Hello All, I just finished building my new Rig. Just having one problem. cannot set the corsair h100i v2 to work. Mother board - asus z270f Cpu - Intel i7 7700k Cooler - corsair h100i v2 Here is the problem, at full load Cpu temp is 70 C (Stock Clock) but cooler's temp stays at about 27 C Overclock to 5 ghz, temp goes upto 90 C but fans stays at low rpm and so does the Cooler temp at 27. I have replaced the the thermal paste twice and have checked that the pump is working, checked all connections. everything is good only except the fans and coolant temp doesn't rise even with cpu at 90 C below is a screen shot of the problem. Please help me. https://imgur.com/VhMxdu9 EDIT - Forgot to add that at idle the temp never goes above 36 C (overclock) and 29 C (Stock Clock)
Try this, there's a problem with the H100i and Intel bracket not pulling the block up close enough to the CPU
Not sure if it applies to the v2 version of the h100i.. But will try it for sure. Thanks man... big help
Have you tried creating a custom fan profile and setting your cooler to read off cpu temps, I have the h110i gt and the default was reading the coolant temps which is completely different temperature. Also how old is your cooler, I had to replace the coolant in my H110i after just a few months due to scale build up in the block.
