ATI Catalyst 12.11 Beta 11 Modded driver For Legacy GPU

Discussion in 'Videocards - AMD Radeon Drivers Section' started by dellon132, Dec 27, 2012.

?

ATI Catalyst 12.11 B11 HotFix 11.01 Thoughts

  1. AMD HD 5000 and 6000 Users (GOOD)

    9.5%
  2. AMD Legacy GPU Users (HD 2000-4000) (GOOD)

    40.5%
  3. AMD Previous Legacy Mobility Users (Old GPU's) (GOOD)

    8.8%
  4. AMD Switchable Graphic Users (GOOD)

    6.8%
  5. AMD HD 5000-6000 Mobility Users (GOOD)

    8.1%
  6. AMD Legacy Mobility Users (HD 2000-4000) (GOOD)

    16.2%
  7. AMD HD 5000 and 6000 Users (BAD)

    0.7%
  8. AMD Legacy GPU Users (HD 2000-4000) (BAD)

    6.8%
  9. AMD Previous Legacy Mobility Users (Old GPU's) (BAD)

    4.1%
  10. AMD Switchable Graphic Users (BAD)

    6.1%
  11. AMD HD 5000-6000 Mobility Users (BAD)

    2.7%
  12. AMD Legacy Mobility Users (HD 2000-4000) (BAD)

    6.1%
Multiple votes are allowed.
  1. slobo2712

    slobo2712 Guest

    Messages:
    17
    Likes Received:
    0
    GPU:
    2600 xt
    Any indicatioon when that new veersion could be released?tnx
     
  2. popic

    popic Member

    Messages:
    12
    Likes Received:
    0
    GPU:
    Asus 3870X2 925/1010
  3. dellon132

    dellon132 Guest

    Messages:
    1,898
    Likes Received:
    0
    GPU:
    HD 5570 1 GB DDR3
    Can you perform a Test with 13.4 for me?
    I'm asking because the x64Bit OpenGL should be
    identical to 13.4 and 13.9.
    if you do decide to do it please follow the guide
    below.

    UPD Build Usage:
    Install Any Display Driver that works
    correctly for your System.
    -Run the Driver Cleaner then Choose
    the Upgrade Clean
    -Run AMD Setup then install the
    Upgradeable Driver Only.
    -Report your Findings.

    I would wait for the new build if your current driver is already working correctly, as the currently uploaded build still have a few bugs.

    Hmm, I see. I would like you to perform a Test for me. Can you install the
    UPD Build Only with a driver that works correctly for your System?

    UPD Build Usage:
    Install Any Display Driver that works
    correctly for your System.
    -Run the Driver Cleaner then Choose
    the Upgrade Clean
    -Run AMD Setup then install the
    Upgradeable Driver Only.
    -Report your Findings.

    You can find the notes on the front page for the next build. However
    a release date is undecided. (There are still things to implement)

    Thanks, the issue should be resolved in next build.
     
    Last edited: Dec 21, 2013
  4. epzads

    epzads Guest

    Messages:
    10
    Likes Received:
    0
    GPU:
    4870x2 512mb
    Hi Dellon,

    Hope you are fine and doing well,

    I really appreciate your hardwork for giving us drivers for legacy amd gpu
    I am currently using 12.11 driver with iamd version changer

    currently I am not able to use crossfire (4870x2) for need for speed rivals

    it is running and using only one gpu

    can you please help me ? and i dont have caps also for needs for speed rivals

    Thanks
     

  5. dellon132

    dellon132 Guest

    Messages:
    1,898
    Likes Received:
    0
    GPU:
    HD 5570 1 GB DDR3
    Sure, I will provide a preview release later today for Users to
    Test. Although I'm looking for feedback for all supported
    Graphic Cards, I would like x32Bit Users to provide detail feedback
    as the installation was broken for x32Bit Users in particular.


    NOTE:
    Legacy Users experiencing Directx Errors when attempting to play
    BattleField 4 should try Updating BF4 to UPDATE 2.

