Afterburner 1.6.0 Beta 5 + Kombustor 1.07 (2010-04-19) Add 470 Over-voltage

Discussion in 'MSI AfterBurner Application Development Forum' started by Garrett_Wu, Apr 19, 2010.

Page 4 of 7
  1. davido6

    davido6 Maha Guru

    Messages:
    1,441
    Likes Received:
    19
    GPU:
    Rx5700xt
    so its not your work could do with telling ever one then before ever one donloads it and and something bad happens
     
    davido6, May 13, 2010
    #61
  2. basco

    basco Guest

    Messages:
    130
    Likes Received:
    4
    GPU:
    560tfII
    would be a good idea to delete the link

    this should give very inaccurate volts and sometimes a lot higher then you dialed in. very risky.
     
    Last edited: May 13, 2010
    basco, May 13, 2010
    #62
  3. Unwinder

    Unwinder Ancient Guru Staff Member

    Messages:
    17,198
    Likes Received:
    6,866
    Looks like some of extreme overclockers who got unlocked build form MSI leaked it. That is NOT inaccurate at all, this hidden parh it works directly with VRM and unlike reading target voltage it uses VRM voltage sensor to read the REAL output voltage on the graphs, you were never seeing REAL output voltages before. And real output values are supposed to be higher/lower than actual target and fluctuacte depending on GPU quality, load etc. This mode disables 2D/3D voltage switching and requies deep understanding of this VRM voltage control principles. I'd recommend noobs misunderstanding what to expect from this build to stay as far from extreme versionas it is possible.
    And thanks a lot to taht idiot who leaked it. Now I have to address all these false reports about "bad version". Damn. Personally i'll think twice about providing extreme version to any overclocker next time.
     
    Unwinder, May 13, 2010
    #63
  4. systemlord

    systemlord Active Member

    Messages:
    76
    Likes Received:
    0
    GPU:
    EVGA GTX 480
    deleted
     
    systemlord, May 13, 2010
    #64

  5. davido6

    davido6 Maha Guru

    Messages:
    1,441
    Likes Received:
    19
    GPU:
    Rx5700xt
    is anything in that version going to be in the next build ?
     
    davido6, May 13, 2010
    #65
  6. systemlord

    systemlord Active Member

    Messages:
    76
    Likes Received:
    0
    GPU:
    EVGA GTX 480
    What is going to be in the next build?
     
    systemlord, May 13, 2010
    #66
  7. Unwinder

    Unwinder Ancient Guru Staff Member

    Messages:
    17,198
    Likes Received:
    6,866
    No. That version is nothing but beta 5 with unlocked unlimited voltage control path via hardware database. And no, we don't plan to give such functionality that to public, I've repeated that a few times already. And extreme builds are intended for only for _REALLY_ experienced extreme overclockers breaking records on different overclocking competitions. Such builds require deep understanding of voltage control principles and not intended to be used by noobs. And seeing like some "nice" guys decided to leak extreme version, I'm not even sure if we'll provide any more extreme builds to anyone in future.
     
    Unwinder, May 13, 2010
    #67
  8. systemlord

    systemlord Active Member

    Messages:
    76
    Likes Received:
    0
    GPU:
    EVGA GTX 480
    I plan to add a Danger Den water block to my GTX 480 and would like to perform a nice overclock but nothing in the extreme like overclocking competitions or breaking records. However I would like to understand everything about the voltage settings and what/how the "Force Constant Voltage" setting effects or works, my brain is hungry like a dry spoung, please help me feed it by linking me to the knowledge seriously in a PM.

    :)Thanks Systemlord.
     
    systemlord, May 13, 2010
    #68
  9. systemlord

    systemlord Active Member

    Messages:
    76
    Likes Received:
    0
    GPU:
    EVGA GTX 480
    Can some please help me find the file to unlock my GPU overclocking frequencies, I'm a huge noob when it comes to RAR, I've looked everywhere for the Afterburner.ini file that I was told could unlock it for me! If I was working with Zip I wouldn't be here asking for help! I did find this >

    [Properties]
    ShowGeneralTab = 1
    ShowFanTab = 1
    ShowMonitoringTab = 1
    ShowOnScreenDisplayTab = 1
    ShowScreenCaptureTab = 1
    ShowProfilesTab = 1
    ShowUserInterfaceTab = 1

