Guru3d SuperPI 1M Records - Page 5

glenboy · *Last edited by glenboy; 06-17-2006 at 02:22.*

[hwbot] 27.56 - Opteron 165 @ 3.10ghz on water @1.47 volts - 2 x 512 mb corsair xpert xl @ 2.5 6 4 3 @ 282 fsb [/hwbot]

cpuz and clock gen, yes i seem to be collecting the new folders at the moment just can't seem to find the delete key

compgeek89 · 06-17-2006, 01:53 | posts: 4,769 | Location: On the Cutting Edge of Technology

Hey glenboy, nice score, but I think listing your RAM would be better in Super PI, instead of graphics cards

Also, having CPU-Z open in the SS would help too

llerenaprincipe · 06-17-2006, 01:59 | posts: 7,506 | Location: Carrollton,Ky

he's got a lot of new folders eh?

compgeek89 · 06-17-2006, 02:07 | posts: 4,769 | Location: On the Cutting Edge of Technology

lol, yea....

glenboy · 06-17-2006, 02:37 | posts: 1,182 | Location: UK

[hwbot] 27.50 - Opteron 165 @ 3.13ghz on water @1.47 volts - 2 x 512 mb corsair xpert xl @ 2.5 6 4 3 @ 284 fsb [/hwbot]

howzat shaved a few hundredths off

compgeek89 · 06-17-2006, 02:40 | posts: 4,769 | Location: On the Cutting Edge of Technology

VERY nice

glenboy · *Last edited by glenboy; 06-17-2006 at 02:55.*

hey compgeek you have caused some stirrings with your conroe , i would imagine it takes a bit of getting used to a new motherboard / processor format as i remember when i got the dfi board the bios looked like gobbledygook, i think a lot of people are going to move over to the dark side (intel) i am personally going to wait till the dfi board comes out for the conroe and then jump in , i really like the idea of some ddr2 8500 ram

compgeek89 · 06-17-2006, 02:54 | posts: 4,769 | Location: On the Cutting Edge of Technology

it was actually pretty straightforward, not much getting used to.

i love it, but im going to get a later revision soon.

glenboy · 06-17-2006, 03:00 | posts: 1,182 | Location: UK

yes you have done well with it

catch you later

Blaise · *Last edited by Blaise; 06-17-2006 at 03:14.*

[hwbot] 28.266 - FX60 @ 3.0GHz @1.42 volts water - TWINX2048-3500LL PRO 2.5-3-2-6-1T 1:1 @DDR500 2.8 volts [/hwbot]

The above score was done with one core only, with 2 cores it was a bit higher (28.375).

doublee · **Memory**: 24 Gb 9-10-9-27 @ 1840

[hwbot] 26.657 - PM740 @ 2.835ghz vcore 1.584V - xp-90c - 3500LL pro @ 2.5 2 3 5 @ 236 fsb [/hwbot]

*edit* LOL... hwbot turned my pm740 into a celeron m 350.....

compgeek89 · 06-17-2006, 04:03 | posts: 4,769 | Location: On the Cutting Edge of Technology

@ Blaise, we only run one instance

@ doublee, ooooh aaaah

Blaise · 06-17-2006, 10:14 | posts: 1,278 | Location: Sydney, Australia

@compgeek89 - what I meant was the second core was disabled

compgeek89 · 06-17-2006, 13:32 | posts: 4,769 | Location: On the Cutting Edge of Technology

oh, lol, cheater!

I havent tried that yet...

Eric1987 · 06-17-2006, 14:36 | posts: 1,822 | Location: California

lol compgeek how did you get NVIDIA running on intel?

compgeek89 · 06-17-2006, 14:57 | posts: 4,769 | Location: On the Cutting Edge of Technology

It's a secret

kwak · 06-17-2006, 15:30 | posts: 6,569 | Location: Galactic Sector QQ7 Active J Gamma

nice doublee. what timings were you running on the mem? dothan can get an enourmous increase if you give it more bandwith.

Eric1987 · 06-17-2006, 15:38 | posts: 1,822 | Location: California

I wanna know because I wont switch to intel if I cant SLI

compgeek89 · 06-17-2006, 15:50 | posts: 4,769 | Location: On the Cutting Edge of Technology

Im not authorized to share these drivers.

ArCElM · 06-17-2006, 16:14 | posts: 1,434 | Location: The Octagon

Thought id give it a quick shot. 30.924

doublee · **Memory**: 24 Gb 9-10-9-27 @ 1840

Quote:

Originally Posted by kwak

nice doublee. what timings were you running on the mem? dothan can get an enourmous increase if you give it more bandwith.

fsb 236x12 1:1 (only super pi) 234x12 for 3dxx, 228 for gaming...
Have tried variants like:
fsb 250x11 1:1 , 254x11 = crash
the above with 2.5 2 3 5 settings.

I'm not sure but I believe that the chipset is the bottleneck, amd mobos apparently oc much better with memory...
My system gets hickups when the bus speed starts to exceed 990 MHz.
Maximal vcore for the cpu is 1.6 in the bios. With some volt modding I might get 1.7 or 1.8 before frying it, my xp-90c can handle some more heat, other components may not...

I would appreciate some tips to get up the bandwidth though, now it tops at 5000+ with sandra.
The 3500LL is completely immune against voltage changes, 2.65 or 2.85 no diff...

The x12 multiplier has worked out the best so far and it gives me 2.83gig on the cpu. Have also tried 237x12 but that was like riding Tjernobyl...

Eric1987 · 06-17-2006, 18:33 | posts: 1,822 | Location: California

authorized? lollerskates

compgeek89 · 06-17-2006, 18:36 | posts: 4,769 | Location: On the Cutting Edge of Technology

Yep, seriously, they are private. Im under NDA

Eric1987 · 06-17-2006, 19:08 | posts: 1,822 | Location: California

Can I ask why?

06-17-2006, 19:13 | posts: n/a

Quote:

Originally Posted by Eric1987

Can I ask why?

When you have access to hardware that is currently not available to the general public you are usually placed under an NDA as to not give everybody innacurate perceptions on the new hardware. Because a lot of the time there is a last minute revision before the product goes out the door.