 |
|
|
|
 |
 |
 |
 |
|
|||||||
 |
 |
 |
Die-hard Overclocking & Case Modifications Want to overclock that processor, videocard or even mainboard ? Wanna tweak the best out of your piece of hardware or have the means to design a killer case ? Get in here and pimp that rig man.
|
|
 |
|
|
Thread Tools | Display Modes |
 |
[Project] - IMPERATOR X - Rev. 1 |
 |
|
|
|
(#1)
|
|
Newbie
Videocard: 2x Gtx680 (SLI)
Processor: Intel 3930k
Mainboard: Asrock Extreme 11
Memory: Dominator Platinum [16GB]
Soundcard: Tritton Ax Pro
PSU: Corsair Ax1200
|
[Project] - IMPERATOR X - Rev. 1 -
09-28-2012, 20:02
| posts: 23 | Location: Brazil
Hello everybody, I am preparing a new project, and decided to post here at Guru3D ...
I'm from Brazil, so forgive me if I write something wrong ... THE HOME It started with the idea of mounting a water cooler system, then just had to switch case, because my old case had not space enough to accommodate radiators inside, so I started "looking" for an ideal case. THE CASE Well, here in Brazil we have few good options for cases involving a large project with system water cooler, here we have only two good cases that is the line Obsidians Corsair and Coolermaster Cosmos II. So it had to be one of these two, however I wanted to put two radiators, one 480mm in the roof and another 240 on the floor of the case, and soon discovered that would not do this with any of the above two cases, then had to leave looking for a case that does not have in my country, would have to import a totally different case. So it was that one day I was talking with a friend that helped me a lot with my project, he showed me a cabinet that would support my idea, so it was there that I met the case Azza Genesis 9000B, and fell in love, and had not in my country I had to give it my way, and I could import this case, it is much cheaper in the United States, however as most know, the taxes here my country is absurd, I imported it, I paid 165 USD on it, I had to pay 250 USD for shipping (FEDEX), and coming here the IRS taxed on the value of 170 USD, in conclusion, this case has a total of 585 USD, due to high taxes and cost of sending this case for my country, but even more worth it because everything here is expensive, a Cosmos II costs the value of 600 USD here, and Genesis 9000 leaving just a bit cheaper than COSMOS II and still offers a larger space for radiators, incorporating a 480mm radiator in the ceiling and another 240mm on the floor ... THE MOTHERBOARD The motherboard also has a hardship to get as soon as launched the motherboard ASROCK EXTREME 11 I wanted it, and there might be another, I found a supplier of canada with just three weeks of release motherboard, and soon managed care her face went well, however I need it soon ... Well, now that I spoke a little of the difficulties faced to start my project, here's the hardware that I use ... HARDWARES 1) Case: Azza Genesis 9000B [OK] 2) Motherboard: Asrock Extreme 11 [OK] 3) CPU: i7 3930k Rev. C2 [OK] 4) memoirs: Kit1 - 4x4gb Corsair Dominator Platinum 2133mhz 5) VGA: 2x GTX 680 (SLI) [OK] 6) SSD: 4x Corsair 120gb GT Séries p/ Raid0 7) HD: Seagate 2TB Sata 3 (7200rpm) 64mb cache [OK] 8) Energy: Corsair AX1200 [OK] WATERCOOLER 1) Block CPU: Xspc Raystorm 2) Block VGA's: 2x EK - FC680 GTX - Nickel CSQ 3) Bomba: 2x Swiftech MCP655 Speed Controller 4) Top: Bitspower BP-2D5TOPP-BK ( Dual D5 Pom Version) 5) Radiator 1: Alphacool NexXxoS UT60 Fullcooper 240mm 6) Radiator 2: Alphacool NexXxoS XT45 Fullcooper 480mm 7) Reservoir: EK Multioption RES X2 - 250 Advanced 8) Fittings: Monsoon, Bitspower, Enzootech. Xspc, Koolance (várias marcas) 9) Tubes: Primoflex PRO LRT Blue or Xspc Rose Blue (1/2in. ID X 3/4in OD) 10) Koolant: not defined, it depends on which hose is I choose FANS 1) Radiator 480: 8x Cooler Master Xtraflow (82.9cfm - 2000rpm) 2) Radiator 240: 4x Koolance HBK (106.7cfm - 2600rpm) 3) Chassi: 3x Cooler Master R4 Sickerflow (69cfm - 2000rpm) ACCESSORIES 1) Fans Controller: G-vans GV1FC-5 2) Cables: Extensors Black and Blue 3) Cables