Guru3D.com Forums

Go Back   Guru3D.com Forums > Videocards > Videocards - AMD Radeon
Videocards - AMD Radeon AMD Radeon graphics cards. Do you have one or want to buy one? Use this forum to discuss anything concerning products using Radeon graphics cards, CrossFireX, from Radeon HD 7800 to R9 390X



Reply
 
Thread Tools Display Modes
Utilise AMD/Intel Power & RadeonPRO Tweaks&Tips
Old
  (#1)
OnnA
Ancient Guru
 
OnnA's Avatar
 
Videocard: Nitro Fiji-X HBM 1150/570
Processor: ZEN x8 k17 + Nepton 280L
Mainboard: ASUS Crosshair VI Hero
Memory: 16GB 3200 CL16 1T Ripjaws
Soundcard: SB-z Nichicon + Wood 5.1
PSU: Seasonic-X 750W Platinum
Lightbulb Utilise AMD/Intel Power & RadeonPRO Tweaks&Tips - 04-17-2015, 07:34 | posts: 2,766 | Location: HolyWater Village

Hello everybody

Last Updated V/17/2017 !

News, New Games/Engines announcements etc. See last Post's

Please read AMD Crimson Driver section !
Game Tweaks section is beneath this Main Post: The Witcher, Wolfenstein New, pCars, AC etc.


Table of Contents

1. AMD/ATI Site Drivers section + some Tweaks & New Moded Driver Compilation + Radeon Tools for Polaris

2. Tech Demos, YT etc.
3. Fine Utilise Power of RadeonPRO + Reshade 1.1 with SweetFX 2.0b
4. RADEON Registry Tweaking Section
5. Usefull Utilities
6. Optimal online gaming experience Tweaks
7. WinX & Win8 Tweaks
8. CPU Tweaks AMD/Intel
9. Games Deals, Keyshops Codes etc.[/SIZE]
--
Below main thread post#3, Games Tweaks and more:

10. X360 X1 JoyPad Emulation for older D-input USB JoyPads (i Have PS2 DualShock)
11. Radeon Fiji Fury-X Moded BIOS for better OC

12. CRU (Custom Resolution Utility) Tips, Tricks and Monitors OC (LCD/LED/CRT) (NEW!)

in post #3 you have Games Tweaks&Tips with updated Table of Contents
================================================== ==
Reserved for Giveaways:

Free Games and Giveaways !

Grab a free Game (steam key) Please check that site regularly (give e-mail and wait for Mail ) ->

https://www.indiegala.com

================================================== ==
For Editing ini's and other config's ect. Using Notepad++ is strongly recomended !

Notepad++ Download

Add Take Ownership for files/folders to ADMIN -> Make Windows Trully Yours !

Take Ownership to ADMIN on my MEGA
Remember not to change Windows Folder in any way after new Update ! Leave it as it is

================================================== ==========
New Section -> The News and Downloads !
================================================== ========

Drivers Section for ATI/AMD Radeon GPU's and APU's:

__________________________________________________ ____________________

Statin-Drivers Download Section, Great Drivers for Modifying

Also Please Remember one thing: Use FLEM 1.0 to modify ini's in those Drivers !

================================================== =======================

1.
AMD/ATI Site Drivers section WWW

ATI/AMD Radeon Software Crimson ReLive Edition 17.5.2
Driver Version 17.10.2711.1021


WDDM2
FH3 Fixed
Old OGL Games Fixed

-> Radeon ReLive, Radeon Chill, Radeon WattMan, HDR Gaming Support, VP9 Decode Acceleration
More insights about features can be found in AMD/ATI WEB site !

-> AMD/ATI Download Site


New revision adds 4-15% FPS boost for all GCN GPUs (Great Boost for Fiji & Polaris noted +8-15%)

AMD Crimson Driver, How to Have Solid Performance + Rock Stability

First Install Crimson Package from AMD/ATI WEB site (WHQL or Beta)
Then before Restart, install from 15.11.1 only CCC ! (if it will install drivers skip it, and do restart before this step)
AMD-Catalyst-15.11.1Beta-Nov14 Download from my Mega

Then make sure every .exe in
C:\Program Files\AMD
C:\Program Files (x86)\AMD
C:\Program Files (x86)\ATI Technologies
Have Run as Administrator ! (click right then Properties and add it, you can leave it alone also its not mandatory step)

Next don't Turn OFF AMD Fuel Service !!!!! should be Automatic if present.

Then for AMD CPU's users run icc_patch.exe (availble for download below in AMD CPU OC section)
And make sure you de-malwerize all above Folders + in Windows root: System32 and SySWOW
Scan it and then Patch ! RESTART

Now Add AMD Shader cache for all Games in Crimson/Games Panel
Not Global, but for every game you play:
AMD Shader cache = ON (for some Games better leave on Default)
Tesselation Override = 8 or 16 (Crysis3 have Even Tesselated Frogs and it uses Tess=8)
Also make sure to put AA option you'll need from Reshade 1.1 or RP SMAA.

Next if you're using 3rd party Fan Profiles, please make sure that everything is set properly.
(in Moded TriXX i Have Automatic Fan and in Crimson is also Auto)
Monitor Temps for short period when Gaming/Benching, And you'll be just fine.

Done, And Be Happy

++++++++++++++++++++++++++++++++++++++++++++++++++ ++++++++++++++++
Polaris Tools

WattTool: A simple tool that combines WattMan with VRM monitoring/tweaking for RX 400 series

Overclock.net The WattTool

PolarisBiosEditor


++++++++++++++++++++++++++++++++++++++++++++++++++ ++++++++++++++++

Also for Radeon Users and old nv 6xx/7xx and in the future 9xx ;-)
I strongly recomend to use Tesselation in CAT CC:
Tesselation Mode Override:
AMD Optimised in: AMD Game Evolved Games
x16/x32 in Other DX11 Games
and:
x8/x16 in Green Games
Don't worry no Quality will be Harmed but Performance Gain is Hudge !
For nV users use 3rd party Tweaker ! Or Tweak Registry ( 100% FPS gain)

Games won't Start -> My Solution

Right click on Games/Steam/Users etc. Folder and Security (also is good to check all Games Folders)
Advanced and change ownership - write Administrators (wait and close all)
Then after that (in Security Tab) click in EDIT and edit Admin and User Permissions to Full Controll !
Also is good to Have in all of thet folders the Users Profile with Full Control.

Now games will Save Game and run NP !
Work in Se7eN, 8ight and Win_X !
================================================== ===========

The shortcut commands, in the end of game path in Box
-dx12mt (forces Win 12 feature level - depends on Game eg. 9,10,11 only Win_X but i'm not sure about it )
-dx11mt (forces Win 8/10 using DX11.1 Multi Thread, working in every game with Win_X DX12 API)
-dx9mt (usefull for Skyrim with Mods)
-dx10mt (Usefull in DX10_x games)
-pthreads 6 (more cores? give it a shine)
-pthreads 12 (its mine, if you have 4 give -pthreads 4 etc.)

Sometimes needs to be after Quoted game path -> "game path" -dx11mt -pthreads 12
Example from my GoG AoW3
"D:\DX9\Age of Wonders III\AoW3Launcher.exe" -dx9mt -pthreads 6

Also works in Steam, Origin etc.
Some other tweaks:
"-cpuCount=6 -high -noSplash -maxMem=5120 -maxvram=3090 -exthreads=6"

2. Tech Demos, YT etc.

Unreal Engine 4 – Infiltrator Tech Demo Now Available for Free !!!!

Here Standalone DX11 ver. of the Infiltrator Tech Demo ! ->

Infiltrator Tech Demo Standalone

Get EPIC Unreal Engine 4 and run it in Editor >16GB RAM needed

and go to Learn Tab in it, download and run it !!

Also you can make shortcut for Infiltrator.exe and add in box

-D3D11mt -cpuCount=6 -pthreads 6 -novsync (better experience cuz Demo is NOT DX12 !!)
or if you like spikes ;-)
-D3D12 -cpuCount=6 -pthreads 6 -novsync
================================================== ==============
Polaris RX 480 BIOS Editor
Still in Developer stage !

github.com -> Polaris Bios Editor


ATI/AMD Flash Tool for Radeon Polaris GPUs
-----------
Unreal Engine 4 [4.9.1] The Unreal Deal Vineyard !

The Unreal Deal Vineyard
-----------
Unreal Engine 4.9 – The Legend of Zelda: Ocarina of Time – Dark Young Link DX12 Tech Demo Download ! (Yes this one is made for DX12

MEGA Download - ZELDA true DX12 Tech Demo

================================================== ==========

Also, constantly updated YT Channel ->

Games, Gameplays, Trailers, News, Engines, New Tech and more

Graphics FX, Games Engines and more

NEW Games DX9 DX11 DX12 OGL Vulcan etc.

================================================== ===========
Also on My BLOG there's lot's of interesting Sketches, Graphics, Game Screens from RP+ Sweet ;-) and More :

My BLOG in Tha' teNET

Sony Tokyo Game Show 2015 conference live report

Here -> https://www.youtube.com/watch?v=R0P6...FBsuY9&index=1

E3 Full Conferences and highlights and more

Here ->
http://loccothan.blogspot.com/p/e3-2015.html

================================================== ========================
3. Fine Utilise Power of RadeonPRO

Here is Topic for other Radeon users to Fine Utilise Power of RadeonPRO software

Pro TIP for Windows_X x64 Users:

Please go into RadeonPRO main Folder and make sure that every .EXE file in it has: Run as Administrator

And don't worry about RP warning at Start, just click Yes !
Always run Games from RadeonPRO Launch option !


-> http://www.radeonpro.info/

-> http://forum.radeonpro.info/general-topics-10

MODS for RP 1.1 or 1.1 beta SweetFX 1.51 with Main.H code Tweak for RP

-> https://mega.co.nz/#F!oIcV3ZTA!DVoz5DPkM32A3x-lvHmdZg
Files You'll need are in FOLDER/Zz Gamers Soft You NEED

Other MODS (with working links uff ) --> My BLOG
You got here: MEGA, MediaFire and ONE drive

NEW !!
Reshade 1.1 with SweetFX 2.0b + Shaders by Ioxa (High-Pass Sharpening & High-Pass Contrast Enhancement)
Download Here -> ReShade 1.1.0 with SweetFX 2.0b
================================================== ===========
UPD. May 1 .15
For leazy One's

SweetFX settings 1.5.1 -> https://mega.co.nz/#F!NQsU1JqK!HkR9LBLqLWRwhO7ROQMs5g

SweetFX 2.0 reShade settings -> https://mega.co.nz/#F!0IFjjSTS!3f9W2AyhnMOImeBPszFL5w

================================================== =========================
4. RADEON Tweaking Section:

================================================== =========================

The Registry Tweaking Guide for Radeon GPU's !