    [Settings]
    Skin = default.usf
    StartMinimized = 0
    StartWithWindows = 0
    RememberSettings = 0
    FirstRun = 1
    FirstUserDefineClick = 1
    FirstServerRun = 1
    HwPollPeriod = 1000
    MMIOPageSize = 4
    PCIBusFilter = -10h
    ShowTooltips = 1
    ShowHints = 1
    PauseInSuspendedMode = 1
    CurrentGpu = 0
    Sync = 1
    AttachMonitoringWindow = 1
    MonitoringWindowOnTop = 1
    ShowPerformanceProfilerStatus = 0
    LCDFont = font4x6.dat
    LCDScrollTimerPeriod = 30
    UnlockVoltageControl = 0
    UnlockVoltageMonitoring = 0
    ShowOSDTime = 0
    RestoreAfterSuspendedMode = 0
    StartupViaTaskScheduler = 0
    StartupDelay = 0
    MinMonitoringGraphHeight = -1
    LocalizationDebugFlags = 0
    EnableLog = 0
    RecreateLog = 0
    LogPath =
    DontStopLoggingOnWriteFailure = 0
    LogLimit = 10
    ForceConstantVoltage = 0
    AllowCaptureVoltageDefaults = 0

    [ATIADLHAL]
    EnableUnofficialOverclocking = 0
    AccessibilityCheckingPeriod = 0

    [NVAPIHAL]
    ClockDomainIdWorkaround = -1
     
    systemlord, May 13, 2010
    #69
  10. basco

    basco Guest

    Messages:
    130
    Likes Received:
    4
    GPU:
    560tfII
    sorry unwinder,
    should not mean bad version of ab,just wanted to obtain not to use it.


    thanks syslord for removing(enableunofficial=1)
     
    basco, May 13, 2010
    #70

  11. systemlord

    systemlord Active Member

    Messages:
    76
    Likes Received:
    0
    GPU:
    EVGA GTX 480
    What are you talking about?
     
    systemlord, May 13, 2010
    #71
  12. basco

    basco Guest

    Messages:
    130
    Likes Received:
    4
    GPU:
    560tfII
    if you take your question and then my words in ()
    then there is your answer
     
    basco, May 13, 2010
    #72
  13. systemlord

    systemlord Active Member

    Messages:
    76
    Likes Received:
    0
    GPU:
    EVGA GTX 480
    I didn't remove anything, I copied what was in the fold and that's it, I removed nothing. Naturally I'm confused as to your gratefulness? :3eyes:
     
    systemlord, May 13, 2010
    #73
  14. davido6

    davido6 Maha Guru

    Messages:
    1,441
    Likes Received:
    19
    GPU:
    Rx5700xt
    hmm from mine looks to be the same as his i dont see the bit u put in ()
     
    Last edited: May 13, 2010
    davido6, May 13, 2010
    #74
  15. basco

    basco Guest

    Messages:
    130
    Likes Received:
    4
    GPU:
    560tfII
    sorry it was my mistake(boogieman did remove it so thanks to him)
     
    basco, May 13, 2010
    #75

  16. basco

    basco Guest

    Messages:
    130
    Likes Received:
    4
    GPU:
    560tfII
    if you want to go over ccc limits its enableunofficialoc=1
    if its that he wanted to know
     
    basco, May 13, 2010
    #76
  17. davido6

    davido6 Maha Guru

    Messages:
    1,441
    Likes Received:
    19
    GPU:
    Rx5700xt
    well hes on a 480gtx i think and does ccc mean ati by any chance
     
    davido6, May 13, 2010
    #77
  18. basco

    basco Guest

    Messages:
    130
    Likes Received:
    4
    GPU:
    560tfII
    yeah i should really go to sleep and shut up
     
    basco, May 13, 2010
    #78
  19. Wanny

    Wanny Guest

    That looks like my card too. Some of us can't OC the memory much.
     
    Wanny, May 14, 2010
    #79
  20. davido6

    davido6 Maha Guru

    Messages:
    1,441
    Likes Received:
    19
    GPU:
    Rx5700xt
    i must be lucky then since im not far from 4k on my mem but then i had to stop useing msi and use another prog to get there ive got a thread about it in nvidia bit look it up might <help u<
    allso best to keep other progs from here since this all about msi m8
     
    Last edited: May 15, 2010
    davido6, May 15, 2010
    #80
Page 4 of 7

Share This Page