fan: 4x Y-cable Phobya 3pin molex to 4x 3pin molex 60cm 4) Rubber: Wire Bundle 4x 3/4 in 5) Led Sleeve: 2x Nzxt Sleeved Led Cable Kit 1 metro (blue) 6) Led refletor: Premium led Spotlight (Blue) 7) Led pingo: Koolance Ultra Brigth Led (Uv) 8) Bare neon: 2x barra 8" blue 9) Fan de Baia: Lian Li BZ-502B (black) PERIPHERAL 1) Monitor: Benq XL2420T (1920x1080p, 120hz, 3D Vision, 2ms...) [OK] 2) Mouse: Razer Mamba 4G 6400DPI (Dual Sensor) [OK] 3) Keyboard1: A4Tech KD-600L (quebra-galho) [OK] 4) Keyboard2: Mad Catz Striker 7 5) Headset: Tritton Ax Pro 5.1 [OK] 6) Mouse Pad: Zowie Spawn G-TF c/ apoio de pulso(Razer vespula) [OK] 7) Controler: Razer Onza Tournalment Edition [OK] Obs* The peripheral will post only after completing the final design not to leave out of context. -------------------------------------------------------------------- Now let the pictures... THE TABLE The table was one of the first changes, so decided the case, I had to change the table to be able to use the R-ATX case that is much better, so here's a photo of the table as it was and as it is now, I particularly preferred as it was before, but it was for a greater cause, lol ... BEFORE  NOW  CASE In the car yet, so I took  Gallery of photos taken at various places in the house...      Soon I will post the pictures disassembling the case to see if it really worth it... |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
(#2)
|
|
Newbie
Videocard: 2x Gtx680 (SLI)
Processor: Intel 3930k
Mainboard: Asrock Extreme 11
Memory: Dominator Platinum [16GB]
Soundcard: Tritton Ax Pro
PSU: Corsair Ax1200
|
09-28-2012, 20:04
| posts: 23 | Location: Brazil
Today atarde desmonter decided to take the case fans and original ja measure its internal space to order the first shipment of parts from Performance-pcs, follows the photos plucking the big guy ...
Taking bolt to take the tray...  Screws holding the bandeija (13 screws) and sides (4 screws)  I pull the tray...  Tray out of the case  unscrewing the roof...  Top panel removed, fans of 230 inhabit the ceiling, remove to accommodate future four 120mm fans ...  Fans 230mm removed, will wait 120mm fans ...  Removing bays and unscrewing the 1st floor ...  Floor removed, anti-dust filter...  taking the anti-dust filters...  All parts removed..  only the structure...  Measuring case  reassembled ...  The case has met my expectations, it is a radiator in the ceiling of 480mm and 60mm thick, and the ground lies a radiator 240mm 100mm thick, success!  The box came destroyed because they opened it in federal revenue, so she had no more usefulness and eventually became my son's toy ... hehe |
|
|
|
|
|
|
|
|
|
|
|
|
(#3)
|
|
Newbie
Videocard: 2x Gtx680 (SLI)
Processor: Intel 3930k
Mainboard: Asrock Extreme 11
Memory: Dominator Platinum [16GB]
Soundcard: Tritton Ax Pro
PSU: Corsair Ax1200
|
09-29-2012, 16:28
| posts: 23 | Location: Brazil
Hey, I'm here posting some more of the photos I have here the project I'm working until the end of the year I can leave it ready over the days I will posting the pictures of the modifications of the case ...
MOTHERBOARD Asrock Extreme 11 x79      PROCESSOR i7 3930k   STORAGE    GRAPHIC CARDS 2x GTX 680 (SLI)   ENERGY Corsair Ax 1200    Well, for now these are only hardware I have in hand, this week I will post the pictures of the changes I'm working on the case ... As my design is black with blue themes, I bought parts of Genesis 9000W (white) bought the top and front panel to use their blue leds and put in my case, also cut the side to make a pretty big window ... Hugs! |
|
|
|
|
|
|
|
|
|
|
|
|
(#4)
|
|
Newbie
Videocard: 2x Gtx680 (SLI)
Processor: Intel 3930k
Mainboard: Asrock Extreme 11
Memory: Dominator Platinum [16GB]
Soundcard: Tritton Ax Pro
PSU: Corsair Ax1200
|
10-02-2012, 22:49
| posts: 23 | Location: Brazil
As my design is black with blue themes, I bought the front and top panels of the case genesis9000W (white) to take the blue leds and put in my project, following the pictures of the panels arrived and realized that customization ...
