Geforce/Ion Driver Release 195.55

Crysis Wars is stuttering away anyhow dont no about the single player but no doubt it will be.

 

Volumetric shadows and lighting probably.

 

Yes, its a M$ problem... "by design".

This is the first driver, which shows the temps correctly!
Before ambient and core temps keep the same... at least both at ambient level.

Now, with 195.55, the temp shows up correct... ~42° ambient and ~50° core in idle.

@driver

For now, everthing works fine (a lil stutter in FO3 of course... as with all 190ies), looks good and performs great.
MultiDisplay functions work like a charm (as with all 195ies) and no scaling at all (as with ALL drivers for Win7).

These are keepers for sure!

Razor

 

Interesting. Thanks for the info, TheHunter.

I still don't see why Microsoft had to change the way Windows reports the refresh rate when it obviously had negative issues with some games. 59.94 Hz is surely 60 Hz anyway so why confuse matters by showing both 59 Hz and 60 Hz? Are they not really the exact same thing?!?

Going to roll back to the 191.07 WHQL drivers now as it seems I'm not the only one having problems with these. The fact that two of my games crash is enough for me to abandon these clearly beta drivers. I just hope that when the WHQL drivers do arrive that NVIDIA fix these problems.

 

Avatar demo crashes after showing splash for maybe 2 - 3 seconds.

Problem Event Name: APPCRASH
Application Name: AvatarDemo.exe
Application Version: 0.1.0.1
Application Timestamp: 4afa079b
Fault Module Name: nvd3dum.dll
Fault Module Version: 8.17.11.9555

Anyone else getting this??

 

this is good or bad driver ?

simple question need simple answer

thank you

 

Crysis/Warhead, FC2, MW2 all run better than ever for me with this driver!!

Don't really care about Avatar demo so I just uninstalled:biggun:

 

Very good driver for my win 7 system. Dragon Age: Origins, Mass Effect runs smooth. AA works. Even gained about 100 points on 3D Vantage. MSI AfterBurner overclock runs ok. 3D/2D clocks are working perfect. The most kick-ass driver at the moment.

 

It seems most problems are with sli systems , like mine , all 195.... series make my system puke.

 

Hi

I cant install this driver.

i have the old driver uninstall and in save mode with driver sweeper cleaned.

the new driver unzip the file and after this installed the driver in 5sec and it comes the message: your sytem was not modified .....

Thx for the help and sorry for my bad english


Win 7 64
I7 920
Gf GTX275
6G Ram

Edit:
Ok the driver runs now for me.

the problem is when i unzip the driver fils in the standard C/Nvidia directory.
the driver installation works not for me.
I try to unzip the fils in a new directory and the the driver installation works fine.

curious

 

as said upper, PES 2010 crashes with these.
With patch 1.02 it causes BSOD in nv4_disp.dll.
Reverted to 195.39, everything is fine..

 

Exactly. So don't use 195.55.

 

That very much depends on the games you're playing really.

In my case the fact that Pro Evo Soccer 2010 and Operation Flashpoint: DR crash on loading with these drivers was enough for me to rollback to the 191.07 WHQL drivers, a set that I've absolutely no major issues or crashes with.

 

GTA4 crashes all the time

 

I have to agree atm. Seems like if you have a single card, then this driver is worth a shot. If you have an SLI system, then the 191.66 is the best or an older driver. Just my .02

 

Guys for <<beta>> they are good......

 

i've seen allot better "beta" drivers.

 

agree. worst performance for me with THESE beta's.

 

So these are no good for sli? damn I was hoping this set would have a working sli profile for l4d2. I'm running 191.07 but have tried 195.35 and both give either slow performance(afr1) or buggy flickering shadows (afr2). Was gonna try the .66 suggested in this thread but can't seem to find them....
nvm didn't realise they are quadro drivers.

 

Remove 3ddriver
Remove Physx
Remove Driver.

This you do in add or remove programs,don't reboot.
Then run drivesweeper , and mark driver and physx , now reboot.

Now install , this is how i do it and never had problems.