag Ancient Guru

    Messages:
    7,973
    Likes Received:
    4,341
    GPU:
    HIS R9 290
    Not random - an integer value 32767 in binary is 111111111111111, so, once you go to 32768, that would bring the number to 1000000000000000, but they probably limited the amount of digits to the variable, so once you increment that value one more time, it resets to all zeros, at which point, the SSD is probably programmed to fail.

    But still.... it is planned obsolescence and that's what really matters.
     
  17. KissSh0t

    KissSh0t Ancient Guru

    Messages:
    13,832
    Likes Received:
    7,590
    GPU:
    ASUS 3060 OC 12GB
    Imagine making a ssd so good you actually have to artificially put a death date for it...... lol..
     
    HandR likes this.
  18. heffeque

    heffeque Ancient Guru

    Messages:
    4,422
    Likes Received:
    205
    GPU:
    nVidia MX150
    That's some interesting James Bond theory you've got there. Kek.:rolleyes:
     
  19. Margalus

    Margalus Master Guru

    Messages:
    388
    Likes Received:
    83
    GPU:
    MSI Ventus 3060 Ti
    Could be a nefarious plot to get new ssd's sold just like with their inkjet printers where the cartridges have expiration dates that cause the printers to stop working on those dates until new cartridges are purchased regardless of how much ink is in them. I love HP printers, but the expiration date thing is crap.
     
  20. Aura89

    Aura89 Ancient Guru

    Messages:
    8,413
    Likes Received:
    1,483
    GPU:
    -
    No, it doesn't, it sounds like a screw up, hence the firmware to fix it.

    No need to bring conspiracy theories in to any topic, ever. If you have evidence of a conspiracy, that is the only valid time.

    This is what people who bring up conspiracy theories sound like:

    [​IMG]


    If it was planned, then why fix it? Why fix it in advance? Why do anything about it? It's not like if they had planned it, they wouldn't have known that at some point people would get upset, so what is planned about it? Nothing. Calling this "Planned obsolescence" is simply throwing conspiracy into the wind.

    It's an issue that causes a product to brick itself that has been fixed and announced by the manufacturers so that way it doesn't happen, simple as that, to state anything else is nonsense, unneeded conspiracy theory.

    So either you're using the phrase "Planned Obsolescence" incorrectly, or you're throwing around conspiracy theories for no reason, which doesn't sound like most of what i've seen you write @schmidtbag

    Planned Obsolescence: a policy of producing consumer goods that rapidly become obsolete and so require replacing, achieved by frequent changes in design, termination of the supply of spare parts, and the use of nondurable materials.

    You must plan to make something obsolescent, to be accused of planned obsolescence. If there was no planning to do this, and no evidence of it, as well as no logical reasoning behind it, there can be no logical conspiracy behind claiming planned obsolescence.

    HP printers suck, not sure why you like them as they are overly expensive for their ink and in general are just not good quality. However, it's science that printer ink degrades, clogs up and ruins printers by trying to use them after so long. Denying this is denying facts.

    Seriously though being upset that the manufacturer is trying to ensure that its own products do not damage the main device in operation is just sad really. I can't say i don't wish there was a "Just use it anyway" option, but to expect that a LIQUID product will last forever and never change its composition and etc. is downright living with blinds over your eyes to reality.
     
    Last edited: Feb 25, 2020
    Ridiric likes this.

Share This Page