ATT beta with HD 3xxx (and may be 2xxx) support

No needs to edit it. Just leave it alone

 

hi Ray , late but not forgotten ....

i tried to overclock with CCC and ATT (1.4.7.1144) .
checked with Everest (beta) / GPU-Z don't work (w1zzard know's that).

only with CCC - clocks for both cores in everest are 'identical'


only with ATT - GPU1 is still at 300MHz ('apply to both cores...' is checked)


any idea ?

 

2 antzen - I didn't write that I already implemented support for CF and X2 boards "Apply to both..." options is in test stage.

_________

Uploaded new beta version of ATT build 1145.

+ Now ATT will read clocks from board registers so you will see real clocks. And if you already saved some profiles you should save them again with real applied clocks.

http://cid-a50350ea7a969f0c.skydrive.live.com/self.aspx/Public/attsetup.exe

 

build 1145 :



148.5MHz ? should be 300 ....

 

Hi Ray,

i have hd 2900xt 512 mo (743/828) , Cat 8.3 no ccc, att 1145.


with att in "Hardware-> Overcloking settings" when i apply my core/memory speed, it reset my frequencies by default.
Overdrive 5, give me an error message : unsupported.

what kinds of information do you need to try ti fix it?

 

In this latest version there is something wrong with clocks readings: core 499,50 Mhz and memory 37611,00Mhz!!!!:3eyes: In the previous version ATT read correctly 2D clock.
Instead Fan control works properly in manual mode!
I haven't tried to overclock my HD2900XT 512 MB.

 

2 antzen:
First, sorry for may bad english. I will try my best.
I think i had the same problem for my RX3870.
I maked two profiles, one with low voltage and low frequencies, then i wanted to make another profile with the maximum standard frequencies, but every time i clicked on "Apply" the GPU-frequency only went to 300MHz. I thought about it and came to the conclusion that the GPU-frequency is based dynamicly by the ATI-Driver (even in Omega drivers too).
So i opened the ATT and went to "Tools & Options" --> "General Options" and ther to "Advanced" and unchecked "Use overclocking limits" after that my High-Profile is everytime applied und the GPU is running at 800MHz

I hope this will help

 

hi mischi,

but i have a HD3870 X2 = 2 GPUs.
so my problem with ATT-overclocking is, that 1 GPU runs with 850 (like wished), but the other is still at 300.
overclocking with CCC set both GPUs to 850.

ps: my english is also not the best, i'm from germany :grin:

 

antzen, what do you have Avedesk or something to show your temps like that?

 

2 enessel:

this is Everest (from Lavalys).
you can enable an OSD or a Vista sidebar with various (customizable) parameters.
always on top, very helpfull for overclocking or stability-checks.

 

Anyone who has a problem with clock detection on last 1145 build. Please post SysInfo report here.

 

Ok. It seems thats Core names database in ATT is outdated I just uploaded new beta version build 1148 with most recent database included. This database required for proper core and memory clocks calculation.
So everyone who has a problem download new version.
http://cid-a50350ea7a969f0c.skydrive.live.com/self.aspx/Public/attsetup.exe

 

2 Ray:

just testet 1148. clocks are correct now.
also tested "apply to both..." - now creates a freeze of ATT (happend not with 1144)...

 

hi

The voltage can no longer raise 1.3v with 1148?

I have the value at the entry opt_allow_hv=1 amended.

But there is a maximum of 1.3 voltage displayed

greets

 

Sysinfo

I have Sapphire HD3850 AGP and this is my sysinfo:
Display adapter ATI Radeon Graphics Processor AGP (0x9515)
Core Name RV670
SubVendor Sapphire (P.C. Partner) (174B)
SubDevice 0028
BUS 1
Device 0
Function 0
Base Address 0 C0000008
Base Address 1 0000D801
Base Address 2 BF000000
Base Address 3 00000000

Bus Type AGP
Current AGP Speed 8x
SMARTGART Installed Yes

Driver Version 0
Release Version 8.452-080109a-057974E-ATI
QuadBuffer Stereo Support No
Catalyst Registry Path
System\CurrentControlSet\Control\Video\{3650FBF9-0839-47C7-9195-008F11688402}\0000

