| posts: 3,006 | Location: Not Far North Enough (England)
@onemoar: I've been running these clocks for a month with Xfire on and never had any problems.
Temps are 50 idle and about 70 load.
Currently on Driver 12.3, I will download and give 12.4 a go.
Monitor drivers are up to date, attached using DVI full link. I'll try setting the clocks back to stock first, see if that fixes anything.
Watch this space...
Right, chaning clocks back to stock didn't fix it.
Using my other card as primary works fine with Xfire off, but I get green lines instead of white ones with it on. It looks like there's a perfectly clear picture behind the green/white lines.
Last edited by BLEH!; 04-14-2012 at 10:56.