ATI 10.10c Hotfix Drivers Download

Hello All

Im seeing a lot about this new MLAA (4xAA at next to no performance hit).
Sounds great, but what games will use this?
Anyone test it out in games and seen a performance increase?

Cheers guys

 

For now only one Starcraft II.
Everything else MLAA kills the performance. 4xAA is better looking and faster 99% of the time.

 

2nd GPU for SC2 and DR2 still idle (sigh)

 

Unistall CCC
dont reboot
Install CCC again

GG

it worked here since 10.9 lol (try it )
( JUST THE CCC NOT THE ENTIRE DRIVER )

EDIT: i got this problem too, with warnings and the s***t did not open hehe so i solved my problem with this "method"
(sorry for the english :B )

 

The Dead Rising 2 profile added in the 10.10 drivers intentionally disabled CFX to avoid the game running slower on multi-GPUs than one.

This is how ATI 'fixes' the majority of games I've played this year although it is a small mercy that the four (five?) month old Prince of Persia: The Forgotten Sands finally got a 'proper' CFX profile this month that means I can FINALLY play the game without the framerate tanking every time the prince dies. It took ATI bloody ages to fix that and I'd reported it numerous times over the last few months.

 

5 revisions on and CFX is still broken in BFBC2 DX11, I dont know what it is about 10.5a that is magical, but crossfire always works on it with all the games out there, why is it so hard to implement it into 10.10, beats me...

 

Work perfect here ... no problem with BC2 .. tested with MSIA ( for gpu usage ) and fraps for fps ....

 

Also reviewers don't mention any problems regarding crossfire and BFBC2. I know that a lot of people are reporting problems though.

 

Reviewers tend to install drivers on PCs that have a clean install of Windows though.

I suspect that many of the issues are cumulative and very much depend on what else you have installed or even had installed which likely explains why some people reports issues and others don't. Even a clean install of the drivers won't necessarily work if there's a conflict with some other application installed on your PC for example.

 

question for who have 2x5970 and 10.10c:

Is it possible to switch between xfire enable/disable without windows crash? ;_;

 

I have done clean installs in the past, however noticed no real difference.

 

10.10c seems to fix my crossfire issues with BC2 where 10.10 didn't do anything on the 2nd GPU. Running 4870 x2

 

Yes BC2 is running fine for me now even with dx11, as it used to do. I dont know if its just the drivers, or the new patch, but had just an hour of FUN again as it works again. Thank you, whatever fixed it, im happy.

For me it works in all games, looks great and does not kill my performance, quite the opposite, as I only need 2xAA on my games and aa instead of looking jagged as x2 does even on 1920x1200, but all my games look perfekt now. No jaggies to speak of, and the blurryness some are talking about, I dont see it at all. The only thing I see, is Fraps FPS counter looks different, so does ingame text and menus too. Not bad at all, looks more cartoonish rounded looking text. Otherwise this feature has been a super success atleast for me.

 

For those still having problems installing 10.10c drivers or activating additional features I would like to note, that DNA has released a 10.10c based driver with Vista support and optional modded infs for 5x and 6x cards. Installed fine on my 4870... did not try experimenting with MLAA, since I'm getting a little tired with reinstalling drivers over and over again for no good reason apparenty.

One question, though: does it make sense to install 10.10 CAP over 10.10c? They were released after the latest CAP after all...

 

You should to be safe, either way the latest builds will always be used.

 

What the hell are you talking about

I DO NOT HAVE THE PINK PROBLEM

Why would I adjust anything ?

 

People with HD5xxx says MLAA work only under DX9. I just tested it with Counter-Strike Source: I get flickering and it's not working under HD4xxx.

Anyway I made a modded inf for 10.10c that should work for everything (HD2xxx to HD6xxx), depending on your serie model, it will show more options under CCC, you will see MLAA, but doesn't mean it will work.

Because I'm curious, I unlocked these keys AMD put off in *.inf:

[ati2mtag_Tweaks]
HKR,, MLF_NA, %REG_SZ%, 0
HKR, "UMD",MLF_DEF, %REG_SZ%, 0
HKR,, EnableUlps_NA, %REG_SZ%, 0
HKR, "UMD",EnableUlps_DEF, %REG_SZ%, 0
HKR,, SurfaceFormatReplacements_NA, %REG_SZ%, 0
HKR, "UMD",SurfaceFormatReplacements_DEF, %REG_SZ%, 1
HKR,, TFQ_NA, %REG_SZ%, 0
HKR, "UMD",TFQ_DEF, %REG_SZ%, 1
HKR,, TextureLod_NA, %REG_SZ%, 0
HKR, "UMD",TextureLod_DEF, %REG_SZ%, 0
HKR,, DXVA_WMV_NA, %REG_SZ%, "0"
HKR,, EQAA_NA, %REG_SZ%, 0
HKR,, Deblocking_NA, %REG_SZ%, "0"
HKR,, MosquitoNoiseRemoval_NA, %REG_SZ%, "0"
HKR,, DynamicRange_NA, %REG_SZ%, "0"
HKR,, BlueStretch_NA, %REG_SZ%, "0
HKR, "UMD\DXVA",MosquitoNoiseRemoval_DEF, %REG_SZ%, "50"
HKR, "UMD\DXVA",MosquitoNoiseRemoval_ENABLE_DEF, %REG_SZ%, "1"
HKR,, MosquitoNoiseRemoval_NA, %REG_SZ%, "0"
HKR, "UMD\DXVA",Deblocking_DEF, %REG_SZ%, "50"
HKR, "UMD\DXVA",Deblocking_ENABLE_DEF, %REG_SZ%, "1""
HKR, "UMD\DXVA",Denoise_DEF, %REG_SZ%, "64"

http://www.megaupload.com/?d=JBGSYQS3

 

tnx for the link now i have the options in my ccc,:banana:

 

I found a DXVA bug with this drivers (maybe with others 10.10s too). I've been watching StarWars coded with x264 using DXVA. Everything was fine. When I finished, I closed videoplayer (Cyberlink). 30 seconds later I opened a x264 videoclip. My system started to freeze, player could not draw even its window, and video played without sync near 5 fps. Even Aero started to lag. Tried different videos, everything supported DXVA played the same in Cyberlink, WMP, MPC-HC. But when I stretched window smaller in 2-3 times video's real size, it played normal. Anything non-DXVA (DivX, MPEG4, x264 Software) played normal.

Tried to check/uncheck video options in CCC - no rezult. Only reboot fixed this.

 

Does anyone have a jagged (aliased) and pale Aero mouse cursor since they upgraded to 6870?



Normal cursor on the left, the faded cursor I get with 6870 on the right.

Found someone else with the issue here: http://hardforum.com/showthread.php?p=1036353492#11