Open Regedit (click Run and enter: regedit ) Find Driver section:

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\{4d36e968-e325-11ce-bfc1-08002be10318}\0000]

Interesting Features/Options Highlight:

Shortcut NA means not avaible/selectable so the NA=0 means is Avaible !
and dword:00000000 ( last digit 0 is OFF and 1 is ON dword:00000001)
Please reboot/restart driver after Tweaking !
--------------------------------------------------------------------------------------------------
"GI_NA"="0" (ability to turn OFF Geometry Instancing, Avaible in Task CAT Icon only! )

"AreaAniso_NA"="0" (turns On better Aniso Filtering, also more demanding and looks better, Avaible in Task CAT Icon only!)

"AAF_NA"="0" (turns ON more AA Options, Avaible in Task CAT Icon only!)

AntiAlias_NA (gives Options in Tray/CAT for more AA options)

"EQAA_NA"="0" (Enchanced Quality Mode for AA, More demanding, avaible in CAT AA dropdown )

"TemporalAAMultiplier_NA"="0" (Yet another usefull AA menagment, you can go to 32xAA ! )

"MLF_NA"="0" (ON/OFF Morphological AA in CAT)

"Gamma_NA"="0" (Set Gamma in Movies/Games ?)

"SurfaceFormatReplacements_NA"="0" (in CAT you can turn ON/OFF the Texture compresion Format for the Favour of Radeon GPU's, I have ON, something wrong with Textures try OFF ;-) )

TFQ_NA (texture Filtering Quality -> gives Option in Tray for Aniso Quality if OFF/0)

"TextureLod_NA"="0" (Turns ON ability to Crank Up textures renderig Quality to VeryHigh, default in Drivers ON)

"CameraShakeMotionDetect_NA"="1" (CAT Video Section related)

"EnableUlps"=dword:00000001 (It means GPU will save Power 300/150 for Desktop or Web crusing ;-) )

"KMD_EnableLPT"=dword:00000000 (Kernel mode setting, see Wiki, I think its for Older GPU's Reg entrie, For GCN it's Obsolete)

"3D_Refresh_Rate_Override_DEF"=dword:00000000 (Refresh overide ON/OFF so 00 is OFF and 01 is ON, change only last digit ! )

"Display_Detection_DEF"=dword:00000000
"Panning_Mode_DEF"=dword:00000000
"Force_TV_Detection_DEF"=dword:00000000 (no need for Guide here ;-) )

"ACE"=hex:31,00 (ACE is ON if you wanna OFF change to 30,00)

"KMD_FRTEnabled"=dword:00000001 (Frame Rate limiTer FRT Enabled )

"KMD_MaxFrameRateRequested"=dword:0000003d (here is my 61FPS, you can set whatever you'll need 30,120,144 etc. Remember it's HEX value!)

"VgaCompatible"=dword:00000000 (OLD Games don't work? turn that baby ON, along with: Legacy Components/DirectPlay in Windows Features )

"Adaptive De-interlacing"=dword:00000001 (is ON Feasibility of real-time applications is given as well as the coding efficiency tested by the Audio Video coding Standard (AVS) Great and New Technique for De-interlacing Videos)

"VPE Adaptive De-interlacing"=dword:00000001 (is ON Analog filter adaptation using a dithered linear search algorithm, another Great and New Technique for De-interlacing Videos)

StaticGamma_NA (Static Gamma for Movies)

"ASTT_NA"="1" (Adaptive Sampled Transparent Textures, AA on textures with transparency which did not have proper 8bit alpha)

"DALNonStandardModesBCD1" and "DALNonStandardModesBCD2" (basicly you can enter here your desired Resolution with Refresh rate, it is Default for Games etc. - my example: 17,92,13,44,00,00,00,90 it means: 1972:1344 in 90Hz)

"EnableLBPWSupport"=dword:00000000 (?)

"PP_MCLKStutterModeThreshold"=dword:00030000 (GPU to Monitor Delay Times in ms, We don't know too much about it but feel free to experiment, Try 15000/7500/5000/3000/2000 or for 1ms LCD 1000)
"StutterMode"=dword:00000002 (This is Stutter Mode Switch, avaible Options are: 0,1,2 - 0 means OFF)

"KD_TilingMode"=dword:00000000 (I think is Old School Tiling Texture Mode, default is OFF for GCN )

"AdapterDesc"="AMD Radeon R9 200 Series"

"ColourDesktopGamma_DEF"="1.0 1.0 1.0" (this is for Desktop + Movies Playback Calibrations)
"ColourDesktopBrightness_DEF"="0 0 0"
"ColourDesktopContrast_DEF"="1.0 1.0 1.0"

"ColourFullscreenGamma_DEF"="1.0 1.0 1.0" (this one is for Fullscreen Colour etc. Calibrations e.g. For My CRT i have 1.2 Gamma)
"ColourFullscreenBrightness_DEF"="0 0 0"
"ColourFullscreenContrast_DEF"="1.0 1.0 1.0"

"Display_Detection_DEF"=dword:00000000 (Monitor Detection Switch 1/0 ON/OFF )
"EdidPersistenceIsOn"=hex:00 (EDID Monitor Persistence Override)

"Panning_Mode_DEF"=dword:00000000 (Panning mode on Monitor switch 1/0 ON/OFF )


! Great Tweak -> in Radeon Reg. Tweak now avaible:

"DisableDMACopy"=dword:00000001 ( is not Direct Memory Access! IMO, is a GPU to VRAM related Tweak - It's Safe Approach to give 0 keep it enable. You have to test it in 1 and see what's best for You, some people including me have FPS Gain in Desabled State - Crysis3, BF4, HoM&M VII)

"DisableBlockWrite"=dword:00000000 ( Result in faster writing of graphics information to the VRAM, You can Enable it in GCN 1 or 0 )

Another Great Tweak for Dx9 Games FPS Boost (you'll have to put this in TXT.REG and merge, I've e-mail this to our coder so it will be in RadeonMOD):

"KMD_APlusISharedMiniSegmentSize"=dword:0x4
"KMD_APlusISharedMiniSegmentOptions"=dword:0x7

================================================== ========================
And Now another section the UMD ->

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\{4d36e968-e325-11ce-bfc1-08002be10318}\0000\UMD]

"GI_DEF"="1" (DEF means Definition and is basicly for ON=1 or OFF=0 and sometimes you can set there 2,3,4 )

"Main3D"=hex:33,00 (Main3D - Filp Queue Size. Render Frames ahead, default option is 3 Frames Ahead, always set like this: 30,00 - 35,00 etc and see Next)

"Main3D_DEF"="3" (Must be set like above. Avaible switches: 0,1,2,3,4,5)

"AreaAniso_DEF"="0" ( Follow above rule eg. 0 = App. controled, 2,4,8,16 Forced Mode)

"AnisoType"=hex:30,00 (it means is App. controled, we can lower it for FPS boost but we will have lower Image Quality: 32,00-31,36 )

"AnisoDegree"=hex:30,00 (it means is App. controlled, 30,00=App controlled 32,00=2x 34,00 =4x 38,00=8x 31,36=16x for MAX Image Quality)

"AnisoDegree_DEF"="0" (AF: 1=2x, 2=4x, 3=8x, 4=16x / 0=App controlled )

"TextureOpt"=hex:30,00 (give 31,00 No Visible Quality loss but increase in FPS and further Texture drawing/See down)

"TextureOpt_DEF"="0" (is Texture Optimisation Tweak, 1 for ON)

"TextureLod"=hex:30,00 (Texture Level of Detail switch 31,00 means ON, 30,00 Default REG State)

"TextureLod_DEF"="-1" (Texture Level of Detail switch, You can give sharp to blurry, for More sharp give: -1 for blurry: 1)

"TruformMode_DEF"="0" (OLD trueform is OFF the Teselation predecessor, You can turn it ON for eg. in NWN2 and games that support it, more in Wikipedia Truform Section)

"VSyncControl_DEF"="1" (You can change here for 2,3,4 | 3 is for Dynamic and 4 is for Lock to monitor, You have to try and see)

"AAF_Mapping_SET"="0(Standard:2,Edge-detect:12) 2(Standard:2) 4(Standard:4,Edge-detect:12) 8(Standard:8,Edge-detect:24) 16(Standard:16)"

"AAF_Value_SET"="Standard:0,Edge-detect:3"

"ATMS"=hex:2d,00,33,00 (The Adaptive AA filter setting. Default value is 31,00 (Smooth +1). All values: Smooth 30 00, +1 Smooth 31 00, +2 Smooth 32 00, +3 Smooth (Sharp) 33 00.)

"ATMS_DEF"="3" (same as above but numeric values)

"EQAA_DEF"="0"

"EQAAMapping_SET"="0(0:0,1:0) 2(0:2,1:2) 4(0:4,1:4) 8(0:8,1:8,2:16)"

"TemporalAAMultiplier_DEF"="0" (0,1,2,3 is Mode xAA means 3 is x8 Temporal so it's 32AA)

"ExportCompressedTex_DEF"="1" (Texture compresion Format for the Favour of Radeon GPU's)

"PixelCenter"=hex:30,00 ( Pixel Center On/OFF switch)

"PixelCenter_DEF"="0" (old ATI Tray Tweak - alternate Pixel center Tweak )

"EnableTripleBuffering_DEF"="0" (1 or 0 )

"DitherAlpha_NA"=hex:31,00 (here is HEX 31,00 means ON/1 and 30,00 means OFF/0 )

"ZFormats_NA"=hex:31,00 (here is HEX 31,00 means ON/1 and 30,00 means OFF/0, Z Stencil Format 16/24/32 Bits )

"ForceZBufferDepth_DEF"="0" (old ATI Tray Tweak, 0 default means 32Bit, 1=16Bit and 2=24Bit)

"TemporalAAMultiplier_NA"=hex:30,00 (here is HEX 31,00 means ON/1 and 30,00 means OFF/0 )

"CatalystAI"=hex:31,00 (Radeon AI Texture Filtering switch)

"CatalystAI_DEF"="1" (1 means AI is ON for OFF put 0 and in above option put hex:30,00 it's a Good Tweak for Benchmarking )

"Tessellation_OPTION"=hex:30,00 (Give your Value for Tesselation Override, usefull for FPS Gains with no Hudge Quality Impact = 32/24/16/8 Best for Q is 32)

"GI"=hex:31,00 (Geometry Instancing is ON)

"EnableCrossfireForNonProfileApps_DEF"="0" (Try enabling This for better CF)

"EnableCrossfireForNonProfileApps"="0" (this and upper must be set to 1)

Pro TIP:
You can easily Export the 0000 and UMD section to file and Edit Preffered Options so next Time when driver change you can just Import Desired Tweaks into registry !
Ofcourse you'll have to Cut all besides desired Options,
Open it in Notepad/Notepad++ and Edit ;-)

================================================== ==============================
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\{4d36e968-e325-11ce-bfc1-08002be10318}\0000\UMD\DXVA]

"DXVA_WMV"=hex:30,00 (Radeon Video H/W Acceleration ON/OFF)

"WhiteBalanceCorrection_DEF"="1"

3to2Pulldown_NA (https://en.wikipedia.org/wiki/Three-two_pull_down)
"3to2Pulldown"=hex:31,00,00,00
"3to2Pulldown_DEF"="1"

"CameraShake_ENABLE_DEF"="0"

"InternetVideo"=hex:31,00,00,00 (ON for YouTube etc. H/W decoding)

AutoColorDepthReduction_NA (Depth reduction to 24bit enabled, Movies Only)

TheaterMode_NA (turns ON Theater Mode in CAT for dual monitor and more users)

Panning_Mode_DEF (Panning mode for resolution limited displays, use in HDTV)

================================================== =========================

Some Tweaks if you have CRT Monitor, you can disable in Registry some values (5-12FPS gain here) ->

PP_MCLKStutterModeThreshold = 1000 (4096) or even less
and:
StutterMode = 0

I have:
PP_MCLKStutterModeThreshold = 0
StutterMode = 0
========================================
How to fix clock throttling in Reg. Radeon Software for ATI GPU's !