    UPDATE FOR ALL SUPPORTED OS 12/23/2013

    Installation Guide
    -Download and Extract
    -Run aSimple Cleanup Utility. (Perform a Normal AMD Cleanup)
    -Run aSimple Driver Cleanup.
    Select the Cleaner you would like to use.
    <->Cleaner For installing the Latest Upgradable Build
    <->Cleaner For installing the Latest AMD Display Driver.
    -Install the Display Driver or the Upgradable Build Through AMD Setup
    Note: Some Users may have to rely on the Signature Workaround to load the Display Driver into the System. Therefore
    Users may want to Use the Custom Installation method and make
    sure Signature Workaround and the Display Driver is Checked.
    -Installation Complete

    Notes:
    This Update will attempt to make the following changes:

    -Corrected a few installation bugs for x32Bit Users.
    In which Previous Legacy Users may experience an installation Failure
    when attempting to install the driver or possibly a Black Screen during
    the installation Process.
    -Updated Some driver related components
    -Added the latest Application Profile (NFS Rivals etc.)
    -Added installation Check to the Package Cleaner so Users can
    no what software or driver is currently installed on their system.
    -Updated the Package Cleaner Full Cleanup Option to resolve a
    bug in which some Software remained installed.
    --------------------------------------------------------------------------
    - Added Support for HD 3870 Users and other Users
    with different Graphic Cards.
    -Integrated iAMD Version Switcher to the newly Added
    AMD Optimizer. This Switcher will allow Users to Unlock
    or Enable/Disable Options that are unavailable in the
    Current Catalyst Control Center.
    Note:
    This Feature is not Fully Implemented in the PRE BUILD
    Enabling certain options will disable other options
    when making changes to the 3D Settings.
    -Added a New Switcher to the AMD Settings
    Optimizer. This Switcher is for Previous Legacy Users
    encountering Problems when attempting to Change
    Video Settings or Image Scaling Settings in Catalyst
    Control Center.
    --------------------------------------------------------------------------
    -Officially Added Support for Previous Legacy Mobility Graphic Cards.
    -Attempts to Resolve a Bug causing Previous Legacy Graphics to exhibit
    bugs in which the Following Catalyst Control Center Options does not work:
    <->The Picture in the Video tab appears to be missing
    <->Selection an on the Video tab does not apply
    -Attempts to resolve a bug in which owners of Previous Legacy Graphic Cards
    may lose Aero Support in Windows 7 and Vista.
    -Attempts to resolve a bug in which Previous Legacy Owners may experience
    lost of Video Playback through Windows Media Player and other Media Players
    --------------------------------------------------------------------------
    -Added an Alternate Installer to assist Users in installing Drivers
    and Software when both AMDSetup and Device Manager Fails.
    The Newly added Installer is capable of installing and Checking to
    see if a Driver or Software is installed.
    -Resolved a bug resulting in a Black Screen when
    aSimple Driver Cleanup is Used.
    -Resolved a bug in which aSimple CleanUP Full Clean was missing
    one of it's cleaning process.
    -Resolved a bug in which Catalyst Install Manager would not
    re-install Visual C++ 2010
    -Updated Dxva Settings as an attempt to resolve a bug
    in which results in slow videos.


    Note:
    -Users can use the iAMD Version Changer to change there Catalyst version
    from 12.11 to AMD Catalyst 13.11.
    -Switchable Graphics Users should provide a detail feedback stating how the latest driver functions on their setup.

    Pending Changes
    -Adding a Low Powered Switcher for Mobility HD 4000 Users and Below.
    -Adding a Switcher Capable of allowing Users to revert to a Previously
    Working\Stable Build. (For HD 2000 Series - HD 4000 Series)

    Download Link:
    ATI Catalyst 12.11 B11 HotFix 10 P6 V11.10.6.8.5 Un-Official Build (PRE)
     
    Last edited: Dec 23, 2013
  6. slobo2712

    slobo2712 Guest

    Messages:
    17
    Likes Received:
    0
    GPU:
    2600 xt
    with that latest version Signature workaround,Upgradeable build,Catalyst Control Center are not installed,and every swicher i try to apply just showing errors in cmd window....
    windows 8.1 32bit enterprise
     
  7. dellon132

    dellon132 Guest

    Messages:
    1,898
    Likes Received:
    0
    GPU:
    HD 5570 1 GB DDR3
    -Use the Installation Failure Workaround.
    -Make sure to run all Switchers that are
    not a Shortcut as an Administrator.
    -If Catalyst Installation Fails, Try installing drivers
    and Software through the Alternate Installer.
     
