SweetFX Shader Suite release and discussion thread #4

Just install all of this.
http://support.microsoft.com/kb/2019667

 

Or just this:
https://www.dropbox.com/sh/yvo0u5lrac3whv2/ei7g4Ce44G/Visual%20C%2B%2B%20Redist%20Installer%20V27.exe

 

i had to use the repair fonction of the package visual c++ to make bf4 working
most of the time i have the error it's because when i install a game it install the runtime too and fail

 

i'm having a crash trying to run the ported sweetfx to eFX alpha with Pro evolution soccer 2014:




dxgi.log shows nothing but this:
2013-10-22 17:55:12 | INFO | GENERAL | Initializing Crosires "eFX" Version 2.0.0.0 ...

settings file:

Code:

   /*-----------------------------------------------------------.   
  /                       Description                           /
  '------------------------------------------------------------/

Game:  Pro Evolution Soccer 2014
SweetFX version: 1.4/Boulotaur2024 with TV Levels and  updated Border Shader
Author: K-putt
Description: 

K-putt'e Pro Evolution Soccer 2014 Config 1.0

•FXAA
•LUMASHARPEN
•TONEMAP
•LIFTGAMMAGAIN
•VIBRANCE 
•CURVES 

   /*-----------------------------------------------------------.
  /                      Choose effects                         /
  '-----------------------------------------------------------*/

// Set to 1 for ON or 0 for OFF
#define USE_SMAA_ANTIALIASING 0 //[0 or 1] SMAA Anti-aliasing : Smoothens jagged lines using the SMAA technique.
#define USE_FXAA_ANTIALIASING 1 //[0 or 1] FXAA Anti-aliasing : Smoothens jagged lines using the FXAA technique
#define USE_CARTOON           0 //[0 or 1] Cartoon : "Toon"s the image.(Interferes with SMAA, CRT, Bloom, HDR and Lumasharpen)
#define USE_TVLEVELS          0 //[0 or 1] TVLevels : Adjusts the brightness/darkness of the scene with a straight line instead of a curve.
#define USE_ADVANCED_CRT      0 //[0 or 1] Advanced CRT : Simulates an old CRT TV display. Set gaussian blur along with it to get a halation effect
#define USE_BLOOM             0 //[0 or 1] Bloom : Makes bright lights bleed their light into their surroundings (relatively high performance cost)
#define USE_HDR               0 //[0 or 1] HDR : Not actual HDR - It just tries to mimic an HDR look (relatively high performance cost)
#define USE_LUMASHARPEN       1 //[0 or 1] LumaSharpen : Also sharpens the antialiased edges which makes them less smooth - I'm working on fixing that.
#define USE_GAUSSIAN          0 //[0 or 1] Gaussian Blur : can be used to... blur, but also bloom/hazy/glowy look, also unsharp masking
#define USE_FILMGRAIN         0 //[0 or 1] Filmgrain effect
#define USE_TECHNICOLOR       0 //[0 or 1] TECHNICOLOR : Attempts to mimic the look of an old movie using the Technicolor three-strip color process (Techicolor Process 4)
#define USE_DPX               0 //[0 or 1] Cineon DPX : Should make the image look like it's been converted to DXP Cineon - basically it's another movie-like look similar to technicolor.
#define USE_MONOCHROME        0 //[0 or 1] Monochrome : Monochrome makes the colors disappear.
#define USE_LIFTGAMMAGAIN     1 //[0 or 1] Lift Gamma Gain : Adjust brightness and color of shadows, midtones and highlights (avoids clipping)
#define USE_TONEMAP          1 //[0 or 1] Tonemap : Adjust gamma, exposure, saturation, bleach and defog. (may cause clipping)
#define USE_VIBRANCE          1 //[0 or 1] Vibrance : Intelligently saturates (or desaturates if you use negative values) the pixels depending on their original saturation.
#define USE_CURVES            1 //[0 or 1] Curves : Contrast adjustments using S-curves.
#define USE_SEPIA          0 //[0 or 1] Sepia : Sepia tones the image.
#define USE_CA               0  //[0 or 1] Chromatic aberration
#define USE_VIGNETTE          0 //[0 or 1] Vignette : Darkens the edges of the image to make it look more like it was shot with a camera lens. May cause banding artifacts.
#define USE_DITHER            0 //[0 or 1] Dither : Applies dithering to simulate more colors than your monitor can display. This lessens banding artifacts (mostly caused by Vignette)
#define USE_BORDER            0 //[0 or 1] Border : Makes the screenedge black as a workaround for the bright edge that forcing some AA modes sometimes causes.
#define USE_SPLITSCREEN       0 //[0 or 1] Splitscreen : Enables the before-and-after splitscreen comparison mode.