Search for TFQ_NA in Regedit.
This will take you to a folder:
HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control\Cl ass\{4d36e968-e325-11ce-bfc1-08002be10318}\0000.
Inside the 0000 folder, you'll see lots of registry keys like "RadeonSoftwareEdition." If you do, you're in the right place!

Add a new DWORD 32-bit key in the 0000 folder and name it:
PP_AllGraphicLevel_DownHyst

Set the value data to decimal 20.
Reboot.

//EDIT: You can also add these DWORD 32-bit keys, as they may also help resolve the issue. This will emulate Catalyst 15.11 behavior.

PP_ActivityTarget (value data 30 decimal)
PP_AllGraphicLevel_UpHyst (value data 0 decimal)
PP_AllGraphicLevel_DownHyst (value data 100 decimal) Note that this replaces step 2+3 above

PP stands for PowerPlay
DownHyst stands for Downclock Hysteresis

(note from me: another Hysteries is in BIOS eg. Temp Hysteresis, applied to GPU Fans ;-))
================================================== =========================

CrossFire in Every Game !

Download RadeonPro and create a that Game profile.
Force the crossfire profile 'AFR Friendly D3D' and set the MVPUMode to 'Alternate Frame Rendering'.
then Force in RP desired FPS eg. 60/120/144 etc.
And its Done

Also in MSI AFTERBURNER !
CLICK SETTINGS GEAR (COG)
THEN FIRST PAGE -> General Tab
LAST HEADER AT THE BOTTOM -> AMD compatibility properties
Unofficial overclocking mode -> DROP-DOWN BOX -> without PowerPlay support

It makes difference for Fury X (and x2)

Please you try and see games FPS for results (appearance of smoothness)

Kudos goes to Flano
================================================== =========================

5. Usefull Utilities

Can Just somebody Program some Tweak Utility with that Options like in RP or ATI Tray?
Just Hook it into Registry !
UPD! OK We have the Coder Now -> theoneofgod

And here you have some insight into Tweaks i Have (as I said before, some are in Tray and some in CAT main Window)

 Click to show spoiler



Also great Free Monitor Utility CRU
Custom Resolution Utility (CRU) allows custom resolutions to be defined for both AMD/ATI and NVIDIA GPUs by creating EDID overrides directly in the registry without dealing with .inf files.

Custom-Resolution-Utility-CRU

Also Power User -> theoneofgod started making the Radeon Registry Utility !
First AMD_Registry_Editor_v0.0.1 and Now
We Have ver. 1.0.11 !

Be sure to backup your registry first by going to File and then Backup Registry.

Black options exist already and can be edited.
Red don't exist, but will be added when edited.




AMD_Registry_Editor Thread in Guru3D


Grab it here - Main Guru3D Download Section

"Right click individual key names to set new value, set default value. I've added help there too using bits of information gathered by OnnA."

The New Radeon Tweak is Up ! Now ver. 1.0.11
Coder: theoneofgod
Main Support, GPU + Tweaking Knowledge: OnnA Ne01_LoccOtHaN

AMD_RadeonMod 1.0.11

Please share you're opinions about it.

================================================== ==========================

Here interesting Tweak i make with Legacy MOD FLEM (Ver 2.0) ->

Download here !
http://digitalflem.mydiscussion.net/



We can Disable DMAcopy 1 (experiment with that Tweak)
EnableBlockWrite = 1 (Result in faster writing of graphics information to the VRAM, from my observation ex. in UE3,4 is faster in Textures Drawing on Screen ! no more poping up delayed Textures, so turn it ON )

UPD.1
The Tweaks are working OK and there's a small boost in Low side FPS ! Tweak IT and Test it

All Tweaks now Avaible in AMD_Registry_Editor_0.0.6 !

And in Shadow Of Mordor Ultra/High with Ultra Textures i have:

-> Now 54FPS average and 40FPS Low
-> before 52FPS average and 29FPS Low

So we have first Great Tweak for GCN using FLEM -> THX goes to Creators !

================================================== ===========

6. Optimal online gaming experience Tweaks

If you want the optimal online gaming experience, go to Advanced tab of your Ethernet adapter settings, and disable the following:

* Interrupt Moderation - clumps packets together and sends them as a batch - the main offender
* Flow Control - sounds counterintuitive to disable it, but it messes with existing flow control in Windows networking stack
* Receive Side Scaling - also messes with Windows networking stack
* [anything goes here] Checksum Offload - supposed to speed up performance by offloading TCP/UDP checksumming to hardware; in reality does nothing for an average desktop PC except interfere with Windows networking stack
* Green Ethernet - performance-eating eco garbage

Try it and see -> more headshots in your favorite FPS, responsive gaming, less disconected issues etc etc.

Also, if you play a MMORPG and want faster responsiveness, you need to disable TCP/IP Nagle algorithm in Windows. There are multiple guides about it though.

-------------------
GodMode in Win_X let you customize every aspect of you'r Window's.
Generally it's for Power Users or People with solid background knowledge of that OS.

Create a new folder on your desktop: right-click on Windows 10 desktop and on the context menu, click on New > Folder.
Name this newly created folder:
GodMode.{ED7BA470-8E54-465E-825C-99712043E01C}

Enter that folder and..... everything you need is here :-)
================================================== ===========
7. WinX & Win8 Tweaks.

Windows 10: How to Protect Your Privacy and thanks to that Tweaks -> Free ~150-300MB in RAM and Net Speed/Ping
We Are Gamers we need every posible resources we can get ;-)


Stop Bone Collector ;-) (telemetry and Data Collection in Windows 10 )
Command Prompt/Power Shell as Admin

sc config DiagTrack start= disabled
sc config dmwappushservice start= disabledsc
stop DiagTracksc
stop dmwappushservice

run Gpedit.msc
>Administrative Templates>Windows Components> Data Collection and preview builds>allow telemetry

Set to Enabled/Disabled
1. Enabled (togle user control....)
2. Disabled
3. Default (as it is)

Atomated Scripts (THX goes to Sergey Tkachenko and Wade )

Also we can remove all Apps bundled with Win_X and leave Store and Calculator working (you can edit script in notepad ;-)
Here -> https://mega.nz/#!tV8nAayD!FTDAMIlgQ...pVABFKcQYj2mNE

Run As Admin or Paste to Comm.Prompt as admin

Automated script to Permanently STOP Telemetry and Data Collection + Some related Net Tweaks also
Here -> https://mega.nz/#!EcFDyAAb!RFkt1_V0k...3Sh4rqjSpfTxbM

Also after Sign-in into M.S Account and Win_X Activation Process you can Log-in into Local Account.

Important -> Make Sys BackUp (You can Revert to previous state ;-)

Update 1

Now i can clearly show you better option (less invasive and Win_X works as usual with some boost ;-)

run Gpedit.msc
>Administrative Templates>Windows Components> Data Collection and preview builds>allow telemetry
and here change only second option (give disabled)

Next:

HKLM\SOFTWARE\Policies\Microsoft\Windows\
Here create Key
DataCollection
and give Dword32 Value:
AllowTelemetry and write 0 (means Disabled)

Clear the log located in “C:\ProgramData\Microsoft\Diagnosis\ETLLogsAutoLog ger”

Remove both Tele. services:

Disable: Set the “Start” registry key for both services to 4 (Disabled) [3 is Manual, 1 & 2 Auto]
Located at “HKEY_LOCAL_MACHINESYSTEM\CurrentControlSet\Servic es”
1. diagnosticshub.standardcollector.service
2. DiagTrack

And of course You can just Export particular Reg Key ;-) If you don't need Tweak, just Import that Reg

PS. Also in that Logs (we can Open it using HexEditor ;-) I've noticed that MS don't collect any of Private Info about User !!!
All in there (You can check by yourself) is related to Windows and Drivers etc. eg. SB-Z, Razer and so on...
So i think it's little misunderstanding So called Data Private Collection (security concerns etc.)
But in BF4 multi I got 6-8 PING Gain !!! -> Yeah

Now Windows Update should work as intended
And we have freed some resources and Ping
Also in Settings/Updates/Advanced Options Change how Upd. are delivered to Only My PC (not in Network, that option will seed updates to others as well -> You can Keep it or Disable it)

Win_X Block/Unblock Updates -> Total control of Update Delivery (if you don't need some of'em, just Turn it OFF )

Here link for MpS Hide/Show Updates:

https://mega.nz/#!cBlgwLQT!GI5jed3Iy...N2SbWe1pwYDi1I

Another usefull Tweak to turn OFF Net Usage associated with Win Telemetry
Please add following to the HOSTS ( C:\Windows\System32\drivers\etc )
After That you will Have much Better PING and Net Responsivness. (After the Tweak i have +6-10 Ping in BF4 Multi )

Head here and download this Tweak -> SDCutTheLine
================================================== ===========

And Turn ON/OFF HPET:
bcdedit /set useplatformclock true
bcdedit /set tscsyncpolicy Enhanced
bcdedit /set disabledynamictick yes

bcdedit /deletevalue useplatformclock
bcdedit /deletevalue tscsyncpolicy
bcdedit /deletevalue disabledynamictick

To view bcdedit settings:
bcdedit /enum
================================================== ===========

Memory Management Tweaks that really do something usefull

Here is my registry (you can copt text into notepad, name it and give ext. .REG and Merge into registry (safe when you have 16GB RAM if not then calculate from Real RAM ammount you have in PC)

Your RAM MB* 1024 * 0.125 *2 = ??

