AMD Catalyst 12.3 RC (8.950.0 February 14) AMD Official BETA

Im idling now with the 2nd monitor disabled, but when i enable it the clocks go to 1000 mhz even when the 2nd monitor is not even displaying the computer.

 

try reversing it, turn on the 2nd monitor, and disable the 1st, see what happens

what are you using to read your levels?

also, which is on which port?

 

Okay i found DISABLED ULPS Checked on Trixx. :O Gonna try doing those things. Also im using Overdrive to read my Levels and using HDMI

 

Okay i give up, it seems like i have to disable my 2nd display to get my clocks idled, eventho im not using it atm.

 

you shouldnt, theres something else going on..

you need to reboot after turning ulps back on, its a reg setting...

id disable trixx and just use AB personlly, the profiles might conflict..

 

Thanks for all your help mac i will try that. I feel so stupid lol

 

i found out allot of this crap doing stupid **** too...

lol

 

lol still having the same problem no matter which display i currently display on, Eventho the other one aint showing anything shouldnt be sucking up 1000 memory. I have to disable atleast one to idle.

100/150 all is well now when one is disabled :]

 

which ports are you using?

get rid of trixx if you are using AB they might conflict.., and make sure you have the latest beta...14 i think,,,

 

DisplayPORT to DELL IPS Monitor and HDMI to 40" HDTV Also i don't really use programs like Trixx or MSI Afterburner. But however i have latest beta 14 of msi afterburner installed, dont really mess with it.

 

hmmm...can you try switching to DVI on the tv?

AB does allot more than trixx, no reason to have both, and the profiles may interact poorly...

 

These give me artifacts everywhere in SWTOR on my 5850

 

di you have the compatiblity windows xp trick for swtor ? that made artifacts for me also with 12.3 RC , if thats it just disable it ,

 

Just had my first ever 'Driver Not Responding, and Has Recovered' with these.

 

:banana:I think with this drivers my crossfire config get the most fps on BF3 but with some sttutering in the middle but in terms of performance they are sweeet...Try a litle harder AMD and you are there..

 

Lol. Well I thought these drivers were suppost to fix the battlefield bad company 2 crossfire flicker. Still flickers like crazy. Also tried out the 8.96 betas that was also a no go. Both of those drivers are good for BF3

 

Semi-solved my problem

This release candidate seems to have solved my very persistent problems with CCC ruining detection of 2 of my 3 screens. Windows will - with all other versions back to and including 11.9 - normally see all 3 screens (Lenovo LT2252P) but upon installation of CCC it all goes south and neither Win nor CCC will detect the screens. CCC and Win both send signals out to all 3 monitors when I click "detect", but will promptly disconnect them again.

This is not the case with 12.3, to my great relief.
Only problem is that the 3-screen eyefinity won't register in game - for instance WoW - as 5040x1050 anymore, but only as 1680x1050. WoW sets the recommended video settings LOWER than with my old 5770-card. With dual 6870's in CFX! They'll not even run the game smoothly while leisuring about in a town, doing nothing much. Even with the lowered settings! That's a bit of a problem.

I am new to CFX, so I have no idea how to solve this issue, or if it's possible at this point - but the screen etection problem - which I know have affected others as well - seems solved anyway.

 

There is a fix to remove artifacts caused by this driver on Skyrim?

 

I didnt know that, because I use software decoding

any preformance improvements?

 

somebody has never overclocked their card to the limit before :3