Fermi, GTX460, GTX470, GTX465, GTX480...Bios Modding..Edit Voltage restrictions-mods

hi

Please change this item's for me :

Core : 850 MHz
Memory : 1000 MHz (4000 MHz)
Core Voltage In 3D : 1.138v
Idle Voltage : No Change

----------------------------------------------

And This :
Core : 850 MHz
Memory : 1000 MHz (4000 MHz)
Core Voltage In 3D : 1.125v
Idle Voltage : No Change

Bios

 

You want me to change 2 Bios?
Where are they?
I need your bios to to this hehe..

Greetz Beta

 

sorry i forgoten

Tanks

 

sorry, cant download it, it says page not there..

Could u please upload it somewhere else?
MediaFire, Rapidshare, uploaded.to
or as an attachement? just rename it like this:

YourBios.bin.txt and send as an attachement..

greetz

 

ok i'm sorry

tank you very much

 

oki doki..
Here it is..

Gpu @ 850
Ram @ 4000

Voltages @ 1.137 and one with 1.125

Pic:


Rename/Delete the *.TXT at the end..

greetz Beta

 

MerC ( Special Tanks )

I cant stable at 2200 or 2100 for memory ! what do i do ? are you have info

 

thats different from card to card, but i think 2000 (4000mhz) on Memory is pretty good..

But i wouldnt put more voltage on it..I dont think the Ram will go higher..

Greetz Beta

 

Using usb I am trying to flash gpu bios. I have successfully saved original bios with nvflash, but can not seem to get the modded bios to flash. Can anyone see what I am doing wrong?

 

del.

 

How put the Voltage to memory for better ocing ?

tanks

 

Here u go:

Remove .txt from file
And also watch if fanspeed goes up when card is overheating if u are not using Afterburner`s fan control

 

Hy,

you CANT set Ram Voltage for this Card..The only Vga Card that supports VOltage settings for Ram is the GTX460 HAWK Edition from MSI...

The only Voltage u can set is the VCore VOltage for ur GTX480...I u want i can remove the VOltage restriction, then u can set it via Afterburner if u want..

Greetz Beta

 

Sorry to bother you again. i just noticed that my fan speed is limited to 70 % can you please max out the voltage and set the fan limit to 100% for these bioses?

 

Hi BetA13!
Can you fix my bios ? inno3d 1gb,
just want a silences in 2D
pls set fan at 20% in 2D 51/101/135
and 405/810/1800 too.
3D to leave without changes
thx

 

BetA13 can you remove the Voltage restriction for my cards, and also can you
set fan min to 55% and max to 95%.

Thank.

http://forum.giga-byte.co.uk/upload/files/BIOS_N460OC-1GI_F3.zip

 

sorry, changing fan speed affects all modes..no matter if 3d mode or 2d mode..

but that is not an Problem..

ill set min. @20% and max @ 100%

ok?

Anyway heres the Modd Bios:

Pic:

 

Here you go...

http://www.mediafire.com/?r8ocsbzbpmu3xrc

All Bios Fan speed set to 100% max and voltage restrictions maxed out..

greetz Beta