Windows Registry Editor Version 5.00

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Session Manager\Memory Management]
"ClearPageFileAtShutdown"=dword:00000000
"DisablePagingExecutive"=dword:00000001
"LargeSystemCache"=dword:00000000
"NonPagedPoolQuota"=dword:00000000
"NonPagedPoolSize"=dword:00000000
"PagedPoolQuota"=dword:00000000
"PagedPoolSize"=dword:00000000
"SessionPoolSize"=dword:00000080
"SessionViewSize"=dword:00000060
"SystemPages"=dword:00000000
"PhysicalAddressExtension"=dword:00000001
"PagingFiles"=hex(7):7a,00,3a,00,5c,00,70,00,61,00 ,67,00,65,00,66,00,69,00,6c,\
00,65,00,2e,00,73,00,79,00,73,00,20,00,31,00,30,00 ,32,00,34,00,20,00,33,00,\
30,00,37,00,32,00,00,00,00,00
"SecondLevelDataCache"=dword:00000c00
"IoPageLockLimit"=dword:0040e100 (Here HEX.Dword Value for: 8GB= 100000, 16GB= 7cf83000 but always write Dicimal and then change in HEX in REG it will convert Automatically)
"ExistingPageFiles"=hex(7):5c,00,3f,00,3f,00,5c,00 ,5a,00,3a,00,5c,00,70,00,61,\
00,67,00,65,00,66,00,69,00,6c,00,65,00,2e,00,73,00 ,79,00,73,00,00,00,00,00

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Session Manager\Memory Management\PrefetchParameters]
"BootId"=dword:00000067
"BaseTime"=dword:1ac6a4f7
"EnableSuperfetch"=dword:00000003
"SfTracingState"=dword:00000001
"EnablePrefetcher"=dword:00000003
================================================== ==========================
8. CPU Tweaks AMD/Intel

I will update More Tweaks for Win 8.1, SB-z, SB-Xfi x8 FX etc..
Especially for Phenom II and FX users to fine utilise Power of those


Also for x6 x8 etc. CPU users You'll need to unpark CPU Cores to Boost Performance in x2 x4 Games/Apps
Cuz' Still some Modern Games don't utilise more than 4 cores ! So you'll have to UnPark Them and Gain some Performance !


-> Read and Download Here ->

Disable-CPU-Core-Parking-Utility

================================================== ===========================
And now as for CPU's from AMD (the FX one with SSE new instruction set)

Using this simple and intuitive application, you can easily patch files that were compiled with the Intel Compiler for better performance

Intel Compiler Patcher is a comprehensive piece of software developed to offer you the means of tweaking certain EXE, DLL, ACM, AX, CPL and OCX by default files that were compiled using Intel C++ Compiler from your computer and optimize them for your processor by deactivating their CPU Dispatcher, thus increasing their general performance when run on other types of CPUs.

Scan your folders and choose the files you want to patch

softpedia-Intel-Compiler-Patcher

================================================== ===========================
PhenomII and FX series CPU's will have a little OC touch to Gain some Hidden Performance:
ALways set FSB to min 232-250 (look on the RAM and tweak it too) or if you have Great Mobo give it a try and set >260FSB to 300 !!
It will unlock CPU some GT/s (gigatransfers per second) also the wider the better !


TIP for Beginers:
Try to set Auto OC in you'r Mobo BIOS and see the values + MeM Timings for proper Manual Tweak.
It will Give You the Idea of what you'r RIG is capable of.

Next TIP:

Phenom II series ->
NB always 2.7-2.8GHz no less ! (important for Memory bandwidth, don't exceed 3.0 GHz )
HT always 2.3GHz to 2.6GHz (important for GPU's + CPU to RAM operations)

PhenomII x6 -> OC to MAX 4.2GHz (no need for More)
Sweet spot is 3.8GHz-4.1Ghz
PhenomII x4 -> OC to MAX 4.5GHz (no need for More)
Sweet spot is 4.1Ghz-4.3GHz

My PhenomII x6 1100t BE on Sabertooth 990FX for Gaming
ASUS TurboEVO (All you have to do in Windows, BIOS is set 248FSB 3.6GHz)
 Click to show spoiler


================================================== =====================
FX series ->
NB always 2.6GHz-2.7GHz but no more ! (important for Memory bandwidth )
HT always min. 2.6GHz-2.8GHz (important for GPU's)

FX x6 OC to MAX 4.5GHz (no need for More)
Sweet spot is 4.2GHz
FX x8 OC to MAX 5GHz (no need for More)
Sweet spot is 4.2GHz-4.5GHz

Also remember to rise a little V on NB,HT etc. in BIOS
Warning AMD ! You'll need Good CPU Cooler (not BOX!)

================================================== ========================
Also in BIOS Turn OFF HPET or in Win 7/8.1
1. Go to Device manager and expand the "System Devices" section.
2. Look for High Precision Event Timer. Right click on it and click disable.
It will give you some more Procesing Power to Games (more FPS)/Apps (faster)

It's the same Gain for AMD or Intel CPU's !
================================================== ========================
Now Intel CPU's:

Always give some OC to it
SB i5/i7 give 4.2-4.8GHz
IB/Haswell give MAX 4.4GHz
Extreme i7 x6 give MAX 4.2GHz to 4.4GHz (no need for more)
Extreme i7 x8 give MAX 4.0GHz-4.2GHz (no need for more)

Warning Intel ! You'll need Good CPU Cooler (not BOX!)
Also rise a little CPU Vcore for Stability !
Tweak some PLL also
Temps should be around 68-75 deg.cels. MAX (its safe here)

Of course the MAX is the MAX !
================================================== ===================
9. Games Deals, Keyshops Codes etc.

G2A MarketPlace

Codes for 5% discount: ALLKEYSHOP , FRAGS
and for 3%: LOWCY , IAM-BACK

Try the Big Sells like PayPal etc. these more reliable and keys are 100% valid.

================================================== ===================
Great Game Deals ->
__________________________________________________ _______________
Play More Pay Less The KinGuin Net:

KinGuin Net

Promo code: LOWCYGIER or imback or 5% less with code: sup5%ADgr90876

Last edited by OnnA; 05-18-2017 at 18:57.
   
Reply With Quote
 
Old
  (#2)
Deathchild
Ancient Guru
 
Deathchild's Avatar
 
Videocard: -
Processor: -
Mainboard: -
Memory: -
Soundcard: -
PSU: -
Default 04-17-2015, 08:09 | posts: 3,968 | Location: Estonia

Could you show some pics of your Sweetfx GTA V? Wanna see that.
   
Reply With Quote
Games Performance Tips & Tweaks
Old
  (#3)
OnnA
Ancient Guru
 
OnnA's Avatar
 
Videocard: Nitro Fiji-X HBM 1150/570
Processor: ZEN x8 k17 + Nepton 280L
Mainboard: ASUS Crosshair VI Hero
Memory: 16GB 3200 CL16 1T Ripjaws
Soundcard: SB-z Nichicon + Wood 5.1
PSU: Seasonic-X 750W Platinum
Lightbulb Games Performance Tips & Tweaks - 04-17-2015, 12:54 | posts: 2,766 | Location: HolyWater Village

Easy dual analog JoyPad emulation for Games that require Xbox360 controller

All files extract to Folder JoyPad EMU (will be easy to find, and make shortcut for easy access)

1) Download and extract the files in Xoutput. XOutput/releases

2) You don't need to install the Xbox Controller driver if you are using Windows 10.

3) You run the ScpDriver.exe file and press "Install" when asked. ScpDriver for DS3

4) Run XOutput.exe, configure your controllers. When you're ready, press "Start".

I will update soon with screens.

Default X360 Joy on my DualShock 2 (PS2 Joypad)

 Click to show spoiler



And here is my settings for Forza APEX (in Game set profile with left analog steering & right analog acceleration/brake)

 Click to show spoiler



Made by our user Fox2232 the BIOS Mods for Radeon GPUs -> The Fiji MOD with enchanced HBM capablility!

And if anyone with Fury X want my OC vBIOS. I can provide it.

Fiji Fury-X MOD BIOS download
I made it month ago. So, it is fully tested. (based on newest official vBIOS from AMD)

Made few sensible changes:
HBM OC limit 600MHz (+20% from 500MHz base)
HBM Voltage: Unchanged as even +50mV did not improve OC by 5MHz (people who made it to 600MHz+ usually did Hard Mod to capacitors)
GPU OC limit 1260MHz (+20% from 1050MHz base; 2000MHz limit looked too stupid to me on Fiji, maybe Vega)
GPU Voltage: +18.75mV as higher may lead to Power Limit Throttling
Power Limit: Bumped by 20% internally t support OC without decreasing performance as clock goes UP.

Could not find OverDrive +50% Power limit to decrease it to +25%, So for safety, do not put Software controlled limit over 25%.
(But from my testing, card refuses to draw more than 350W anyway, so VRMs which can do 450W+ are safe.)

So, it is not big modification, just little one making sense.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Notice:
I made dozens of custom voltage bioses for Fury X. This one above is optimal for me. Maybe someone will get higher GPU OC with higher voltage.

HBM observation:
Higher Voltage does not improve OC without HW Modification of card. Lower voltage does decrease OC potential. But even -50mV (1250mV instead of stock 1300mV will get HBM to stock 500MHz).
There is no reason to undervolt HBM for power efficiency as it eats less 18W at stock. And less than 25W even with bumped voltage and maximum stable OC.

GPU OC observation:
Card does not want to go much over 300W even with vBIOS modification for all power stages. So, voltage bump over +50mV is usually not good idea.

Where did it land my Fury X? Nothing extra: 1135/570MHz (No throttling.)
Passed all tests. I like GPUPI test as well, since single wrong calculation or memory R/W and it will tell you.

================================================== ======================
Active adapters for Old Monitors (ability to plug new GPU into Old Monitor)

You need to search for Most Advanced One tho !
its around 19-29€

Like this:
----------
- Internal cable wires made of silver-plated oxygen-free copper technology
- Ultra Pro OFC 99.999%, with addition of precious metal alloys
- Digital transmission - 0% quality loss
- Overvoltage protection
- Class "A"
- 100% 3x shielded cables
- NO INTERFERENCE !
- EDID functionality

- It supports the highest speed in technology FULL HD, can support resolutions higher than Full HD (1080p)
- Supports increased color depth: Deep Color 48bit, xvYCC and xvColor
- Supports technology ARC and ACE the ability to transmit sound without additional cables.

- Robust and flexible external insulation
- Has the quality certificate ISO 9001: 2000
- Conductor cable with a cross-section of more than 24AWG!
- Perfect support 3D signal
- ISO 9001:2000 CE and RoHS.
- Supports high refresh rates (up to 800MHz)
- Transfer the image to 48bit (greatly expanded the number of colors in comparison to the RGB)

Full support technologies:
Blu-ray / HD DVD, TrueHD, DTS-HD, DVD-A, SACD (DSD)

The cable supports the latest standards for audio streaming and audio formats:
Dolby TrueHD, Dolby Digital 5.1 and DTS-HD Master Audio ™

And for Perfect Image you'll need also Hi Quality Monitor Cable (mine has the thickness of a little finger !)
It's mainly for design and layout for print and digital content publishing.

