MSI Afterburner APP 1.1 beta 1 (2011/10/24)

wooooooooooooooooaaaaaaaaah NICE! working on my Samsung Galaxy S2 !

but problem when using 2 Gpus as i have 2 X ati 5870.

 

We don't have full multi-gpu support yet. But can you please provide more details on what problem you are having?

 

I get this when I left click the Server tray icon.


When I go to run the Server I right click and run as admin too.

 

Can you open a command prompt, enter: netsh http show urlacl
Send me a PM with the output please. Thanks.

 

Hi. I've tried to change voltage in Afterburner APP for Android (on android-x86 running on vmware) using N560GTX Ti HAWK without Active Phase Switch installed, running on Win 7 64b CZ (comma as decimal separator).

Multimeters show default voltage 1.006 V for GPU, 1.351 V for memories and 1.052 V for aux voltage. Maximum values allowed by Afterburner 2.2.0 beta 5 are +.150 V for GPU, +.080 V for memories and +.030 V for aux voltage.

If I set voltage in Afterburner APP for Android (if I select +0 for GPU, +0 for mem and +0 for aux voltage) and apply change, the voltage for GPU goes to 1.154 V (+0.136 V) and memories goes to 1.588 V (+0.237 V) for approx. 10 seconds (aux voltage changes to correct value immediately).


After that it changes to correct values (which i set in Afterburner APP). Afterburner 2.2.0 b5 for Win sets correct voltages immediately.
[URL="http://extrahardware.cnews.cz/files/images/clanky/2011/08srpen/afterburner-app/afterburenr-app-applied-after-10sec.jpg][/URL]
If I change +.020 V for GPU or mem, the values are even higher (+.156/.257 V)

I suppose this is not ok, is it?

edit: Maybe Afterburner 2.2.0 issue (or feature?) - if I set frequency of core or memory in Afterburner 2.2.0, it also increases voltages to +1.140/1.588 for some time. But if I change voltage, it switches to correct values immediately.

Afterburner APP makes the same if i just press Apply without any change.

edit 2: mmmm.. forget it, it probably just switches to 3D voltages for a while after aplying changes in 2D.

 

the first picture you posted was voltage of 3D mode.

the second picture you posted was voltage of idle mode.

 

is RC3 the same? has there been any changes between the release candidate and the non beta version?

i dont see any updates on the Market yet.. its still showing 1.0 RC3..

 

can't connect, unable firewall does not work too

 

The file will be updated to market by tomorrow. The major changes:

1 – “monitor only” and close/reopen the server - it is performing in read only mode (access denied to OC functions) but the menu item is not checked as it should be
2 –Update the remote server to deal with this regional language issue.

 

Can your cellphone connect to your desktop through wifi?

 

thank you.. :cheers:

waits patiently!... :micro:

 

I never tried with my desktop but with my livebox

 

heres a better way to secure the connection.. opening port 80 on a firewall is not very good..

what i did after install is...
right click the Remote server icon, goto HTTP Listener, change the 80 there to a random number say 5678..
next goto the windows firewall inbound rules.. click new rule on the top right.. a new window will popup.. select Port, next, type the port you set in remote server, this case, 5678, next, next,next, give it a name, i used MSI Remote Server and click finish..

now to connect from android, go into settings on the msi app, select host IP address, type in the pcs/servers IP address followed by the port ':5678' (xxx.xxx.xxx.xxxort)

now you should be able to connect.. and not have port 80 open for malware to use as a foothold

 

Working supurb , what I like about it is that you see the 2 gpu's when they are not synced. Easier to oc.

Thanks for this App.

Some pictures:

 

this is great.. ive been using it alot the past few day when running games across 3 monitors..working perfect

theres a couple of thing id like to see in the app if they are possable..
1) a Hardware monitor graph
2) Profiles applyable from the android app (just applable buttons, the profiles already have to be setup in afterburner on the pc)
3) of course support for multi-gpu's

i have a gtx470+9400GT, they both show under overclock, but the hardware monitor is only showing GPU1

 

Mine are both shown in graph , look at my screenshots , GPU1 And GPU2.
But they are 2 GTX570's so not different cards.

 

1) you meant the same graph as desktop afterburner ?
2) we are developing it...
3) it's not perfect yet, but we are doing our best to fully support it.

 

Your system looks so cool :banana:

 

1) yes, something like the graphing in afterburners hardware monitor rollout..
the android app could just take the values it gets and plot them on a graph screen..

2) & 3) thanks!.. awsome.. cant wait!..

 

Thanks m8 !!