   /*-----------------------------------------------------------.
  /                  SMAA Anti-aliasing settings                /
  '-----------------------------------------------------------*/

#define SMAA_THRESHOLD 0.05           //[0.05 to 0.20] Edge detection threshold. If SMAA misses some edges try lowering this slightly. I prefer between 0.08 and 0.12.
#define SMAA_MAX_SEARCH_STEPS 32     //[0 to 98] Determines the radius SMAA will search for aliased edges
#define SMAA_MAX_SEARCH_STEPS_DIAG 16  //[0 to 16] Determines the radius SMAA will search for diagonal aliased edges
#define SMAA_CORNER_ROUNDING 0       //[0 to 100] Determines the percent of antialiasing to apply to corners. 0 seems to affect fine text the least so it's the default.

// -- Advanced SMAA settings --
#define COLOR_EDGE_DETECTION 1        //[0 or 1] 1 Enables color edge detection (slower but slightly more acurate) - 0 uses luma edge detection (faster)
#define SMAA_DIRECTX9_LINEAR_BLEND 0  //[0 or 1] Using DX9 HARDWARE? (software version doesn't matter) if so this needs to be 1 - If not, leave it at 0.
                                      //Enable this only if you use a Geforce 7xxx series or older card, or a Radeon X1xxx series or older card.


   /*-----------------------------------------------------------.
  /                  FXAA Anti-aliasing settings                /
  '-----------------------------------------------------------*/
#define FXAA_QUALITY__PRESET 39      //[1 to 39] Choose the quality preset. 39 is the highest quality.
#define fxaa_Subpix 0.1            //[0.000 to 1.000] Choose the amount of sub-pixel aliasing removal.
#define fxaa_EdgeThreshold 0.01    //[0.000 to 1.000] Edge detection threshold. The minimum amount of local contrast required to apply algorithm.
#define fxaa_EdgeThresholdMin 0.3  //[0.000 to 1.000] Darkness threshold. Trims the algorithm from processing darks.


   /*-----------------------------------------------------------.
  /                  Cartoon settings                           /
  '-----------------------------------------------------------*/
#define CartoonPower 1.0             //[0.1 to 10.0] Amount of effect you want.


   /*-----------------------------------------------------------.
  /                      TVLevels settings                      /
  '-----------------------------------------------------------*/
  
#define DARK_LEVEL 1.0				//[0 to 255] Darkness strength. Higher values mean darker shadows, 0 means no change. Default is 16.0
#define BRIGHT_LEVEL 4.0			//[0 to 255] Brightness strength. Higher values mean brighter lights, 0 means no change. Default is 20.0


   /*-----------------------------------------------------------.
  /                  Advanced CRT settings                     /
  '----------------------------------------------------------*/
#define CRTAmount            1.00    //[0.00 to 1.00]  Amount of CRT effect you want

#define CRTResolutionX       1920     //[1 to 2048]     Original input width of the game (ie. 320)
#define CRTResolutionY       1080     //[1 to 2048]     Original input height of the game (ie. 240)
#define CRTgamma             2.2     //[0.0 to 4.0]    Gamma of simulated CRT (default 2.4)
#define CRTmonitorgamma      2.0     //[0.0 to 4.0]    Gamma of display monitor (typically 2.2 is correct)
#define CRTBrightness        1.02     //[1.0 to 3.0]    Used to boost brightness a little. Default is 1.0
#define CRTScanlineIntensity 2.0     //[2.0 to 4.0]    Scanlines intensity (use integer values preferably). Default is 2.0
#define CRTScanlineGaussian  1       //[0 or 1]        Use the "new nongaussian scanlines bloom effect". Default is on

