INsane Overclock on my e6400 OMG!!!

hi all..
i oc my pc from 2.8 to 3.0 ghz and guess what...
the Vcore is Lower that stock (1.30000) to be exact,

i did prime 95 stress test and core temp reported a max temp of 50 Degrees...

here are the details..
375 x8 = 3 GHZ
ram at 750 (ddr2 800 Memory) 1:1 Fsb
Vcore= 1.3000
pci-e Freq= 100

everything else pretty much normal....

i just want to know if it is bad that my cpu is running only 1.3000 vcore at this oc should it be needing more power....?

 

no, that looks about right, i think mines running at 1.32v and ram at 815, i darent change anything without net access at home as i just destroyed my XP arsing with voltages last week lol

 

if the oc is running stable and the lower voltage i would leave it where it is and enjoy the lower temps

 

Mine does 3.0GHZ with 1.2v so you should be fine.

 

1.4v for 3.2ghz here, am I doing something wrong?

 

what a misleading thread title.. I was expecting like a 4ghz overclock

 

Damn I was expecting 100% on Air.

 

me too
more like undervolt o/c
which is sweet btw

 

3ghz whit 1.3000v here...

 

is that 1.2000, or 1.2 something...

also i am using all the power saving features line C1E i think and there were 2 other ones...

 

If youre using the powersaving features, is that voltage taken after its been on full load for a while? just curious

 

It idles at 1.225v but under load the V-droop goes to 1.2v.

 

LOL!! was thinking the same:giggle2: *First time mister?*

 

nothing wrong with that every one starts some where, 4gb is not to hard on a 6400 great little clockers and with some great m/b's and mem theses days it should be a lot better.

With that said you guys should be trying to run them in the 500's fsb thats when they honk 300's dont cut the musted

 

OMG, Phrozin is back. Where have you been man?

 

seems fine, mine is on 1.3-1.4ish

 

That's not a Core2 processor.