Hi. Saying I'm frustrated is a understatement I bought the Datapath VisionSC-DP2 Capture Card. I had the Vision DVI-DL before. The DVI card worked fine. But now with the new card: Whatever I do I just get detected my monitor at nvidia control panel. I dont get the 2nd output :-( (both - monitor and capture card - are connected via Displayport. With my previous card - the DVI-DL - it worked absolutely fine. But this card I'm so lost here. Nvidia detects only my monitor. I tested both inputs of the capture card, Displayport 2 and 3 of my graphics card, I tried a different displayport cable, but whatever I do - the capture card refuses to show up in nvidia control panel. Just my monitor is there :-( With this problem I obviously cant clone the signal to the 2nd Output and so the capture card gets no signal obviously.. I could imagine that a DVI connection would work again, but DVI would kill the purpose of the card with its much lower datarate. I hope someone can help :/ https://abload.de/img/desktop_2017_06_03_01bnsl0.png