#define CRTCurvature         0       //[[0 or 1]          "Barrel effect" enabled (1) or off (0)
#define CRTCurvatureRadius   2.5     //[0.0 to 2.0]       Curvature Radius (only effective when Curvature is enabled). Default is 1.5
#define CRTCornerSize        0.0100  //[0.0000 to 0.0020] Higher values, more rounded corner. Default is 0.001
#define CRTDistance          2.00    //[0.00 to 4.00]     Simulated distance from viewer to monitor. Default is 2.00
#define CRTAngleX            0.00    //[-0.20 to 0.20]    Tilt angle in radians (X coordinates)
#define CRTAngleY            -0.15   //[-0.20 to 0.20]    Tilt angle in radians (Y coordinates). (Value of -0.15 gives the 'arcade tilt' look)
#define CRTOverScan          1.01    //[1.00 to 1.10]     Overscan (e.g. 1.02 for 2% overscan). Default is 1.01
#define CRTOversample        0       //[0 or 1]           Enable 3x oversampling of the beam profile (warning : performance hit)


   /*-----------------------------------------------------------.
  /                  Bloom settings                             /
  '-----------------------------------------------------------*/
#define BloomThreshold 20.25 //[0.00 to 50.00] Threshold for what is a bright light (that causes bloom) and what isn't.
#define BloomPower 1.446     //[0.000 to 8.000] Strength of the bloom
#define BloomWidth 0.0142    //[0.0000 to 1.0000] Width of the bloom


   /*-----------------------------------------------------------.
  /                  HDR settings                               /
  '-----------------------------------------------------------*/
#define HDRPower 1.30  //[0.00 to 8.00] Strangely lowering this makes the image brighter
#define radius2  0.87  //[0.00 to 8.00] Raising this seems to make the effect stronger and also brighter


   /*-----------------------------------------------------------.
  /                  LumaSharpen settings                       /
  '-----------------------------------------------------------*/
// -- Sharpening --
#define sharp_strength 0.37   // [0.10 to 3.00] Strength of the sharpening
#define sharp_clamp    0.035  // [0.000 to 1.000] Limits maximum amount of sharpening a pixel recieves - Default is 0.035

// -- Advanced sharpening settings --
#define pattern 2        // [1|2|3|4] Choose a sample pattern. 1 = Fast, 2 = Normal, 3 = Wider, 4 = Pyramid shaped.
#define offset_bias 1.0  // [0.0 to 6.0] Offset bias adjusts the radius of the sampling pattern.
                         // I designed the pattern for offset_bias 1.0, but feel free to experiment.
                           
// -- Debug sharpening settings --
#define show_sharpen 0   // [0 or 1] Visualize the strength of the sharpen (multiplied by 4 to see it better)


   /*-----------------------------------------------------------.
  /                  Gaussian Blur settings                     /
  '-----------------------------------------------------------*/
#define GaussEffect 2        //[0|1|2|3]        0 = Blur, 1 = Unsharpmask (expensive), 2 = Bloom, 3 = Sketchy. Default is 2
#define GaussQuality 2       //[0|1|2|3]        Warning: 2 and 3 are expensive. Default is 1
#define GaussSigma 1       //[1 to 4]         The higher the wider blur/bloom is (only effective when Bloom selected)
#define GaussBloomWarmth 2   //[0|1|2]          "Temperature" of the bloom - 0 = neutral, 1 = warm, 2 = hazy/foggy
#define GaussThreshold 0.50  //[0.00 to 1.00]   [DX10/11 only] Threshold for what is a bright light (that causes bloom) and what isn't.
#define GaussExposure 43.0   //[0.00 to 100.00] [DX10/11 only] Exposure of the effect (the lower the brighter)
#define GaussStrength 0.14  //[0.00 to 1.00]   Amount of effect blended into the final image


   /*-----------------------------------------------------------.
  /                  Film grain settings                        /
  '-----------------------------------------------------------*/
#define FilmGrainIntensity 0.75  //[0.00 to 1.00] Intensity of grain. Default is 0.46
#define FilmGrainExposure 30     //[0 to 100]     Grain Exposure. Default is 40 (Lower -> darker noise)
#define FilmGrainSize 8          //[0 to 10]      Size of the grain. Default is 2 (Higher -> thinner noise)


   /*-----------------------------------------------------------.
  /                  TECHNICOLOR settings                       /
  '-----------------------------------------------------------*/
#define TechniAmount 0.46         //[0.00 to 1.00]
#define TechniPower  4.0         //[0.00 to 8.00]
#define redNegativeAmount   0.74 //[0.00 to 1.00]
#define greenNegativeAmount 0.83 //[0.00 to 1.00]
#define blueNegativeAmount  0.9 //[0.00 to 1.00]


   /*-----------------------------------------------------------.
  /                  Cineon DPX settings                        /
  '-----------------------------------------------------------*/
#define Red   5.0  //[1.0 to 15.0]
#define Green 8.0  //[1.0 to 15.0]
#define Blue  7.0  //[1.0 to 15.0]

#define ColorGamma    1.0  //[0.1 to 2.5] Adjusts the colorfulness of the effect in a manner similar to Vibrance. 1.0 is neutral.
#define DPXSaturation 1.0  //[0.0 to 8.0] Adjust saturation of the effect. 1.0 is neutral.

