e6600 3.4Ghz what do you think?

Denny85

what do you think? is it hot? scythe infinity.

idle

load

SolidBladez · 04-20-2007, 01:23 | posts: 3,721 | Location: CO

With a aftermarket cooler, yes.

I get 22-25 idle and 44 load @ 3.4Ghz

Mike.

waway625 · 04-20-2007, 01:28 | posts: 7,931 | Location: Singapore

45c Coretemp idle is about the idle im getting on a stock cooler, an undervolted e6300 (1.25vcore from 1.325) and stock speed on a hot 34c day....

whats your room temp BTW, TAT at 65c is at the edge of the thermal envelope though (at 70c its considered HOT,at 75c the CPU begins to throttle and at 80c it will shutdown)

anyway, i recommend reading the Core2duo temperature guide...its quite a long read but very informative

Denny85 · 04-20-2007, 02:02 | posts: 1,001 | Location: Planet Earth

This is my chip! it runs hot what can i do, it's from the factory. was made to be hot, some were made to be cool. some runs at 20's some at 40s.
lap?

MrFox · 04-20-2007, 03:04 | posts: 828 | Location: Australia

Yeah those B2's run very hot but are excellent chips, I think you will be alright but once you start getting into the 70's or high 60's you should back it down a bit.

Denny85 · *Last edited by Denny85; 04-20-2007 at 03:23.*

Quote:

Originally Posted by MrFox

Yeah those B2's run very hot but are excellent chips, I think you will be alright but once you start getting into the 70's or high 60's you should back it down a bit.

70's 60's you mean idle or load?

Denny85 · 04-20-2007, 03:23 | posts: 1,001 | Location: Planet Earth

and one more thing. Any suggestion about my memory?

756Mhz 5-5-5-12 v1.9 ??

add more speed or latency?

Xenoasd · 04-20-2007, 03:28 | posts: 376 | Location: Canada

not bad, did u try pushing it more? and yeah your temp seems funny o.O u sure u properly mounted the scythe ninja?

Denny85 · 04-20-2007, 03:37 | posts: 1,001 | Location: Planet Earth

Quote:

Originally Posted by Xenoasd

not bad, did u try pushing it more? and yeah your temp seems funny o.O u sure u properly mounted the scythe ninja?

remounted 3 times. it's my chip ! whatever i think it's safe.

momomo67890 · 04-20-2007, 03:38 | posts: 2,663 | Location: Austin Tx

Wow thats Really bad temps im geting lower then that with my tuniq just layying ontop of my chip and its @ 1.49v

Your Temp is WAy to high but that is still good try and push it more

andersondiaz · 04-20-2007, 03:43 | posts: 394 | Location: venezuela

is a little hot I have tuniq tower and idle is 36 load no pass of 54....put as5

Denny85 · *Last edited by Denny85; 04-20-2007 at 04:00.*

allright i'll try to remount it 4 the last time.

ohh i've set my mem on 1008Mhz 5-5-5-12 v2.1
ran 3dmarko5
3.4Ghz v1.39
1008Mhz 5-5-5-12 v2.1

safe?
Stock 8800Gtx

Denny85 · 04-20-2007, 04:12 | posts: 1,001 | Location: Planet Earth

Quote:

Originally Posted by andersondiaz

is a little hot I have tuniq tower and idle is 36 load no pass of 54....put as5

as5! maybe you wanna share your trick? how do i put as5?

SolidBladez · 04-20-2007, 04:17 | posts: 3,721 | Location: CO

Quote:

Originally Posted by Denny85

as5! maybe you wanna share your trick? how do i put as5?

I hope you applied some sort of thermal grease.

Anyways, here is the proper way to apply AS5 to your CPU:

http://www.articsilver.com/arctic_si...structions.htm

Mike.

momomo67890 · 04-20-2007, 04:18 | posts: 2,663 | Location: Austin Tx

trick is to put as little as possible

Xenoasd · 04-20-2007, 04:24 | posts: 376 | Location: Canada

its really odd. ... maybe u should get another heatsink like the thermalright ultra - 120 extreme or the zalman 9700led

Denny85 · 04-20-2007, 05:39 | posts: 1,001 | Location: Planet Earth

Quote:

Originally Posted by Xenoasd

its really odd. ... maybe u should get another heatsink like the thermalright ultra - 120 extreme or the zalman 9700led

i have 2 zalmans 9500 and infinity.Great! ok now i'm gonna buy tuniq, zalman 9700 and 120 extreme !!! that's a lotta money