The Box  The painels  The customization of the panels         The Results   Doing so gave a big job, more in the end I was satisfied with the outcome, the next step is to cut the side to make room for a glass window, probably tomorrow or the day after tomorrow I'll post the photos... 
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
(#5)
|
|
Newbie
Videocard: 2x Gtx680 (SLI)
Processor: Intel 3930k
Mainboard: Asrock Extreme 11
Memory: Dominator Platinum [16GB]
Soundcard: Tritton Ax Pro
PSU: Corsair Ax1200
|
10-04-2012, 15:48
| posts: 23 | Location: Brazil
Today's left some free time, so now I will post photos of the work on the side, the result was very good at the end ... see the photos...
Before cutting, lateral goodbye .. lol  Cutting the side, now no return ..  Mission accomplished, lateral cut!  Now making glass fixation, was used double-sided tape to attach the glass as showing in this photo ...  Case already with the side with the glass and secured ...   So far it's only now I'm waiting for the purchases of water cooler parts and other hardware come ... so is getting the pieces I post the pictures here ... |
|
|
|
|
|
|
|
|
|
|
|
|
(#6)
|
|
Maha Guru
Videocard: Reference GTX 680 SLI
Processor: 3770K 4.2 HT enabled H60
Mainboard: ASUS Sabertooth P67
Memory: 8GB Corsair XMS3 DDR31600
Soundcard: Creative X-Fi Titanium
PSU: Corsair Professional 850
|
10-05-2012, 06:58
| posts: 1,242 | Location: Melbourne, FL
Nice looking window brother
that your dad helping you cut it out? cool guy worlds needs more hands on parents |
|
|
|
|
|
|
|
|
|
|
|
|
(#7)
|
|
Master Guru
Videocard: GTX TITAN@1202/3305
Processor: FX-6300 4.6Ghz
Mainboard: Gigabyte GA-970A-UD3
Memory: 8GB Corsair 1.6Ghz C8
Soundcard: TBX11/12, Pioneer 5.1 HT
PSU: Corsair GS 800Watt series
|
10-05-2012, 21:40
| posts: 467 | Location: Croatia
Wait, two 680's from different companies, wont that mess up, I mean the clocks are different for each, right??
|
|
|
|
|
|
|
|
|
|
|
|
|
(#8)
|
|
|
Newbie
Videocard: 2x Gtx680 (SLI)
Processor: Intel 3930k
Mainboard: Asrock Extreme 11
Memory: Dominator Platinum [16GB]
Soundcard: Tritton Ax Pro
PSU: Corsair Ax1200
|
10-06-2012, 02:39
| posts: 23 | Location: Brazil
Quote:
The cut was made with the help of a friend who has a joinery wood furniture ... Tomorrow I will post the pictures of the first shipment of parts arrived from performance-pcs. This week I will do some mods with metal plates to give a better finish to the watercooler .. Thank you for coming, it's great to see someone watching my project! 
|
|
|
|
|
|
|
|
|
|
|
|
|
|
(#9)
|
|
|
Newbie
Videocard: 2x Gtx680 (SLI)
Processor: Intel 3930k
Mainboard: Asrock Extreme 11
Memory: Dominator Platinum [16GB]
Soundcard: Tritton Ax Pro
PSU: Corsair Ax1200
|
10-06-2012, 02:43
| posts: 23 | Location: Brazil
Quote:
Why do you ask that? ever seen a problem occurs with different video cards in SLI? Note * forgive my English is a little newbie! |
|
|
|
|
|
|
|
|
|
|
|
|
|
(#10)
|
|
Newbie
Videocard: 2x Gtx680 (SLI)
Processor: Intel 3930k
Mainboard: Asrock Extreme 11
Memory: Dominator Platinum [16GB]
Soundcard: Tritton Ax Pro
PSU: Corsair Ax1200
|
10-06-2012, 20:32
| posts: 23 | Location: Brazil
Now I will post the pictures of the first shipment of parts procurement system cooler water, purchase arrived yesterday, and has two more purchases coming to me, so get shopping I'll post photos of the other pieces, and mods I'll do at the office during the week!