================================================== ======================
CRU (Custom Resolution Utility) Tips, Tricks and Monitors OC (LCD/LED/CRT)

CRU is made by ToastyX -> Here you have CRU Main Forum (also you get all support there)
Forum-Monitors-Video-Cards

1. OC your Monitor

Run CRU as Admin !
Here is New CRU Beta -> CRU-1.2.99-p2

Then Set your desired Resolutions + Refresh rates
Here is my Settings for CRT Diamond PRO 2070SB

 Click to show spoiler


TIP -> If something goes wrong go into Windows Safe Mode and Hit Reset-ALL in CRU directory !
TIP -> Its always good to have some Vendor Specs for your Monitor (google it) to know what H/V Refresh rates it supporting.

TIP for 1080p LED/LCD users, you can set Refresh Rate 75Hz and/or Custom Resolution:
2200x1125 total, 148.50 MHz pixel clock / 148.5 MHz 2200 x 1125 @ 60.00Hz

Here you Have -> Pixelclock calculator

Also is good to see what resolutions or refresh rates work for your Monitor by setting Custom Resolution in CCC !

2. Enable Freesync for your Monitor
(GPU will have to support it, but you can try to Enable it even if it's not, maby it will work)
In CRU Edit Extensions Blocks and Add Freesync Range.

Here the AMD freesync Demo to test your settings -> AMD_FreeSync_Demo_0_9_1_setup

Pro TIP for Freesync Monitors Users -> Here you CAN adjust Freesync Ranges easily e.g. from 45-75 to 33-75

Like always look into Monitor Specs and H/V (Horizontal/Vertical) Reresh ranges and set this in here:

 Click to show spoiler


TIP:
for any of this Tweaks you need to have ATI .dlls Patched by
-> AMD/ATI Pixel Clock Patcher

Also you can Play with some HDMI settings (if you have HDMI Plug-in LED)
TIP -> Don't set Bit Depth beyound Monitor Spec cuz' you'll have Black Screen Log-in (Run in Safe Mode and Hit Reset-ALL in CRU)

 Click to show spoiler


TIP for CRT Users -> Freesync Working as intended but only in 56-120 Range Mode ! (you can test also in 50-120 range but Freesync is based on VESA Monitor standard so in my CRT lowest Refresh is 56Hz, thats why it is working only in 56-120 (and more) range ! UPD. Demo runs OK in 56-120 but FC4 not, so only good setting for my CRT is 60-120 !

Also is good to read you Monitor PDF Manual, this is point of interest:
--
Horizontal scan range
30 kHz to 83 kHz (automatic) Try from 33-35 (and go Up in 5Hz steps, always restart after change + Run CRU as Admin)
Vertical scan range
50 Hz to 76 Hz (automatic) Give Max 75
(When you OC you refresh rates for Monitor you Pick lower number from H or V Highest in this e.g. it will be Safe 75Hz becouse Vertical Highest is 76Hz)
Optimal preset resolution
1920 x 1080 at 60 Hz
Highest preset resolution
1920 x 1080 at 60 Hz
===========
Next is good to have GPU to monitor connected by Display Port (it has Higher Bandwidth, this is Important factor for FS)
Next if you have HDMI, try to OC your TDMS clock to 660MHz in CRU-> HDMI)

Some setups needs to be Pluged by Display Port.
Last TIP -> Always restart you computer to reflect changes !
================================================== ======================
Games Performance and Hi-Quality Tips & Tweaks

Table of Contents:

1. Assassins Creed Unity
2. Grand Theft Auto V
3. pCARS for Radeon/nU Guide
4. Alien: Isolation Insane Quality! MOD
5. Might & Magic: Heroes VII
6. Fallout 4
7. Wolfenstein The New Order/Wolfenstein The Old Blood and New DOOM
8. FrostBite Engine Games: BF:4, BF:H, SW:BF, NFS etc.
9. The Witcher 3
10. Batman AK


[1] Assassins Creed Unity Performance Tips & Tweaks

The AC:U Ini file:

DisplayWidth=1792
DisplayHeight=1344
RefreshRate=85
WindowMode=2
VSync=0
Stretching=0
EnvironmentQuality=3 (3 is Very High)
TextureQuality=3 (2 is Ultra)
ShadowQuality=0 (its Low)
SSAO=2
Bloom=1
AntiAliasingMode=0
Tessellation=1 (it's advanced Tesselation, work properly With HBAO+ Only)

First for Radeon users -> Run RadeonPRO with Admin and AC:U also change to run as admin (for Stability, no crashes or bugs)
Set for LCD dynamic framerate control to eg. 60Hz/120Hz/144Hz how much your LCD can. +2 so it will be 62/122/146 -> Untick Vsync in AC:U
Next set your SweetFX etc.

As for nV players do the same in nV CP -> set desired LCD refresh=FPS +2 and its done.

Due to very hot summer, i have my XFX on 1050/1550 1.175v +8%POW now! (60-64 degrees celsius after 5-8h !)
My settings when playing AC:U -> Res: 1792:1344 85Hz All Ultra High with HBAO+ but Shadows is Low (max recomended is Medium) and Details are on Very High (also recomended)
Disable AA in Game and Use SMAA inject in RP (my SMAA is in the screenshot of RP below)
Also for some FPS gain make it use x32 or x48 tesselation instead x64/x128

Also some of the screens are taken when i'm playing with Options and AA SMAA in RP (0.8/16/6/12 or 0 ;-)
Also for better performance one need to disable Geometry Instancing !
in Registry -> {4d36e968-e325-11ce-bfc1-08002be10318} the 0000 string
GI_NA value name 0 (after that Tweak you'll see the GI in 3D settings but only in Task Bar ;-)
and UMD string
GI_DEF = 0 (default is 1 and you beter change that after AC:U ;-)

All you do when CCC.exe and MOM.exe is disabled in Task Manager then Log Off

In my current build i'm using AA in CAT screen below (updated)->

The GI is hard coded in CATALYST so is always ON
For The AA please use build in RP SMAA option:
Best (low Impact)
R280 and X (0.8/12/6/30, 12 or 0)
R290 and Up (0.8/16/6/25, 12, 0)

 Click to show spoiler



================================================== =================================

[2] Grand Theft Auto V Performance Tips & Tweaks

-----------------------------------------------------------------------------------------------------------
In order to Play GTA5 with RP+ SweetFX You'll need to turn off in Radeon Settings / Compatibility List / Ignore DX9,10,10.1 And game run stable !
Upd. Now im working on Reshade HD_MasterEffects with SweetFX in RadeonPRO
Upd2. Not working, Game crashes after start, i think is too much for GTA ;-)
Upd3. Working, Reshade with SweetFX 2.0 beta8 + RP but in RP disable SweetFX

Here are the screenshots in RadeonPRO + My settings in RP for GTA5

 Click to show spoiler



================================================== ==================================

[3] pCARS for Radeon Guide: Performance Tips & Tweaks

Please make sure to add command for shortcut in Stem
Right Click on Game then Properties and Set Launch Options and add:
-dx11mt -pthreads 6 (add how many cores you have eg. 4,6,8,12,16)
Upd. -dx11mt -pthreads 6 -fpscap 65 -novr

New updated Drivers and pC 3.0 changes everything. Now We can play with All MAX + Particles Low Average 55FPS -> looking nice IMO
I have Ultra/High, Low Shadows,Low Particles, no AA in game 1792:1344 85Hz Game runs OK
SMAA from Reshade.

Download Reshade + SweetFX 2.0 beta 8 and point to game + change reshade DLL for dxgi.dll (64bit)

UPD. After some Moding game runs better in x64 Mode now ! We can Play in Rain with 24 Opponents Now !

For Lazy ones Here i give You my settings for Reshade 1.9.2 (new One):
-> https://mega.co.nz/#F!AUUgTbDL!7_kpLcMn6IDfVCb9upxWtQ

Just Unpack into pCars folder in Stem. (its 64bit reshade for 64bit pCars)

UPD.2 -> I managed to optimise some files in p-CARS (make BackUp of those files before overwrite)
I tested and its min. of +6-25 FPS on GCN GPU's
UPD.3 -> Please Put Power limit on GPU to 10% or 20% (in CCC or OC soft)
Also you can save some FPS by disabling the HUD in Game.

If you have R290 or 290X you can easily turn ON Grass + Hi Smoke now.
For R28x or R270X series GPU's Turn OFF Grass to save some FPS. (For Multi)

I have to Turn OFF Grass to save some FPS cuz Low is 38FPS (i prefer 48 )
Set Priority for pcars64.exe to Above Normal or High. Run x64 always.

Remember is for Testing only (and it work for other N games No More Insane FPS drops )

Download -> https://mega.co.nz/#!NMNBzICb!oO2h06...13rfyf5waPLcKI


Here screen:

 Click to show spoiler



[4] Alien: Isolation - Performance Tips & Tweaks

Here some new ALien:I Tweaks -> Game looks incredible, tweaked + RadeonPRO & SweetFX

-> Tweaks and backup

Stay Tuned for more

================================================== ==================================

[5] Might & Magic: Heroes VII -> Game & Editor RMG Optimistaions + Tweaks !

In C:\Users\*YourName*\My Documents\My Games\Might & Magic Heroes VII\MMH7Game\Config folder you'll find

I'm playing Heroes since H1 (so i'm very Old Heroes Gamer and Big Fan)

==============================================
Some Performance/Quality Optimalisations:

MMH7Engine.ini ->

[Engine.Engine]
MaxProcBuildingLODColorTextureSize=2048
MaxProcBuildingLODLightingTextureSize=512
UseProcBuildingLODTextureCropping=False
ImageReflectionTextureSize=1024

[Core.System]
MaxOverallCacheSize=60

[TextureStreaming]
MinTextureResidentMipCount=7
PoolSize=640
MemoryMargin=80

[WinDrv.WindowsClient]
AudioDeviceClass=XAudio2.XAudio2Device (here you can try OpenAL -> AudioDeviceClass=ALAudio.ALAudioDevice )

[XAudio2.XAudio2Device]
MaxChannels=32 (here give more)
CommonAudioPoolSize=0
MinCompressedDurationGame=5
MinCompressedDurationEditor=4
LowPassFilterResonance=0.9

[ALAudio.ALAudioDevice]
MaxChannels=32 (here give more)
CommonAudioPoolSize=0
MinCompressedDurationGame=5
MinCompressedDurationEditor=4
LowPassFilterResonance=0.9
//DeviceName=Generic Software

================================================== ==========
MMH7SystemSettings.ini ->

[SystemSettings]
MotionBlur=False (i don't like Blur)
AllowRadialBlur=False
MaxShadowResolution=1120 (i suggest don't Tweak it, but feel free to try)
MaxWholeSceneDominantShadowResolution=2048 (give more=Quality or Less=Performance.)
bAllowHardwareShadowFiltering=True


There is in this section lot more (feel free to experiment)

