duron multiplier

i have a duron at 800 with a mother GA-7ZM <br>
can i chance the multiplier {iis 8x)to something else?how?<br>
i dont wan to overclock it all i want its to run close to my memory 133h speed.

<BLOCKQUOTE>quote:<HR>Originally posted by flevio:<br>
<b>i have a duron at 800 with a mother GA-7ZM <br>
can i chance the multiplier {iis 8x)to something else?how?<br>
i dont wan to overclock it all i want its to run close to my memory 133h speed.</b><HR></BLOCKQUOTE><br>
<br>
oh so you want it to be like 133x6=798mhz?<br>
durons and older athlons are known for their "lacking stability" of fsb overclocks. I can only get my 700 duron stable at 105mhz max. i got it now at 10x103mhz=1030....heheh<br>
also....another note. this is how you'd have to do it if you really wanted to<br>
<br>
1-unlock your L1 bridges on your duron with a pencil<br>
2-since you're overclocking the fsb it still is overclocking so i'd suggest investing in some arctic silver 2 paste and a decent heatsink/fan<br>
3-chagne your memory to 100mhz, because whatever you change your system fsb to it will not only affect your cpu it will also affect your memory i.e. 800(8x100)cpu, 100memory----798(6x133)cpu, 133cpu.see what i'm saying<br>
4-take it one mhz at a time and watch your temp.<br>
5-also about the fsb change you'll also be afffecting your pci and agp buses. you better hope your soundcard, videocard and any other card in your pc can handle the higher bus speeds.<br>
i think i'm done.....good luck<br><br><i>This message was edited by WeaZel on 13 Jun 2001 02:29 PM</i>

another thing...if you're looking for better performance change you memory from cas3 to cas2 in your BIOS. that should give you a little boost. increasing your cpu's fsb really won't affect your performance that much if you're only staying around 800mhz. you'd be better off to see what your processor will do. it could easily do 1ghz(10x100). you'd get a way better performance boost that way then going the 798(6x133) route. again good cooling is essential.

thanks i was comfused i was thinking that procecor at 799 isnt overclocked ,my mother doesnt support cas 2 for 133h and system runs faster with them(wy?3dmark is 100 points up!)i will try alitle later that pencil staff,i said later becose without a gts like you and only with my hercddvmx+1080+via 4.32+vsynth off,i can play all games at 1024 .768. but with the drivers problems in some of them(unrealtur..miltown2..)thats wy i was looking...<br>
thanks for the inlightenig,and udvise(sorry for the rong writing)<br>