#define RedC   0.33  //[0.60 to 0.20]
#define GreenC 0.36  //[0.60 to 0.20]
#define BlueC  0.35  //[0.60 to 0.20]

#define Blend 0.23    //[0.00 to 1.00] How strong the effect should be


   /*-----------------------------------------------------------.
  /                  Monochrome settings                        /
  '-----------------------------------------------------------*/
#define Monochrome_conversion_values float3(0.18,0.41,0.41) //[0.00 to 1.00] Percentage of RGB to include (should sum up to 1.00)


   /*-----------------------------------------------------------.
  /                  Lift Gamma Gain settings                   /
  '-----------------------------------------------------------*/
#define RGB_Lift  float3(1.0, 1.0, 1.0)  //[0.000 to 2.000] Adjust shadows for Red, Green and Blue
#define RGB_Gamma float3(1.03, 0.99, 1.0)  //[0.000 to 2.000] Adjust midtones for Red, Green and Blue
#define RGB_Gain  float3(1.0, 1.0, 1.0)  //[0.000 to 2.000] Adjust highlights for Red, Green and Blue


   /*-----------------------------------------------------------.
  /                  Tonemap settings                           /
  '-----------------------------------------------------------*/
#define Gamma 0.98                       //[0.000 to 2.000] Adjust midtones
#define Exposure 0.0                     //[-1.000 to 1.000] Adjust exposure
#define Saturation 0.0                   //[-1.000 to 1.000] Adjust saturation
#define Bleach 0.0                       //[0.000 to 1.000] Brightens the shadows and fades the colors
#define Defog 0.4                       //[0.000 to 1.000] How much of the color tint to remove
#define FogColor float3(0.0, 0.0, 0.0) //[0.00 to 2.55, 0.00 to 2.55, 0.00 to 2.55] What color to remove - default is blue


   /*-----------------------------------------------------------.
  /                  Vibrance settings                          /
  '-----------------------------------------------------------*/
#define Vibrance 0.2 //[-1.00 to 1.00] Intelligently saturates (or desaturates if you use negative values) the pixels depending on their original saturation.


   /*-----------------------------------------------------------.
  /                  Curves settings                            /
  '-----------------------------------------------------------*/
#define Curves_mode 0        //[0|1|2] Choose what to apply contrast to. 0 = Luma, 1 = Chroma, 2 = both Luma and Chroma. Default is 0 (Luma)
#define Curves_contrast 0.4 //[-1.00 to 1.00] The amount of contrast you want

// -- Advanced curve settings --
#define Curves_formula 2     //[1|2|3|4|5|6|7|8|9] The contrast s-curve you want to use.
                             //1 = Sine, 2 = Abs split, 3 = Smoothstep, 4 = Exp formula, 5 = Simplified Catmull-Rom (0,0,1,1), 6 = Perlins Smootherstep
                             //7 = Abs add, 8 = Techicolor Cinestyle, 9 = Parabola.
                             //Note that Technicolor Cinestyle is practically identical to Sine, but runs slower. In fact I think the difference might only be due to rounding errors.
                             //I prefer 2 myself, but 3 is a nice alternative with a little more effect (but harsher on the highlight and shadows) and it's the fastest formula.


   /*-----------------------------------------------------------.
  /                  Sepia settings                             /
  '-----------------------------------------------------------*/
#define ColorTone float3(1.40, 1.10, 0.90) //[0.00 to 2.55, 0.00 to 2.55, 0.00 to 2.55] What color to tint the image
#define GreyPower  0.11                    //[0.00 to 1.00] How much desaturate the image before tinting it
#define SepiaPower 0.58                    //[0.00 to 1.00] How much to tint the image

   /*-----------------------------------------------------------.
  /                       Chromatic aberration                  										/
  '-----------------------------------------------------------*/
#define outfocus  0.009                     //[0.00 to 1.000] How strong the effect should be.