================================================== ===========
MMH7Game.ini ->

You can Make Larger Maps + Larger Battle Maps in RMG just edit this settings:

[MMH7Game.H7EditorCombatGrid]
cMinimumCombatGridWidth=8 -> here
cMinimumCombatGridHeight=6 -> here
cMaximumCombatGridWidth=40 -> here
cMaximumCombatGridHeight=30 -> here

[MMH7Game.H7EditorAdventureGrid]
cMinimumAdventureGridWidth=75
cMinimumAdventureGridHeight=75
cMaximumAdventureGridWidth=500 -> here
cMaximumAdventureGridHeight=500 -> here
cMaximumTileGradient=45 -> don't edit this one !
MapSizeDefinitions=(MapSize=E_H7_MS_SMALL, Width=75, Height=75)
MapSizeDefinitions=(MapSize=E_H7_MS_SMALL_BROAD, Width=100, Height=75)
MapSizeDefinitions=(MapSize=E_H7_MS_NORMAL, Width=100, Height=100)
MapSizeDefinitions=(MapSize=E_H7_MS_NORMAL_BROAD, Width=150, Height=100)
MapSizeDefinitions=(MapSize=E_H7_MS_BIG, Width=200, Height=200)
MapSizeDefinitions=(MapSize=E_H7_MS_BIG_BROAD, Width=300, Height=200)
MapSizeDefinitions=(MapSize=E_H7_MS_HUGE, Width=500, Height=500) -> here

Here you can hard code some Options:

[MMH7Game.H7ReplicationInfo]
cGameSpeed=1.0
cGameSpeedAdventure=1.40
cGameSpeedAdventureAI=1.45
cGameSpeedCombat=1.40

[MMH7Game.H7GUIGeneralProperties]
mDevHardwareCursor=True
mAmbientOcclusion=True
mLogState=True
mNoteBarStatus=True
mQALogState=True
mWeeklyEffectPopup=True
mShowBuildTreeAll=True
mSkipTactics=False
mHoverDecalEnabled=True
mAutoPlayDialogs=True
mAutosaveEnabled=True
mGameplayWaitsForAnim=True
mColorCodeModels=True
mShowHiddenBuffs=False
mShowHiddenBuffsLog=True
mShowHiddenEffects=False

[MMH7Game.H7AdventureGridManager]
cUseFogOfWar=true

[MMH7Game.H7FOWController]
cUseTrueFogOfWar=false (?)

[MMH7Game.H7CouncilPlayerController]
mRetroFilter=False (he he)
mAlwaysQuickCombat=True (that's good)

[MMH7SystemSettings]
AllowD3D10=True

================================================== ===========

[6] Fallout 4 PC Performance and Optimization Tweaks

Still Under constuction

C:\Users\YourName\My Documents\My Games\Fallout4

In files: Fallout4Prefs.ini , Fallout4.ini

[Controls]
in this section of both files, just add line:
bMouseAcceleration=0
fMouseHeadingXScale= ( improve mouse aiming)
fMouseHeadingYScale= ( 2x the X scale for proper behaviour)

Fallout4.ini ->

[Display]
fShadowLODMaxStartFade=1000.0
fSpecularLODMaxStartFade=2000.0
fLightLODMaxStartFade=3500.0
iShadowMapResolutionPrimary=2048 (Shadows res. more= better, MAX 8192)
fMeshLODLevel1FadeDist=3500.0000
fMeshLODLevel2FadeDist=2000.0000
fMeshLODFadePercentDefault=1.2000
bNvGodraysEnable=1 (i have this set to ON)


[Interface]
fDefaultWorldFOV=75
fDefault1stPersonFOV=85

[Water]
bReflectLODObjects=0
bReflectLODLand=0
bReflectSky=1
bReflectLODTrees=0

Fallout4Prefs.ini ->

[Display]
bEnableWetnessMaterials=1
bEnableRainOcclusion=1
bSAOEnable=1
iShadowMapResolution=1024
iSize W=1792 (set Your resolution, but after that don't go to Fallout4Launcher.exe)
iSize H=1344
iPresentInterval=0 (v-sync)
bVolumetricLightingForceCasters=0 (if 1 is Better Lighting)

[Water]
bUseWaterDisplacements=1
bUseWaterRefractions=1
bUseWaterReflections=1
bUseWaterDepth=1

Best to do is Experiment (I have RadeonPRO + SweetFX 1.5.1 working NP

Invisible Lockpicking Bug: in Fallout4Prefs.ini

[Display]
iSize W=XXXX-1 (from your res subst. 1)
iSize H=YYYY-1

iSize W=1792 (this is mine)
iSize H=1344
change to
iSize W=1791
iSize H=1343

Vertical and Horizontal Mouse Movement: in Fallout4.ini

fMouseHeadingYScale=.021 -> fMouseHeadingYScale=XXXX

XXXX replace with:
.03738 if you have a 16:9 monitor.
.042 if you have a 21:9 monitor.
.028 if you have a 4:3 monitor.
.0336 if you have a 16:10 monitor.
-------------------------------------------------------------------------------
[7] Wolfenstein The New Order/Wolfenstein The Old Blood etc.

Some Optimalisation/Performance/Best Visual Options for OpenGL Engine used in Rage/Wolfenstein The New Order/Wolfenstein The Old Blood:

eg.
c:\Users\*YourName*\Saved Games\MachineGames\Wolfenstein The Old Blood\base\wolftobConfig.cfg (please set it to Read Only !!)


add in shortcut: "+toggle com_synctotime" (good for 120Hz LCD)
jobs_numthreads 6 (CPU cores)
r_usehardwaretextures 1
vt_pageImageSizeUnique "8192" (texture related)
vt_pageImageSizeVmtr "8192"
vt_pageImageSizeUniqueDiffuseOnly2 “8192"
vt_pageImageSizeUniqueDiffuseOnly “8192"
vt_useCudaTranscode “0" (1 for nV GPU's)
vt_useOpenCLTranscode "1" (for AMD GCN)
vt_uncompressedPhysicalImages “1"
image_anisotropy “16"
image_useCompression “0"
vt_maxPPF “64"
vt_lodbias “-2" (sharp textures)
hands_fovscale 1.0 (no weird FOV)
view_blur_max 0 (no Blur)
view_blur_min 0
r_postprocessdofmode 1 (DOF Off if 0 )
r_skippostprocess 1 (skip all effects)


Here is my Config:


s_voiceVolume_dB "3.721107"
jobs_numthreads 12
r_initialMonitor "0"
r_mode "13"
m_sensitivity "2.976041"
vt_uncompressedPhysicalImages "1"
vt_lodbias "-2"
r_multiSamples "2"
image_lodbias "-2"
image_anisotropy "16"
image_useCompression "0"
in_joystick "0"
vt_useOpenCLTranscode "1"
r_usehardwaretextures 1
vt_pageImageSizeUnique "16384"
vt_pageImageSizeVmtr "16384"
vt_pageImageSizeUniqueDiffuseOnly2 “16384"
vt_pageImageSizeUniqueDiffuseOnly “16384"
vt_useCudaTranscode “0"
vt_maxPPF “128"
vt_lodbias “-2"
hands_fovscale 1.0
view_blur_max 0
view_blur_min 0

-------------------------------------------------------------------------------
[8] FrostBite Engine Games: BF:4,H, SW:BF, NFS etc.

FrostBite Engine Games can benefit from this Tweaks:
Works with: BF:4 BF:H SW:BF and NFS games etc.

Remember not every FB Game uses the same Visuals for Rendering !

if you Moded the Game and it won't start head here and check the Values used by it in the config location (open with Notepad or NP++)

eg. BF4 -> C:\Users\Your Name\Documents\Battlefield 4\settings
file = PROFSAVE_profile

RenderDevice.MantleEnabled 1 (Mantle API, and now thx to it we have VULCAN API)
RenderDevice.Dx11Enable 1 (DX11.0 base)
RenderDevice.Dx11Dot1Enable 1 (DX11.1 for Radeons, uses ACE)
RenderDevice.Dx11Dot1RuntimeEnable 1 (tick this too )
RenderDevice.TripleBufferingEnable 0
Thread.MaxProcessorCount 6 (physical cores here)
WorldRender.TransparencyShadowmapsEnable 0
WorldRender.MotionBlurEnable 0
WorldRender.MotionBlurForceOn 0
WorldRender.MotionBlurFixedShutterTime 0
WorldRender.MotionBlurMax 0
WorldRender.MotionBlurQuality 0
WorldRender.MotionBlurMaxSampleCount 0
WorldRender.SpotLightShadowmapEnable 0
WorldRender.SpotLightShadowmapResolution 256
WorldRender.LightTileCsPathEnable 0
WorldRender.PlanarReflectionEnable 0
RenderDevice.RenderAheadLimit 2
PostProcess.DynamicAOEnable 0
PerfOverlay.DrawFps 1 (shows FPS)
GameTime.MaxVariableFPS 75 (FPS CAP)
-----------------------------------------------------------------------------------------------
[9] The Witcher 3 Tweaks etc.

OK now its Time for W3

The Witcher 3\bin\config\base\rendering.ini

tu >
HairWorksAALevel (default is 8) give 2 or 0
GrassDensity=1600 (Uber is 2000)


documents\Witcher 3\User.Settings
Mine in [ ]

cvMaxAllowedLightsNonShadows=40 - 25 [40]
cvMaxAllowedSpeedTree=5000 [1100 ]
cvMaxAllowedCharTextures=209715200 - give 30% less [209015200]
cvMaxAllowedDecalsSS=160 - 90 [150]
StripeHideDistance=60 - 40 [50]
CascadeShadowDistanceScale2=1.5 - 1.0
TextureStreamingDistanceLimit=200 - 160
MaxAtlasTextureSize=2048 512,1024 to 4096 ( 4096, 2048 is OK)
TerrainReadAheadDistance=140 - 90
MaxTextureSize=2048 512,1024 do 4096
HairWorksLevel=2 Hairworks [0]
TerrainScreenSpaceErrorThreshold=1.6
MaxTerrainShadowAtlasCount=4
MaxCubeShadowSize=512 give 256
TextureInFlightCountBudget=12
TerrainErrorMetricMultiplier=6
CascadeShadowmapSize=3072 - give 1024, 2048

Also give read only after edited cfg files ;-)
------------------------------------------------------------------------------------------------
[10] Batman AK Tweaks

steamapps\common\Batman Arkham Knight\BMGame\Config - BmSystemSettings.ini

Startup.swf give .BAK
StartupNV.swf give .BAK

Change MaxFPS=30.000000 to MaxFPS=120.000000 or 60.000000 etc.
AllowD3D10=True
AllowOpenGL=True
TextureResolution=2
Bloom=False
Reflections=False
bEnableCrossfire=True

[11] Rise of the Tomb Raider Tweaks

Here you have some GFX Switches to play with:

(Computer\HKEY_CURRENT_USER\SOFTWARE\Crystal Dynamics\Rise of the Tomb Raider\ Graphics)

"AsyncCompute" in that location should be 1 (GCN Only)

------------------------------------------------------------------------------------------------
All Here -> http://loccothan.blogspot.com/p/tweaks.html
UPD_01 New ! -> Wolfenstein The New Order Config
UPD_02 New ! -> pCARS optimalisation Config
Please make sure to BackUp files in pCARS -> https://mega.co.nz/#!NMNBzICb!oO2h06...13rfyf5waPLcKI
UPD_03
Please Put Power limit on GPU to 8% or 12% (in CCC or OC soft)


!================================================= ==================================!
Reserved for New Tweaks

-> http://loccothan.blogspot.com/p/game-screens-3.html

Last edited by OnnA; 10-02-2016 at 21:18.
   