______________________________
Clock Information
BIOS VPU 669,00
Current VPU 533,25
BIOS MEM 829,00
Current MEM 828,00

______________________________
Overdrive
Supported Yes
Type PowerPlay
Level 1
GPU 535,00
MEM 828,00
VDDC 1,17
Level 2
GPU 535,00
MEM 828,00
VDDC 1,17
Level 3
GPU 535,00
MEM 828,00
VDDC 1,17

______________________________
Radeon PCI configuration space
00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F
00 02 10 15 95 07 00 B0 02 00 00 00 03 10 40 00 00
10 08 00 00 C0 01 D8 00 00 00 00 00 BF 00 00 00 00
20 00 00 00 00 00 00 00 00 00 00 00 00 4B 17 28 00
30 00 00 FE BF 50 00 00 00 00 00 00 00 10 01 08 00
40 00 00 00 00 00 00 00 00 00 00 00 00 4B 17 28 00
50 01 58 03 06 00 00 00 00 02 00 30 00 1B 02 00 FF
60 12 43 00 1F 01 0D 00 00 00 00 01 11 00 00 00 00
70 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80 00 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00
90 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
A0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
B0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
C0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
D0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
E0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
F0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

Hardware Information ASIC (Software) Method
Family 71
Emulated Revision 41
Gfx Engine ID 6
VRam Bit Width 256
Installed memory 512
______________________________
OverDrive 5
Core clocks Min 485,00 - Max 720,00
Memory clocks Min 750,00 - Max 950,00
VDDC Min 0,97v - Max 1,25v
______________________________
FAN
1 00000026
2 0000201A
3 001D1187
4 00D31A14
5 4B46413C
6 5F5A5550
7 442F2016
8 7F6F5D50

______________________________
Video BIOS Information
Version 010.077.000.000
Part Number 113-AB43300-102
Date 2008/01/09 21:01
Vram Type DDR3

______________________________
Controller Configurations
Controller 0
Active Connections:
-Digital Flat Panel (0) 1280x1024x60
Controller 1
Active Connections:
No Active Connections

______________________________
Displays supported by adapter
0 (1) Monitor (CRT1)
1 (2) Second Monitor (CRT2)
2 (4) TV
3 (8) Digital Flat Panel
4 (16) Digital Flat Panel
5 (32) Component Video Output

______________________________
EnumDisplays
Display Type 0, Extended Type 1 , Max Resolution 1280x1024
Display Type 0, Extended Type 2 , Max Resolution 1600x1200
Display Type 1, Extended Type 0 , Max Resolution 1024x768
Display Type 3, Extended Type 1 , Max Resolution 0x0
Display Type 3, Extended Type 3 , Max Resolution 1280x1024
Display Type 4, Extended Type 0 , Max Resolution 720x480

______________________________
Loaded Displays
Display 1 index 16
Display 2 index 2
TV Index 4
______________________________
Multi VPU State
ulActiveAdapters 0
ulAvailableAdapters 0
ulCurrentAdapter 0
ulDongleCapabilities 0
ulDongleConnection 0
ulDongleDisplayIndex 0
ulPrimaryIndex 0
ulMVPUMaxFBSize 0
ulMVPUMaxPipes 0
ulMVPUMaxVisFBSize 0
ulMVPUState 0
State Bits
______________________________
Multi VPU Caps
______________________________
No additional information

 

Removed from source code because your board will not apply anything higher than reported by Catalyst. Its already tested by people

 

What can boards because more tension? I have a Sapphire hd3870, the "catalyst" is not 1.33 tension?
I am almost certain that my card with the old version was better overclock, I therefore went out, the more voltage arrived?
It is advisable vpu deactivate?

 

I can bring it back. But read a few last pages. One man already tested with multimeter that anything higher than reported by ATT range of voltages, will not be applied even if ATT will report that its applied.

 

Where exactly do you measure a voltage on the board?

 

It was not me.

Start from here
http://forums.guru3d.com/showthread.php?t=255769&page=10
User : Ludjak