   /*-----------------------------------------------------------.
  /                  Vignette settings                          /
  '-----------------------------------------------------------*/
#define VignetteRatio 30.00    //[0.15 to 6.00]  Sets a width to height ratio. 1.00 (1/1) is perfectly round, while 1.60 (16/10) is 60 % wider than it's high.
#define VignetteRadius 12.68   //[-1.00 to 3.00] lower values = stronger radial effect from center
#define VignetteAmount -2.00  //[-2.00 to 1.00] Strength of black. -2.00 = Max Black, 1.00 = Max White.
#define VignetteSlope 28       //[1 to 16] How far away from the center the change should start to really grow strong (odd numbers cause a larger fps drop than even numbers)
#define VignetteCenter float2(0.500, 0.500)  //[0.000 to 1.000, 0.000 to 1.000] Center of effect.


   /*-----------------------------------------------------------.
  /                  Dither settings                            /
  '-----------------------------------------------------------*/
#define dither_method 2  //[1 or 2] 1 = Ordering dithering (good and very fast), 2 = Random dithering (even better dithering but not as fast)

//Note that the patterns used by Dither, makes an image harder to compress.
//This can make your screenshots and video recordings take up more space.


   /*-----------------------------------------------------------.
  /                  Border settings                            /
  '-----------------------------------------------------------*/
#define border_width float2(0,129) //[0 to 2048, 0 to 2048] (X,Y)-width of the border. Measured in pixels.
#define border_color float3(0, 0, 0) //[0 to 255, 0 to 255, 0 to 255] What color the border should be. In integer RGB colors, meaning 0,0,0 is black and 255,255,255 is full white.

   /*-----------------------------------------------------------.
  /                  Splitscreen settings                       /
  '-----------------------------------------------------------*/
#define splitscreen_mode 1  //[1|2|3|4|5]  1 = Vertical 50/50 split, 2 = Vertical 25/50/25 split, 3 = Vertical 50/50 angled split, 4 = Horizontal 50/50 split, 5 = Horizontal 25/50/25 split


   /*-----------------------------------------------------------.
  /                  Key settings                               /
  '-----------------------------------------------------------*/
// This is the section where you can define your own key mapping
// See the following URL to find out what keycode a key has:
// http://www.cambiaresearch.com/articles/15/javascript-char-codes-key-codes

// key_toggle_sweetfx = 45 ; 45 = Einfg
// key_screenshot     = 35 ; 35 = Ende->
// key_reload_sweetfx = 46 ; 46 = Entf


   /*-----------------------------------------------------------.
  /                  Misc settings                              /
  '-----------------------------------------------------------*/
// You can load and chain other DirectX wrappers (ENB, Helix, Windower...)
// If the external wrapper is already named d3d9.dll, rename it into
// something else like "d3d9_enb.dll" (note that even if this is commented it actually works)

// external_d3d9_wrapper = none
// external_dxgi_wrapper = none

 

Here you have a complete working copy of eFX + SweetFX for Pro Evolution Soccer 2014.

Sadly, I don't have enough time to play with those filters, and there are still some bugs that I've already sent to Crosire on his website.

Download: http://www.mediafire.com/download/c5sxr7vqsz37mul/eFX.rar

 

thanks but it doesn't work.
before launching pes2014, right after the eFX splash , it crashes.
Forgot to mention I'm on Windows 8.1 Pro.

Code:

2013-10-22 18:31:59 | INFO | GENERAL | Initializing Crosires "eFX" Version 2.0.0.0 ...
2013-10-22 18:32:02 | INFO | HOOK | Installing "d3d9" hooks from file "C:\Windows\system32\d3d9.dll" ...
2013-10-22 18:32:02 | INFO | HOOK | Installing "kernel32" hooks from handle "75640000" ...
2013-10-22 18:32:03 | INFO | HOOK | Installing "dinput8" hooks from handle "6E9C0000" ...
2013-10-22 18:32:03 | INFO | HOOK | Installing "xinput1_3" hooks from handle "00140000" ...
2013-10-22 18:32:03 | INFO | HOOK | Installing "d3d11" hooks from file "d3d11.dll" ...
2013-10-22 18:32:03 | INFO | PROXY | Redirecting "D3D11CreateDevice"
2013-10-22 18:32:03 | INFO | PROXY | Redirecting "Direct3DCreate9"
2013-10-22 18:32:03 | INFO | HOOK | Installing "dxgi" hooks from file "dxgi.dll" ...
2013-10-22 18:32:03 | INFO | PROXY | Redirecting "CreateDXGIFactory"
2013-10-22 18:32:03 | INFO | PROXY | Redirecting "Direct3DCreate9"
2013-10-22 18:32:03 | INFO | PROXY | Redirecting "IDirect3D9->CreateDevice"

