3dmark 200se.........ummm

Deezul · 05-22-2002, 04:42 | posts: 50

here are my specs: 
Inno3d GF3 ti200 with crystal orb and arctic silver(not overclocked), WinXp home,Latest drivers from nvidia's site. Asus A7m266 mainboard with 1.07bios, 512ddr crucial ram, 1.4ghz t-bird, 80 and 40 and 60gb maxtors, Promise ata 133 controller, SB Live! , compaq p700 monitor 17" with sony internals(does 1600x1200) 
 
I get 6001 in 3dmark 2001se ..is this bad? If so what can I do to improve ? I know i can overclock .right now my card is at 175/400 i believe...I put a thermaltake crystal orb and arctic silver 2 on it just in case.......please help TIA 
 
 
 
PS i meant 2000se oops lol This message was edited by Deezul on 21 May 2002 08:43 PM

05-22-2002, 04:44 | posts: n/a

Thats low for your system. Download the latest VIA 4IN1 DRIVER. What detonator driver U using ?

radosuaf · 05-22-2002, 07:57 | posts: 1,258 | Location: Poland

geeee.. it's a sin not to overclock with such cooling... <IMG SRC="smileys/wink.gif"> your score is much too low though, I believe....

05-22-2002, 10:35 | posts: n/a

my friend have Leadtek GF3 Ti 200 at 255/240,his FSB is at 195 Mhz (some cool Epox motherboard) and his score in 3D Mark 2001 is 9070 <IMG SRC="smileys/biggrin.gif"> You have low score,should be somewhere at 7000+ <IMG SRC="smileys/suspect.gif">

Deezul · 05-22-2002, 15:19 | posts: 50

newest 4 in 1(non beta), newest amd miniport, and 28.90 dets(from inno3d).......i tried the 29.41 but my score dropped 1000pts(not a typo). AGP arp is 256mb. 
 
"""""Update....I did it again ang ot 4962!! I think i am gonna freak out........something is soooooooo WRONG. 
 
This message was edited by Deezul on 22 May 2002 07:20 AM This message was edited by Deezul on 22 May 2002 07:44 AM

Joshua · 05-22-2002, 22:09 | posts: 6,830 | Location: Seattle, WA

The agp aperature shouldn't be any higher than 128. You should only need it at 64 though.

Deezul · 05-23-2002, 01:02 | posts: 50

but whats that going to affect?.......

Deezul · 05-23-2002, 01:10 | posts: 50

tried 128 and 64 arp size....no diff................also GFtweak says i am at 175/400.........is that normal? I run a crystal orb and arctic silver 2 on the gf3......should i go higher? what kinda of risk am I running. Also that is secondary.......why am I only getting 4-5k with the stock clocking? please help I am going I N S A N E!!! This message was edited by Deezul on 22 May 2002 07:24 PM

Joshua · 05-23-2002, 18:09 | posts: 6,830 | Location: Seattle, WA

What OS are you running? And what drivers? Also, are you tweaking at all? Are fast writes enabled in the bios? What are your ram timings at? All these things can greatly affect your 3dmark score. . . .

Deezul · 05-23-2002, 18:24 | posts: 50

ram stock riming 2.5/3/3 i believe , runnin winxp, 28.32 drivers, not much tweaking as I cant get rid of texture flicker in my d3d games right now cuz I turned SOMETHING on or changed something I shouldnt have,,,,,,,,,,,

Joshua · 05-23-2002, 18:35 | posts: 6,830 | Location: Seattle, WA

texture flicker? You probably just disabled vsync. but you'll wanna leave that off for benching. Did you apply the refresh rate fix for you drivers? Also, you'll want your ram timings at 2-2-2 for max performance.