Hi there. Proud to have been selected for the Thermaltake Casemod 2017 season 1!! So I wanted to share my work on the Tower 900. List of hardware: - Intel i7 7700K - Asus Maximus IX Code - Asus Strix 1070 8Go - 16 Go DDr4 V-color - SSD M2 V color 240Go - Tt ToughPower Grand 850W RGB Watercooling will be done with 2 loops with complete Tt parts. So let's go with some pictures
Hardware: Concerning the 900's mod, I want to make it a bit smaller ( about 12cm in its depth. But all modifications will be done in order to keep the original design. I want to make a mod, not a scratch build
Start with cutting the top and bottom of the case: While I was waiting for some materials, I bring some modifications on the PSU. Paint in carbon black with a few metal flake and finished with a matt varnish I also cut the Tt's logo in aluminium and created a new cover in acrylic with a smoked effect :dremel: After the materiels received, I started the real modding parts First layer of the side I used some rivet with internal thread ( don't know the exact name in english ) Second side done, and I also create a new part for the PSU plug
I replaced the back panel with an acrylic panel in order to see the inside of the case. And finally, the second layer And yesterday, I picked up some 18mm acryl and created strands for the two res: And the panel with composit aluminium ( gloss black ) New update really soon. See you
Hi there!! Small update with side panels complete and test with the rads and Riing RGB I also start to cut some part for the back of the case. That's all!! New update really soon
Hi guys!! I actually work on the tubbing, I will post a couple of pictures as soon as the loops will be complete. I Also finished to repair the top cover and added a new acryl part in place of the mesh Now I have to wait for the GPU waterblock to finish the left side of the case. See you
Heyyyy!! Today, I worked on the V-color's memory. It need a new relloking to fit with this mod First try. I think I will change something on the design see you
Hi! Small update. Still waiting for the last parts and some aluminium to complete the case. Today, I have made a small modification on the cpu waterblock End is near, so stay close for final pictures
Hi there. The end of the contest is there, so it's time to complete the mod and do a nice photo shooting. Final pictures soon
Hey!! Brief introduction for this project: I wanted to keep the Tt's spirit for this mod, preserving the overall appearance of theTower 900. I just have removed 15cm of thickness, and I wanted to create a front panel that looks like the Core P5. GPU and CPU have their own loop in different color, blue and clear with the res placed in the bottom of the case with new 18mm acryl stands. Some parts have been modded, Psu, CPU and GPU waterblocks The back of the Tower 900 have been modded too with moving the customised PSU in the middle of the case, create a new window and cutting the frame to give an open air look like. The top, shortened, receive a new part with a wide Luxa² logo. So, final pictures of the P900 are here: Hope you will like this mod!! A lot of thanks to Thermaltake and all partners who give us the luck to participate to a such great contest.