Reply With Quote
Old
  (#4)
Coldblackice
Member Guru
 
Coldblackice's Avatar
 
Videocard: Sapphire 290X
Processor: Intel i7 930 @ 4.25GHz
Mainboard: EVGA e758 x58
Memory: 24GB DDR3 1600Mhz
Soundcard: HDMI->Receiver/Klipsch
PSU: Corsair TX750
Default 04-27-2015, 07:43 | posts: 123

Cool thread - subbed! Any updates on your experimenting?
   
Reply With Quote
 
Old
  (#5)
buzzkill36
Newbie
 
buzzkill36's Avatar
 
Videocard: XFX R9 280X BE
Processor: Intel i5-4670k @4.4
Mainboard: AsRock Z87E-ITX
Memory: G-Skill 8GB 1866MHz
Soundcard: H/K Soundsticks III
PSU: Silverstone 750w
Default 04-27-2015, 08:46 | posts: 7

can confirm it works...but I'm stuck with default sweetfx preset(which is fine tbh). Any updates on other presets like kputs ?
   
Reply With Quote
Old
  (#6)
OnnA
Ancient Guru
 
OnnA's Avatar
 
Videocard: Nitro Fiji-X HBM 1150/570
Processor: ZEN x8 k17 + Nepton 280L
Mainboard: ASUS Crosshair VI Hero
Memory: 16GB 3200 CL16 1T Ripjaws
Soundcard: SB-z Nichicon + Wood 5.1
PSU: Seasonic-X 750W Platinum
Talking 04-27-2015, 12:46 | posts: 2,766 | Location: HolyWater Village

What we know about DX12 and its H/W Features requirments?

Everybodys wondering what the term means eg. DX12_0 or 12_1 ?
It means that GPU supports some DX12 Features but not all !
In the moment there is no GPU that supports Real DX12.

Resource binding tiers:

Descriptors in CBV/SRV/UAV heap - >1M
CBVs per shader stage - full heap
SRVs per shader stage - full heap
UAVs across all stages - full heap
Samplers per shader stage - full heap
Feature level required - 11_1

Tiled resources tiers:

Capability required for: Tier 3
Tiled Buffer - Yes
Tiled Texture2D - Yes
Sample with LOD clamp - Yes
Sample with Feedback - Yes
NULL tile read - zero
NULL tile write - discarded
Tiled Texture3D - Yes

Conservative rasterization tiers:


Capability required for: Tier 3
Required uncertainty region - 1/256 px
Post-snap degenerate triangles - Not culled
Inner input coverage - Yes

Direct3D 12 optional features:

Resource binding - Tier 3
Tiled resources - Tier 3
Typed UAV loads for additional formats - Yes
Conservative rasterization - Tier 3
Rasterizer-ordered views - Yes
Stencil reference value from Pixel Shader - Yes
UAV slots for all stages - Full heap
Logical blend operations - Yes
Double precision (64-bit) floating point operations - Yes
Minimum floating point precision - 10/16/24/32/48bit
Resource heap - Tier 2
Viewport and render target array index from shader feeding to the rasterizer - Yes
64KB standard swizzle - Yes
Cross-adapter row-major textures - Yes

-----------

Space for New Games Tweaks etc.

Hi, Bros
I'm xTreme Gamer

All i do is for my use and from my personal experience

But i have My Blog, so i was thinking why not share my wisdom with others
So there it is -> 4 All Gamers !

Now it's only RadeonPRO + SB-z & X-Fi + some CCC tweaks in Registry (always better to look into Reg files in notepad and then edit for your GPU).

But in time will be more Tweaks for Win8.1 and for CPU OC and stuff like that !

All you need is on My Web Clouds: Mega, MediaFire and SkyDrv
You have Mods, usefull free soft etc. etc.
So yes will be updated in Time and for now is RP+ working SweetFX 1.5.1 cuz' its faster and less buggy than 1.4
Also you have Reshade + SweetFX 2.0 beta 8

-> Here -> http://loccothan.blogspot.com/p/tweaks.html

Last edited by OnnA; 06-16-2016 at 23:14.
   
Reply With Quote
Old
  (#7)
OnnA
Ancient Guru
 
OnnA's Avatar
 
Videocard: Nitro Fiji-X HBM 1150/570
Processor: ZEN x8 k17 + Nepton 280L
Mainboard: ASUS Crosshair VI Hero
Memory: 16GB 3200 CL16 1T Ripjaws
Soundcard: SB-z Nichicon + Wood 5.1
PSU: Seasonic-X 750W Platinum
Exclamation 05-01-2015, 10:51 | posts: 2,766 | Location: HolyWater Village

UPD. to SweetFX 1.5.1 for RadeonPRO is on Mega now
+ UPD. to reshade directory with my SweetFX 2.0 settings
Enjoy:

With SSAA no FPS impact noticed

Last edited by OnnA; 05-01-2015 at 11:02.
   
Reply With Quote
project CARS
Old
  (#8)
OnnA
Ancient Guru
 
OnnA's Avatar
 
Videocard: Nitro Fiji-X HBM 1150/570
Processor: ZEN x8 k17 + Nepton 280L
Mainboard: ASUS Crosshair VI Hero
Memory: 16GB 3200 CL16 1T Ripjaws
Soundcard: SB-z Nichicon + Wood 5.1
PSU: Seasonic-X 750W Platinum
Cool project CARS - 05-08-2015, 10:25 | posts: 2,766 | Location: HolyWater Village

Reserved for Tweaks

Here some Alien Isolation screens with Tweak + RP & SweetFX

 Click to show spoiler



project CARS In post no.3

Here Gallery of pCars


 Click to show spoiler


Last edited by OnnA; 09-17-2015 at 22:47.
   
Reply With Quote
Old
  (#9)
OnnA
Ancient Guru
 
OnnA's Avatar
 
Videocard: Nitro Fiji-X HBM 1150/570
Processor: ZEN x8 k17 + Nepton 280L
Mainboard: ASUS Crosshair VI Hero
Memory: 16GB 3200 CL16 1T Ripjaws
Soundcard: SB-z Nichicon + Wood 5.1
PSU: Seasonic-X 750W Platinum
Lightbulb 05-14-2015, 23:16 | posts: 2,766 | Location: HolyWater Village

UPD !

Witcher 3 XML config files snached (still we have to wait for GoG/Steam etc. release 19.V)
On mY Mega in Witcher folder

UBER sampling and Uber options confirmed !
Ability to turn Off nV features confirmed ! (but not necesarily, cuz Game is Optimized for ATI/AMD also like FC4, so we can have HBAO etc. )

forums.cdprojektred.com
   
Reply With Quote
Old
  (#10)
Quentin's_SweetFX
Master Guru
 
Quentin's_SweetFX's Avatar
 
Videocard: SAPPHIRE R9 OC 270X 4GB
Processor: Intel Core i5 2500k@4.3
Mainboard: MSI Z77A-G43 GAMING
Memory: G-Skill 8GB DDR3 1866
Soundcard: Asus ROG Xonar Phoebus
PSU: EVGA SuperNOVA NEX750G
Default 05-15-2015, 15:21 | posts: 397 | Location: uk

Nice Work
   
Reply With Quote
Old
  (#11)
OnnA
Ancient Guru
 
OnnA's Avatar
 
Videocard: Nitro Fiji-X HBM 1150/570
Processor: ZEN x8 k17 + Nepton 280L
Mainboard: ASUS Crosshair VI Hero
Memory: 16GB 3200 CL16 1T Ripjaws
Soundcard: SB-z Nichicon + Wood 5.1
PSU: Seasonic-X 750W Platinum
Lightbulb 05-15-2015, 16:35 | posts: 2,766 | Location: HolyWater Village

Quote:
Originally Posted by Quentin's_SweetFX View Post
Nice Work
Thank YOU very much Bratan'

Don't have so much time, but i do my best.
Still lot to do in Games 6-12h daily gaming.
Now im finishing DyingLight 78% Done
======
Now Back to p^Cars look into this gents: (and Now im Back to Assetto Corsa and Race07 + RR3 Free)

After patches and new drivers + Win_X and DX12_11_0 renderer it's OK Game now

 Click to show spoiler



Turn On Map HUD etc.

 Click to show spoiler


Last edited by OnnA; 08-13-2015 at 02:31.
   
Reply With Quote
Old
  (#12)
N0bodyOfTheGoat
Master Guru
 
Videocard: Sapphire Nitro R9 390 8GB
Processor: i7 5820k
Mainboard: Gigabyte X99 Gaming 5P
Memory: 4x4GB
Soundcard: Creative onboard
PSU: Corsair RM850W
Default 05-16-2015, 23:09 | posts: 180 | Location: Southampton, UK

Interesting idea, struggling to get conclusive, reproducible results with the PhysX tweaks for pCARS.

Last edited by N0bodyOfTheGoat; 05-17-2015 at 12:39.
   
Reply With Quote
Old
  (#13)
OnnA
Ancient Guru
 
OnnA's Avatar
 
Videocard: Nitro Fiji-X HBM 1150/570
Processor: ZEN x8 k17 + Nepton 280L
Mainboard: ASUS Crosshair VI Hero
Memory: 16GB 3200 CL16 1T Ripjaws
Soundcard: SB-z Nichicon + Wood 5.1
PSU: Seasonic-X 750W Platinum
Arrow 05-17-2015, 23:02 | posts: 2,766 | Location: HolyWater Village

Quote:
Originally Posted by N0bodyOfTheGoat View Post
Interesting idea, struggling to get conclusive, reproducible results with the PhysX tweaks for pCARS.
Yep i try hard to get some Performance in pC....
But i do this for Gamers that love this Game... I hope they gain some FPS through my Tips&Trics

But way better is Assetto Corsa, I sold my Account with pCars
I dont need that game any more, and patches for it will happen maby in some 4-6 months (but we cannot disable GW)

Last edited by OnnA; 06-09-2015 at 10:52.
   
