Fermi, GTX460, GTX470, GTX465, GTX480...Bios Modding..Edit Voltage restrictions-mods

Hy,

here it is...

Both Cards at same speed and 3d voltage now, Voltage unlocked and min. fan @ 50% max. @ 100%



greetz Beta

 

hy mate,

First, your minimum Fan speed was standart @ 40% so i left it there..
Are these CLocks stable @ ur standart Voltage settings?

heres the rest



Core@ 810mhz, ram@ 4000 mhz..

greetz Beta

 

Thx for the fast reply..)

 

Whats the best aftermarket air cooler for evga 480

Thanks

 

Accelero Xtreme Plus..

Best VGA cooler u can get ...They make the Best ones

--> http://www.arctic-cooling.com/catalog/product_info.php?cPath=2_&mID=619

 

cant find it fore sale in the usa

what about the zelmon v300n ??

 

Thanks Beta!

 

Beta, quick question,

how do i ensure the Zotac BIOS only goes to the Zotac card, and the EVGA BIOS only goes to the EVGA with the command line, since i am using SLI?

Thanks.

 

öhm, thats easy...take out the evga card, flash the zotac ine, then put in evga card, take out zotac and flash the evga...



that is what i would do to be totally shure...

i also think it is recommend to only have one card installed when flashing,,,

after u flashed both u can put both back in at the same time..

greetz Beta

 

Beta, can you cange my minimum fan speed to 35%. TY

 

Hello. I have Inno3D GT460 with 768 mb DDR5.

My fan is at 40% speed minimum, can't go any lower with AfterBurner, and its loud, ~2800 rpm. I think 30% will be better, so i will be really grateful if u can fix this for me. Can u please do 2 version of the bios - one with 30% fan speed, and one with 20% fan speed.

My bios is .bin file (renamed as .txt), attached below.

Thanks in advance!

 

sorry mate,

there is no Tool out there that can change fan speeds in BIOS for gtx 470 or gtx480...only gtx460 and downwards, like gtx450 etc etc

greetz Beta

 

no problem..

here u go..delete the *.TXT at the end...

greetz Beta

 

Hi Beta,
I have asus gtx 480.
Please, unlock voltage for gpu.
Thanks.

 

Hi BetA13

For this BIOS could you adjust the 3D core/mem to 800/2000 mhz
and the idle voltage 0.825V and for 3D 1.025V?

GPU is gtx470 amp
Thanks!!

 

hy there..

here u go..

Voltage unlocked..




Greetz Beta

 

hy there..

Are u shure these idle Volts are stable @ 0.825V ?
And did u test if 1.025V is stable for these 3d Clocks?

Please report back if they are

heres ur modded Bios..



Greetz Beta

 

Thanks.

 

Thanks for the quik reply and yes... iv'e tested 2 months with AB
btw is it possible to mod a fan profile like in ab?
cheers!!

 

im sorry, fan settings in Bios are only for gtx460 and newer..
Theres no Tool right now where u can change fan settings in Bios for the GF100 series..

greetz Beta