Box  My son sat in the box, stop everything will break .. LOL rsrs  Flatbed, the order came well packaged and well protected  In this purchase came the main parts of the water cooler, and also came a few pieces of mods (leds-iluninação) I asked to test ... First I will show the main pieces, and then the pieces of mods ... The pieces that came in this shipment: Came two radiators, dual top, tank, the cpu block, a fan test and two piece of hose to choose which shade of blue I'll use in my system ...  Let's start with the cpu block   The reservoir I think I was one of the last to get this model EK, EK saw that stopped production of this model, and this produces a different model of 250, do not know what changes are, the more hope it's good  The dual top for two pumb D5  The fan I bought this fan just for testing, but it does not like, it starts with 7 volts, is a very loud noise, I will not use this model in my system, I'm leaving for the Koolance fans HBK-cooler 240 which will be on the ground  Radiators   The radiator of 240 that will be on the floor I chose the model of UT60 Alphacool because it comes with that hole behind allowing you take a beautiful drainage system using some fittings and a drain-plug!  H oses I asked two different piece of hose so I could see firsthand the quality and color of these two hoses of different brands, so I can choose what I will use in my project ... The left is Primoflex LRT Blue - she is a little darker, however has a very elegant sheen. The right is the brand XSPC Blue Rose, she has a lighter color compared with the other, however has a more matte appearance. Conclusion: I liked the two hoses, I'm very undecided on which I will use in my system, more is almost decided that I will stay with XSPC because it has a better quality of material and color is lighter, better then contrasts with the case that is black  And the other part of the purchase are parts to mod the case, are lights, rubber finishing  This is it, this week I will do some mods on the case, so I have something interesting to post here. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
(#11)
|
|
Newbie
Videocard: XFX HD 6870 Crossfire
Processor: Intel 2500k
Mainboard: Asus P8P67 Pro Rev 3.1
Memory: Corsair Vengeance 4x4gb
Soundcard:
PSU: Corsair TX850w
|
10-08-2012, 22:40
| posts: 21
Looks good. It looks like your going all out, cant wait to see the results.
|
|
|
|
|
|
|
|
|
|
|
|
|
(#12)
|
|
|
Newbie
Videocard: 2x Gtx680 (SLI)
Processor: Intel 3930k
Mainboard: Asrock Extreme 11
Memory: Dominator Platinum [16GB]
Soundcard: Tritton Ax Pro
PSU: Corsair Ax1200
|
10-09-2012, 13:14
| posts: 23 | Location: Brazil
Quote:
This week I will make some changes in case if it goes long post photos |
|
|
|
|
|
|
|
|
|
|
|
|
|
(#13)
|
|
Newbie
Videocard: 2x Gtx680 (SLI)
Processor: Intel 3930k
Mainboard: Asrock Extreme 11
Memory: Dominator Platinum [16GB]
Soundcard: Tritton Ax Pro
PSU: Corsair Ax1200
|
10-13-2012, 21:37
| posts: 23 | Location: Brazil
Now is the second purchase of parts for the system water cooler, follows the fo tos below the parts that arrived
The Box   All parts outside the box on the table  Pumps 2x Swiftech MCP655 Speed Control Edition   FAN CONTROL 1x Gvans 30watts per channel  FANS I chose the Koolance HBK because of good performance and low noise Four of them will be used in 240mm radiator, and the other two are used on the chassis of the case  FITTINGS Compression Fittings Mosoon kit (3x kits) I really liked the fittings of the monsoon, I thought with good quality and very beautiful    Extensores 8x xspc and 2x enzotech The extensor xspc are nicer, they are more chrome, while enzotech has a slight yellowish tone  Stop Plugs 12x Enzotech The plugs stop the enzotech are beautiful, identical to the bitspower, the difference is that they do not come anything drawn in its base  Rotary Fittings 7x 45º Bitspower Needless to say nothing is great bitspower  All fittings  It is these pieces that came to me, now get over missing two purchases that are coming to start assembling the system...
|
|
|
|
|
|
|
|
|
|
|
|
|
(#14)
|
|
Newbie
Videocard: 2x Gtx680 (SLI)
Processor: Intel 3930k
Mainboard: Asrock Extreme 11
Memory: Dominator Platinum [16GB]
Soundcard: Tritton Ax Pro
PSU: Corsair Ax1200
|
10-14-2012, 18:50
| posts: 23 | Location: Brazil
With nothing to do today, I decided to see how the monsoon is fitting hose xspc in blue, and the result was very satisfactory, I am very happy to have bought the blue color of the hose xspc to use the system, I liked it a lot.