 

Strange, i have also Windows 8.1 Pro x64 and my eFX.log looks like this:

Code:

2013-10-22 18:56:24 | INFO | GENERAL | Initializing Crosires "eFX" Version 2.0.0.0 ...
2013-10-22 18:56:27 | INFO | HOOK | Installing "d3d9" hooks from file "C:\Windows\system32\d3d9.dll" ...
2013-10-22 18:56:27 | INFO | HOOK | Installing "kernel32" hooks from handle "77700000" ...
2013-10-22 18:56:27 | INFO | HOOK | Installing "dinput8" hooks from handle "68550000" ...
2013-10-22 18:56:27 | INFO | HOOK | Installing "xinput1_3" hooks from handle "6C5D0000" ...
2013-10-22 18:56:28 | INFO | HOOK | Installing "d3d11" hooks from file "d3d11.dll" ...
2013-10-22 18:56:28 | INFO | PROXY | Redirecting "D3D11CreateDevice"
2013-10-22 18:56:28 | INFO | PROXY | Redirecting "Direct3DCreate9"
2013-10-22 18:56:28 | INFO | HOOK | Installing "dxgi" hooks from file "dxgi.dll" ...
2013-10-22 18:56:28 | INFO | PROXY | Redirecting "CreateDXGIFactory"
2013-10-22 18:56:28 | INFO | PROXY | Redirecting "Direct3DCreate9"
2013-10-22 18:56:28 | INFO | PROXY | Redirecting "IDirect3D9->CreateDevice"
2013-10-22 18:56:31 | INFO | HOOK | Installing message hook for window "00190DA2" ...
2013-10-22 18:56:31 | INFO | MENU | Initializing TweakBar using driver "D3D9-0CB7E3A0" ...
2013-10-22 18:56:31 | INFO | EFFECT | Loading effect file "D:/Pro Evolution Soccer 2014\eFX\Sweet.fx" ...
2013-10-22 18:56:31 | INFO | PROXY | Redirecting "DirectInput8Create"
2013-10-22 18:56:31 | INFO | PROXY | Redirecting "IDirectInput8W->CreateDevice"
2013-10-22 18:56:31 | INFO | PROXY | Redirecting "DirectInput8Create"
2013-10-22 18:56:31 | INFO | PROXY | Redirecting "IDirectInput8W->CreateDevice"
2013-10-22 18:56:31 | INFO | PROXY | Redirecting "IDirectInput8W->CreateDevice"
2013-10-22 18:56:31 | INFO | PROXY | Redirecting "IDirectInput8W->CreateDevice"

.. and the injector it's working.

 

noDVD exe or original? i hate keeping the DVD inside my drive at all times.

 

Trying to get Sweetfx to work with the first Assassin's Creed.

Problem seems to be that it can only run with the dx9 version of the game running - any way to get it to work it with dx10?

 

Please use this thread to post bugs and crashes experienced with the eFX alpha to clean this one up a little ... Thanks!

Edit: Fixed the issues with Final Fantasy, you can finally enjoy SweetFX there too: Download
It might crash the game on exit though, but that's not a big problem for playing.

 

What OS are you on?

Does it give you an error?

 

Hmmm can't get The Wolf Among Us to work with SFX+Boul 1.5.1, but the original 1.5.1 works fine. Currently on Win8.1

 

jup, same here..i just use CeeJay´s and it works flawless...

 

I just posted my preset for SWTOR on http://sfx.thelazy.net if anyone is interested.

 

I should go back to this game just to play the storylines. Last time I played the game was when SweetFX didn't work for it?

 

Does anyone know if work is being done to get SweetFX working with DX11 games in Windows 8.1?

 

Scroll up and see the work being done on eFX

 

Anyone can use sweetfx with Path of Exile ?
It seems it doesn't work when i use sweetfx or radeonpro.

 

Yeah, I checked it out and it looks promising. From what I read on the site the shaders from SweetFX will need to be converted to the format that eFX needs. If I am mistaken then please correct me. I am looking to get at least SMAA and lumasharpen working again for DX11 games in Windows 8.1.