New beta version discussion

Ray Adams · *Last edited by Ray Adams; 05-25-2007 at 10:29.*

Uploaded new beta version
1.3.6.1044
* Updated ini files handling procedures to be more compatible with Windows Vista

http://www.radeon.ru/downloads/att/b/attsetup.exe

djkemp1 · 05-24-2007, 17:44 | posts: 20

is this only change as i have the previous version and don't have crossfire, is it ok to leave that one on for now i should i update?

are you meant to run atitray tools as administrator, as i haven't had problems not running as admin in vista. or is there something that isn't working correctly by not running as admin.

thanks for the help

Ray Adams · 05-24-2007, 19:59 | posts: 4,942

You can stick with release. This is just small localization subsystem update

djkemp1 · 05-25-2007, 23:43 | posts: 20

are you able to answer my second point anyone

Quote:

are you meant to run atitray tools as administrator, as i haven't had problems not running as admin in vista. or is there something that isn't working correctly by not running as admin.

cheers

Ray Adams · 05-29-2007, 12:12 | posts: 4,942

Quote:

are you meant to run atitray tools as administrator

No. No needs to run it as admin. Just use administrator account to install

djkemp1 · 05-29-2007, 19:11 | posts: 20

cheers for the help ray

djsolidsnake86 · 06-03-2007, 19:33 | posts: 207 | Location: Italy

in latest beta i have dirext3d and opengl profile separated

Ray Adams · 06-03-2007, 20:56 | posts: 4,942

I assume you don't have CCC installed? Go to the Advanced tweaks and select "CCC mode switch" database

Sta1ker · 06-10-2007, 18:03 | posts: 2

Hey Ray. I've been using ATT for a long time. Why in these betas Volume control in Hot Keys is gone? (in Vista x64) It was very usefull for me, I use headphones only, any chances we'll see it back?

Ray Adams · 06-10-2007, 22:08 | posts: 4,942

Quote:

Why in these betas Volume control in Hot Keys is gone?

Incompatible under Vista.

dada123 · *Last edited by dada123; 06-12-2007 at 09:59.*

Hey, dont know if its a problem with the new beta verion but older version runs without the problem. My card dont change 2d and 3d mode. Just runs in 2d mode. Ati HotKeyPoller is on but wont change the memory when i start a 3d application...
I tried a new installation but dont change anything. Is there anything changed in the beta that this could happen?

any idea what it could be?

dada

edit: my system runs on xp 32bit

Ray Adams · 06-12-2007, 12:09 | posts: 4,942

Quote:

I tried a new installation but dont change anything. Is there anything changed in the beta that this could happen?

Nothing was changed. Just be sure you didn't touch OverCloking in ATT with Driver Level or it will overwrite any OverDrive settings and you will not get 2d/3d clocks with Catalyst

Sta1ker · 06-18-2007, 20:58 | posts: 2

Here a bug goes: in Battlefield 2 taking screenshots causes BSOD very often. No matter bmp, jpg or png and I've tried it with different drivers and ATT versions.

my specs:
CPU Intel Core 2 Duo E6600 2.40GHz@2.66GHz
RAM NCP 3x1024MB 667MHz@740MHz
Videocard Sapphire Radeon X1900 GT 256MB Soundcard Creative Sound Blaster X-Fi XtremeGamer Fatal1ty
Storage Seagate Barracuda ST3120827AS
Motherboard Intel D975XBX
OS Windows Vista Home Basic 64-bit

willardjuice · 06-22-2007, 18:32 | posts: 54 | Location: New Jersey

I think I found a bug. It appears ATT incorrectly detects the memory settings for Overdrive (I have a X1950CF, currently in a single configuration).

As you can see ATT thinks my max memory is 900 (when it should be 1100; in fact ATT's max is under my default memory speed of 1000).

Not a big issue, but I thought I should bring it to your attention (I'm running Vista x64 btw if that helps).

Ray Adams · 06-22-2007, 19:54 | posts: 4,942

It better to use SEARCH before posting some "bugs"

! ATT will show SAME values as Catalyst because ATT reads them from Catalyst. And for your board you HAVE to increase upper memory limit in ATT's general settings.

totya · **bugs -** 06-23-2007, 23:09 | posts: 117

Hi Ray Adams!

1. v1.3.6.1046 beta cause BSOD on my XP SP2 system. I don't use this.
2. v1.3.6.1044 beta cause "Advanced Disc Catalog" (version is latest 1.51) program freeze, my virus scanner says : "buffer overrun".

If I add "Adc.exe" to hardware/auto overlocking/exclude list
or
tools&options/general options/general tab/agressive 3D detection uncheck,
the result : adc works correctly.

Thank you, this is great application, I think this is the best ATI utility on the world.

Sorry my poor english.

Ray Adams · 06-24-2007, 20:18 | posts: 4,942

Quote:

If I add "Adc.exe" to hardware/auto overlocking/exclude list

This is only way to do when you find incompatible software.

totya · 06-25-2007, 00:12 | posts: 117

Quote:

Originally Posted by Ray Adams

This is only way to do when you find incompatible software.

Hi, not exactly, ADC application is freeze when start, if ATT running. These settings (agressive 3d detection or add excluse list) must if I want run ADC application...

binormalkilla · 06-25-2007, 06:43 | posts: 394 | Location: Arkansas

Have there been any updates on the Crossfire front? I posted my system info before and after Crossfire in the specified thread.
THanks for the great app! You know you're famous right? :p

crowler.ar · 06-27-2007, 01:58 | posts: 24 | Location: Argentina

Hi Ray, just wondering. Are you planning to include control to choose over the new color system available in cat7.5 ? I'm talking about "MCE and Standard"

totya · 06-27-2007, 11:07 | posts: 117

Hi, ATT v1.3.6.1044 too cause BSOD on my XP SP2 system. (Else application never cause BSOD)

Under install, I check old i2c system (best comp with R5xx board).

I probe 1042 official...

Ray Adams · 06-27-2007, 12:32 | posts: 4,942

Quote:

Originally Posted by crowler.ar

Hi Ray, just wondering. Are you planning to include control to choose over the new color system available in cat7.5 ? I'm talking about "MCE and Standard"

May be

The one problem is I have last beta version of Catalyst + CCC (8.40) and there are no such option at all (disappeared)

I don't know is it will be removed in next releases or not.