 Fitting monsoon more fitting rotary bitspower 45 ° installed on top, it was very beautiful!  And here's a picture of my desk with the case disassembled waiting to get all the parts to start assembling the new system  That's right, this week will run make running behind the plate to maintain a second floor in case, if you have news I post here. |
|
|
|
|
|
|
|
|
|
|
|
|
(#15)
|
|
Newbie
Videocard: 2x Gtx680 (SLI)
Processor: Intel 3930k
Mainboard: Asrock Extreme 11
Memory: Dominator Platinum [16GB]
Soundcard: Tritton Ax Pro
PSU: Corsair Ax1200
|
10-28-2012, 20:43
| posts: 23 | Location: Brazil
Passing here just to upgrade with an order that arrived this week, follow the pictures
8 FANS COOLER MASTER XTRAFLO FOR RADIATOR 480mm    I asked these extenders sleeves to give a more beautiful the system, that are extenders for power, reset, hdleds, speaker ... Soon I will ask other extenders to other cables  For now that's it, this week should get some more orders coming directly from the United States, so get the pictures I post here
|
|
|
|
|
|
|
|
|
|
|
|
|
(#16)
|
|
Newbie
Videocard: MSI 560 Hawk TI @ 1GHz
Processor: i5-760 Quad Core 4.0GHz
Mainboard: Gigabyte H55-S2
Memory: Vengeance 8GB@ 1667MHz
Soundcard: No sound card :)
PSU: 750-W performance supply
|
10-29-2012, 19:58
| posts: 8 | Location: Romania
Holy ****...
Sorry if I missed that part, but for what are you going to use that system? :o |
|
|
|
|
|
|
|
|
|
|
|
|
(#17)
|
|
|
Newbie
Videocard: 2x Gtx680 (SLI)
Processor: Intel 3930k
Mainboard: Asrock Extreme 11
Memory: Dominator Platinum [16GB]
Soundcard: Tritton Ax Pro
PSU: Corsair Ax1200
|
11-03-2012, 00:06
| posts: 23 | Location: Brazil
Quote:
|
|
|
|
|
|
|
|
|
|
|
|
|
|
(#18)
|
|
Maha Guru
Videocard: HD5770 1GB 1005/1340 1.3v
Processor: I5 2400 3.2 stock cooler
Mainboard: H61M-ITX
Memory: 2x4 DDR3 1333 (8GB) CL7
Soundcard: Realtek @ X-FI MOD
PSU: Corsair HX750
|
11-03-2012, 00:39
| posts: 1,091 | Location: Portugal
Beleza. x)
|
|
|
|
|
|
|
|
|
|
|
|
|
(#19)
|
|
|
Newbie
Videocard: 2x Gtx680 (SLI)
Processor: Intel 3930k
Mainboard: Asrock Extreme 11
Memory: Dominator Platinum [16GB]
Soundcard: Tritton Ax Pro
PSU: Corsair Ax1200
|
11-05-2012, 12:30
| posts: 23 | Location: Brazil
Quote:
É muito bom ter gente nossa em forums como esse!
|
|
|
|
|
|
|
|
|
|
|
|
|
|
(#20)
|
|
Newbie
Videocard: 2x Gtx680 (SLI)
Processor: Intel 3930k
Mainboard: Asrock Extreme 11
Memory: Dominator Platinum [16GB]
Soundcard: Tritton Ax Pro
PSU: Corsair Ax1200
|
11-05-2012, 12:42
| posts: 23 | Location: Brazil
Hey Guys, got another order from the United States for me, this time there were two parts to the system and a peripheral, follow pictures...