  8. Lizzo

    Lizzo Guest

    Messages:
    3
    Likes Received:
    0
    GPU:
    4870
    oookay great driver but i have a serious issue. when i used aSimple driver from the latest build u posted, my computer is now telling me i have no programs installed in control panel.
     
  9. dellon132

    dellon132 Guest

    Messages:
    1,898
    Likes Received:
    0
    GPU:
    HD 5570 1 GB DDR3
    Hmm, is that aSimple Driver or aSimple Cleanup Utility?
     
  10. Lizzo

    Lizzo Guest

    Messages:
    3
    Likes Received:
    0
    GPU:
    4870
    it's aSimple driver :'( it happened after i selected "[f] = Fresh Installation (for installing New Display Drivers)"

    i am on windows 8.1 (in case it matters)
     

  11. slobo2712

    slobo2712 Guest

    Messages:
    17
    Likes Received:
    0
    GPU:
    2600 xt
    tried all what you said exept to run swichers that are not shortcuts because i couldn't find them....this what i got

    [​IMG]

    AMD vision engine controc center is installed but here says it's not,and this first two i don't know what they are?
    [​IMG]
     
  12. dellon132

    dellon132 Guest

    Messages:
    1,898
    Likes Received:
    0
    GPU:
    HD 5570 1 GB DDR3
    Thanks, I will provide another build soon.
     
  13. heatseeker

    heatseeker Guest

    Messages:
    36
    Likes Received:
    0
    GPU:
    Sapphire 280x
    I have the same issue...
     
  14. dellon132

    dellon132 Guest

    Messages:
    1,898
    Likes Received:
    0
    GPU:
    HD 5570 1 GB DDR3
    Hmm, with the driver Cleaner? or Package Cleaner?
    That Option was included in the Package Cleaner.
    When users Enter the Letter F the cleaner will Perform
    a Full Uninstall.
     
  15. geowizard

    geowizard Guest

    Messages:
    42
    Likes Received:
    0
    GPU:
    GigaByte HD4890 1GB
    They work perfectly, thanks!
     

  16. dellon132

    dellon132 Guest

    Messages:
    1,898
    Likes Received:
    0
    GPU:
    HD 5570 1 GB DDR3
    That's great, here is the Next Build.

    UPDATE FOR ALL SUPPORTED OS 12/23/2013

    Installation Guide
    -Download and Extract
    -Run aSimple Cleanup Utility. (Perform a Normal AMD Cleanup)
    -Run aSimple Driver Cleanup.
    Select the Cleaner you would like to use.
    <->Cleaner For installing the Latest Upgradable Build
    <->Cleaner For installing the Latest AMD Display Driver.
    -Install the Display Driver or the Upgradable Build Through AMD Setup
    Note: Some Users may have to rely on the Signature Workaround to load the Display Driver into the System. Therefore
    Users may want to Use the Custom Installation method and make
    sure Signature Workaround and the Display Driver is Checked.
    -Installation Complete

    Notes:
    PRE-2 will now attempt to make the following changes:

    -Attempts to resolve a bug in which the Alternate Installer
    shows Catalyst Control Center as not installed for x32Bit Users.
    -Resolves a bug in which Previous Legacy Mobility Users may
    experience an Application Crash when using OpenGL Applications
    -Resolves a bug causing the Performance Switchers to not
    work for x32Bit Users.
    -Updated the Package Cleaner to change the message displayed
    so users have a better understanding of what the Full Cleanup
    does.
    --------------------------------------------------------------------------
    -Corrected a few installation bugs for x32Bit Users.
    In which Previous Legacy Users may experience an installation Failure
    when attempting to install the driver or possibly a Black Screen during
    the installation Process.
    -Updated Some driver related components
    -Added the latest Application Profile (NFS Rivals etc.)
    -Added installation Check to the Package Cleaner so Users can
    no what software or driver is currently installed on their system.
    -Updated the Package Cleaner Full Cleanup Option to resolve a
    bug in which some Software remained installed.
    --------------------------------------------------------------------------
    - Added Support for HD 3870 Users and other Users
    with different Graphic Cards.
    -Integrated iAMD Version Switcher to the newly Added
    AMD Optimizer. This Switcher will allow Users to Unlock
    or Enable/Disable Options that are unavailable in the
    Current Catalyst Control Center.
    Note:
    This Feature is not Fully Implemented in the PRE BUILD
    Enabling certain options will disable other options
    when making changes to the 3D Settings.
    -Added a New Switcher to the AMD Settings
    Optimizer. This Switcher is for Previous Legacy Users
    encountering Problems when attempting to Change
    Video Settings or Image Scaling Settings in Catalyst
    Control Center.
    --------------------------------------------------------------------------
    -Officially Added Support for Previous Legacy Mobility Graphic Cards.
    -Attempts to Resolve a Bug causing Previous Legacy Graphics to exhibit
    bugs in which the Following Catalyst Control Center Options does not work:
    <->The Picture in the Video tab appears to be missing
    <->Selection an on the Video tab does not apply
    -Attempts to resolve a bug in which owners of Previous Legacy Graphic Cards
    may lose Aero Support in Windows 7 and Vista.
    -Attempts to resolve a bug in which Previous Legacy Owners may experience
    lost of Video Playback through Windows Media Player and other Media Players
    --------------------------------------------------------------------------
    -Added an Alternate Installer to assist Users in installing Drivers
    and Software when both AMDSetup and Device Manager Fails.
    The Newly added Installer is capable of installing and Checking to
    see if a Driver or Software is installed.
    -Resolved a bug resulting in a Black Screen when
    aSimple Driver Cleanup is Used.
    -Resolved a bug in which aSimple CleanUP Full Clean was missing
    one of it's cleaning process.
    -Resolved a bug in which Catalyst Install Manager would not
    re-install Visual C++ 2010
    -Updated Dxva Settings as an attempt to resolve a bug
    in which results in slow videos.

    Note:
    -Users can use the iAMD Version Changer to change there Catalyst version
    from 12.11 to AMD Catalyst 13.11.
    -Switchable Graphics Users should provide a detail feedback stating how the latest driver functions on their setup.

    Pending Changes
    -Adding a Low Powered Switcher for Mobility HD 4000 Users and Below.
    -Adding a Switcher Capable of allowing Users to revert to a Previously
    Working\Stable Build. (For HD 2000 Series - HD 4000 Series)

    Download Link:
    ATI Catalyst 12.11 B11 HotFix 10 P6 V11.10.6.8.5 Un-Official Build (PRE 2)
     
  17. slobo2712

    slobo2712 Guest

    Messages:
    17
    Likes Received:
    0
    GPU:
    2600 xt
    first thank you for your hard work

    now it look like this

    [​IMG]
    [​IMG]

    also flash player hardware acceleration only works good with xFlash GPU Acceleration script from V11.10.6.7.7.6 drivers
     
  18. Lizzo

    Lizzo Guest

    Messages:
    3
    Likes Received:
    0
    GPU:
    4870
    a full uninstall of what exactly? cuz it seemed like it removed a bit more than it should lol
     
  19. dellon132

    dellon132 Guest

    Messages:
    1,898
    Likes Received:
    0
    GPU:
    HD 5570 1 GB DDR3
    Ok I'll take a look at at the Flash Hardware
    Acceleration and also the Control Center bug.
    Thanks for providing your results.

    Yea, that cleaner does cleaning on a Global scale. So it removes everything
    (All Software) It's capable of resolving installations that have become
    Corrupted. Thus allowing Users to Re-install Software without having
    To Format or re-install their OS
     
    Last edited: Dec 23, 2013
  20. heatseeker

    heatseeker Guest

    Messages:
    36
    Likes Received:
    0
    GPU:
    Sapphire 280x
    With aSimpleDriverCleaner "Full Uninstall" option. I was testing 12.11 B11 HotFix 10 P6 V11.10.6.8.3 when occurs. It's the same issue that Lizzo says.
     

Share This Page