Reply With Quote
Old
  (#14)
OnnA
Ancient Guru
 
OnnA's Avatar
 
Videocard: Nitro Fiji-X HBM 1150/570
Processor: ZEN x8 k17 + Nepton 280L
Mainboard: ASUS Crosshair VI Hero
Memory: 16GB 3200 CL16 1T Ripjaws
Soundcard: SB-z Nichicon + Wood 5.1
PSU: Seasonic-X 750W Platinum
Default 05-19-2015, 12:15 | posts: 2,766 | Location: HolyWater Village

UPD Witcher 3:

RadeonPRO + SweetFX working NP
Video 9/10
Audio 9/10
Gameplay 10/10
Code Optimalisation PC 7/10 (could be better, wait for updates )

Now -> I have average 52FPS
1792:1344 Opt. Uber/Ultra/High Shadows Low, no AA, no Fur, HDAO+ On
Game runs smooth as a butter, and looking Great ! GG Red's

Here some screens -> http://loccothan.blogspot.com/p/game-screens-3.html
   
Reply With Quote
The Witcher 3
Old
  (#15)
OnnA
Ancient Guru
 
OnnA's Avatar
 
Videocard: Nitro Fiji-X HBM 1150/570
Processor: ZEN x8 k17 + Nepton 280L
Mainboard: ASUS Crosshair VI Hero
Memory: 16GB 3200 CL16 1T Ripjaws
Soundcard: SB-z Nichicon + Wood 5.1
PSU: Seasonic-X 750W Platinum
Lightbulb The Witcher 3 - 05-28-2015, 10:48 | posts: 2,766 | Location: HolyWater Village

The Witcher 3 Tweaks etc.

Screens:

 Click to show spoiler


Last edited by OnnA; 05-11-2016 at 21:36.
   
Reply With Quote
Old
  (#16)
Valken
Maha Guru
 
Videocard: Forsa 1060 3GB Temp GPU
Processor: Intel i7-4970k 4GHZ
Mainboard: Asrock Z97 OC Formula
Memory: G.Skill 32GB 2400 CL10
Soundcard: ALC1150 + X-Fi MB3
PSU: Corsair RM1000
Default 05-28-2015, 13:12 | posts: 1,189

Hi Onna,

Does RP + Reshade work in OpenGL?

I am using Reshade for GZdoom and it works as a standalone.

Would great to adjust settings in Radeon Pro.
   
Reply With Quote
Old
  (#17)
OnnA
Ancient Guru
 
OnnA's Avatar
 
Videocard: Nitro Fiji-X HBM 1150/570
Processor: ZEN x8 k17 + Nepton 280L
Mainboard: ASUS Crosshair VI Hero
Memory: 16GB 3200 CL16 1T Ripjaws
Soundcard: SB-z Nichicon + Wood 5.1
PSU: Seasonic-X 750W Platinum
Lightbulb 05-29-2015, 04:32 | posts: 2,766 | Location: HolyWater Village

Quote:
Originally Posted by Valken View Post
Hi Onna,

Does RP + Reshade work in OpenGL?

I am using Reshade for GZdoom and it works as a standalone.

Would great to adjust settings in Radeon Pro.
Hi Bratan' I think it will NP try to rename reshade32 to opengl32.dll
or reshade64 and try, disable the SwettFX in RP.
Then try My SweetFX with PR 1.5.1 still its more stable overall
   
Reply With Quote
Old
  (#18)
OnnA
Ancient Guru
 
OnnA's Avatar
 
Videocard: Nitro Fiji-X HBM 1150/570
Processor: ZEN x8 k17 + Nepton 280L
Mainboard: ASUS Crosshair VI Hero
Memory: 16GB 3200 CL16 1T Ripjaws
Soundcard: SB-z Nichicon + Wood 5.1
PSU: Seasonic-X 750W Platinum
Default 05-29-2015, 04:47 | posts: 2,766 | Location: HolyWater Village

Here some usefull stuff for Witcher 3

https://mega.co.nz/#F!lA8WmSqY!odizLsIaEhfKjLe_NGRtig

https://mega.co.nz/#F!oIcV3ZTA!DVoz5DPkM32A3x-lvHmdZg
   
Reply With Quote
Old
  (#19)
OnnA
Ancient Guru
 
OnnA's Avatar
 
Videocard: Nitro Fiji-X HBM 1150/570
Processor: ZEN x8 k17 + Nepton 280L
Mainboard: ASUS Crosshair VI Hero
Memory: 16GB 3200 CL16 1T Ripjaws
Soundcard: SB-z Nichicon + Wood 5.1
PSU: Seasonic-X 750W Platinum
Lightbulb 06-14-2015, 13:58 | posts: 2,766 | Location: HolyWater Village

Please go here and Install MODED drivers for RADEON


-> http://forums.guru3d.com/showthread.php?t=399956
   
Reply With Quote
Old
  (#20)
OnnA
Ancient Guru
 
OnnA's Avatar
 
Videocard: Nitro Fiji-X HBM 1150/570
Processor: ZEN x8 k17 + Nepton 280L
Mainboard: ASUS Crosshair VI Hero
Memory: 16GB 3200 CL16 1T Ripjaws
Soundcard: SB-z Nichicon + Wood 5.1
PSU: Seasonic-X 750W Platinum
Lightbulb 06-17-2015, 00:37 | posts: 2,766 | Location: HolyWater Village

New Moded Catalyst from Win_X 15.200.10040 from June 8 working for WIN 8/7 x64


I'm just changed how it looks in Win 8/7 now it will be read as the CAT 15.5beta ;-)
And OpenCL also is working on GPU as intended.
Based and THX goes to @asder00 for AMD_Catalyst_15.200.1040.0_June8-@asder00

First download, run setup, after finish don't restart go to:
device manager click on GPU and update drivers then point ->
AMD_Catalyst_15.200.1040.0_June8-MOD15.5\Packages\Drivers\Display\WT6A_INF\ -> and click .inf file
Wait after it finishes and hit restart.

Sometimes it needs a special touch, so go to command prompt and paste:

bcdedit -set loadoptions DISABLE_INTEGRITY_CHECKS
bcdedit -set TESTSIGNING ON

To turn it on again, after instaling Moded drivers just use these commands:

bcdedit -set loadoptions ENABLE_INTEGRITY_CHECKS
bcdedit -set TESTSIGNING OFF

https://mega.co.nz/#!xEVy2CYb!ze6fGn...99od7OjDWjrdPA
   
Reply With Quote
Batman Arkham Knight
Old
  (#21)
OnnA
Ancient Guru
 
OnnA's Avatar
 
Videocard: Nitro Fiji-X HBM 1150/570
Processor: ZEN x8 k17 + Nepton 280L
Mainboard: ASUS Crosshair VI Hero
Memory: 16GB 3200 CL16 1T Ripjaws
Soundcard: SB-z Nichicon + Wood 5.1
PSU: Seasonic-X 750W Platinum
Question Batman Arkham Knight - 06-24-2015, 01:47 | posts: 2,766 | Location: HolyWater Village

Reserved 4 Tweaks


Last edited by OnnA; 05-11-2016 at 21:39.
   
Reply With Quote
Old
  (#22)
OnnA
Ancient Guru
 
OnnA's Avatar
 
Videocard: Nitro Fiji-X HBM 1150/570
Processor: ZEN x8 k17 + Nepton 280L
Mainboard: ASUS Crosshair VI Hero
Memory: 16GB 3200 CL16 1T Ripjaws
Soundcard: SB-z Nichicon + Wood 5.1
PSU: Seasonic-X 750W Platinum
Default 06-27-2015, 00:42 | posts: 2,766 | Location: HolyWater Village

So next buy is Fury-X OC WC Need to wait 2-3 months and go shoping.

Here is some OC for both GPU & HBM ;-)

 Click to show spoiler



and some Features New to Fiji

 Click to show spoiler



And source -> http://uk.hardware.info/reviews/6158...-graphics-card
   
Reply With Quote
Old
  (#23)
OnnA
Ancient Guru
 
OnnA's Avatar
 
Videocard: Nitro Fiji-X HBM 1150/570
Processor: ZEN x8 k17 + Nepton 280L
Mainboard: ASUS Crosshair VI Hero
Memory: 16GB 3200 CL16 1T Ripjaws
Soundcard: SB-z Nichicon + Wood 5.1
PSU: Seasonic-X 750W Platinum
Lightbulb 07-03-2015, 20:43 | posts: 2,766 | Location: HolyWater Village

Some Tweaks if you have CRT Monitor, you can disable in Registry some values (5-12FPS gain here) ->

PP_MCLKStutterModeThreshold = 1000 (4096) or even less ;-)
and:
StutterMode = 0

+

Run CMD with Administrator Rights and copy this:

bcdedit /set disabledynamictick yes

And Turn OFF HPET:

bcdedit /deletevalue useplatformclock (then reboot) disable HPET

----
bcdedit /set useplatformclock true (then reboot) enable HPET (if you wanna revert)

Last edited by OnnA; 07-03-2015 at 20:47.
   
Reply With Quote
Old
  (#24)
someonelikeyou
Member Guru
 
Videocard: PowerColor R7 260x
Processor: FX6300
Mainboard:
Memory:
Soundcard:
PSU: 600w
Default 07-07-2015, 15:27 | posts: 71

Quote:
Originally Posted by OnnA View Post
Some Tweaks if you have CRT Monitor, you can disable in Registry some values (5-12FPS gain here) ->

PP_MCLKStutterModeThreshold = 1000 (4096) or even less ;-)
and:
StutterMode = 0

+

Run CMD with Administrator Rights and copy this:

bcdedit /set disabledynamictick yes

And Turn OFF HPET:

bcdedit /deletevalue useplatformclock (then reboot) disable HPET

----
bcdedit /set useplatformclock true (then reboot) enable HPET (if you wanna revert)
Can you elaborate on that? I have a FX6300 + R7 260x AND a CRT monitor so I'm really interested in what this does.
   
Reply With Quote
Old
  (#25)
OnnA
Ancient Guru
 
OnnA's Avatar
 
Videocard: Nitro Fiji-X HBM 1150/570
Processor: ZEN x8 k17 + Nepton 280L
Mainboard: ASUS Crosshair VI Hero
Memory: 16GB 3200 CL16 1T Ripjaws
Soundcard: SB-z Nichicon + Wood 5.1
PSU: Seasonic-X 750W Platinum
Lightbulb 07-11-2015, 19:14 | posts: 2,766 | Location: HolyWater Village

Quote:
Originally Posted by someonelikeyou View Post
Can you elaborate on that? I have a FX6300 + R7 260x AND a CRT monitor so I'm really interested in what this does.
No oficial statement is provided for that option
But i think it makes gameplay more smooth on CRT monitors.
It definitly removes spikes from GPU->CRT render frames.
CRT is CRT, try it and tell me.
I am happy with this settings
   
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump



Powered by vBulletin®
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
vBulletin Skin developed by: vBStyles.com
Copyright (c) 1995-2014, All Rights Reserved. The Guru of 3D, the Hardware Guru, and 3D Guru are trademarks owned by Hilbert Hagedoorn.