The box  The Parts  The first of Brazil, Keyboard fantastic    Memories - Corsair Dominator Platinum     The ssds Already had two, are now four for the new system   Now to wait for the last order that is already to get... Have a good Weekend!
|
|
|
|
|
|
|
|
|
|
|
|
|
(#21)
|
|
Newbie
Videocard: 2x Gtx680 (SLI)
Processor: Intel 3930k
Mainboard: Asrock Extreme 11
Memory: Dominator Platinum [16GB]
Soundcard: Tritton Ax Pro
PSU: Corsair Ax1200
|
11-11-2012, 17:14
| posts: 23 | Location: Brazil
Reached last order, now we just need to mount the system
Below are the photos of the last order that was needed to be with all the pieces:   The rest of the fittings that were lacking in previous purchases  The blocks for vgas   Bridge dual paralele   Hoses (blue hose xspc asked for the system and primoflex black to make the system drain the radiator UT60 240mm)  Mayhems blue dye to define the color of the fluid and blue dye to react the UV light  Primochill ice clean  Now that all materials for assembly the system here is a picture of everything that will be used in the system in two separate photos by hardware and waltercooler: HARDWARES  WALTERCOOLER  Now only remaining ride, so get ready the new project I post the photos here, hug everyone!
|
|
|
|
|
|
|
|
|
|
|
|
|
(#22)
|
|
Member Guru
Videocard: 2x Asus GTX 660 DC2 @ SLI
Processor: i5 2500k @ 4500MHz
Mainboard: Asus P8Z68 V-PRO
Memory: Avexir 4x4GB @ 1900MHz
Soundcard: Onboard
PSU: Corsair TX850W
|
11-18-2012, 15:06
| posts: 49 | Location: Portugal
Boas de Portugal.
Tens aí um sistema absolutamente brutal! Fico à espera de fotos da montagem... Abraço |
|
|
|
|
|
|
|
|
|
|
|
|
(#23)
|
|
|
Newbie
Videocard: 2x Gtx680 (SLI)
Processor: Intel 3930k
Mainboard: Asrock Extreme 11
Memory: Dominator Platinum [16GB]
Soundcard: Tritton Ax Pro
PSU: Corsair Ax1200
|
11-18-2012, 15:17
| posts: 23 | Location: Brazil
Quote:
Ja estou postando as fotos da montagem... grande abraço! |
|
|
|
|
|
|
|
|
|
|
|
|
|
(#24)
|
|
Newbie
Videocard: 2x Gtx680 (SLI)
Processor: Intel 3930k
Mainboard: Asrock Extreme 11
Memory: Dominator Platinum [16GB]
Soundcard: Tritton Ax Pro
PSU: Corsair Ax1200
|
11-18-2012, 15:40
| posts: 23 | Location: Brazil
Hey guys, now here are some pictures of the mounting system...
Radiator 480mm fans + source and installed in case  UT60 240mm radiator with the drainage system installed  UT60 240mm Radiator + fans Koolance HBK installed in case  Video blocked plates (EK FC680 GTX)  Bridge EK  Blcok installed cpu (XSPC Raystorm)  Vgas instaled in motherboard  System installed, cables behind the tray  System installed hardware and water flow finalized  Fluids, the left is the original and the right is what added the blue dye mayhems  UV fluids Reagences  Funnel graft to the reservoir system  Filling the system with fluid  System ready, complete fluid   Okay, just put the pictures of the complete system with peripherals and tests .. hug everyone, and good week! |
|
|
|
|
|
|
|
|
|
|
|
|
(#25)
|
|
Newbie
Videocard: XFX HD 6870 Crossfire
Processor: Intel 2500k
Mainboard: Asus P8P67 Pro Rev 3.1
Memory: Corsair Vengeance 4x4gb
Soundcard:
PSU: Corsair TX850w
|
11-23-2012, 05:17
| posts: 21
Looks very very nice!
Good work. Do you have any dark shots with the uv lighting? |
|
|
|
|
|
|
|
«
Previous Thread
|
Next Thread
»
| Thread Tools | |
| Display Modes | |
Linear Mode
|
|
Powered by vBulletin®
Copyright ©2000 - 2013, Jelsoft Enterprises Ltd.
vBulletin Skin developed by: vBStyles.com
Copyright ©2000 - 2013, Jelsoft Enterprises Ltd.
vBulletin Skin developed by: vBStyles.com
Copyright (c) 1995-2012, All Rights Reserved. The Guru of 3D, the Hardware Guru, and 3D Guru are trademarks owned by Hilbert Hagedoorn.