Is there a problem with my CPU folding??

what v core are you using and what are your other voltage like

 

143 x 29 = 4150MHz
vCore Bios = 1.375
vCore Actual/Load = 1.352
DIMM Voltage = 1.65
QPI PLL = 1.1
CPU PLL = 1.8
IOH VCore = 1.1
CPU VTT Volt = 1.1
IOH/ICH I/O Volt = 1.5
ICH vCore = 1.1

I got it stable at 4.25GHz but the vcore was 1.4125 and thats above max spec. Absolute max I've read is 1.4 , Normal Max 1.35

 

try upping your cpu vtt 1.2 ioh vcore 1.2

these are the voltages that i used you can probably get a way with lower vcore if you up a few volt here that there on your mobo

By null at 2010-11-17

this is the guide that i followed to overclock http://www.techreaction.net/2010/09/07/3-step-overclocking-guide-bloomfield-and-gulftown/

 

Thanks for the info and the Link,

The screen shot showing the different names was the biggest help, I've been having trouble with the EVGA board coming from always having ASUS.

Debating if I should just run through the whole thing again, or just mess with the volts and cpu frequency at this point.

 

it very annoying that all the mobo company's don't use the same name for all the setting in the bois make you want to stay with on board maker.

right down your setting and then try from the beginning you maybe able to get a lot lower voltages

 

Looks like either I have a bad chip or you have a great chip,

Started from scratch

Round 1) (stopped because bclck was high enough)
153 BClck, 1.2 vCore , 1.25 QPI VTT (Ram and CPU Under clocked)

Round 2)
146 BClck, 1.2 vCore, 1.25 QPI VTT, 2:14 ram Ratio, for 2048MHz 9-9-9-30 timings

Round 3) [In Progress]
Best Stable per Linpack so far is;
146 BClck, 1.2875 vCore , 1.25 QPI VTT, 2:14 Ram for 2048 MHz 9-9-9-30, 27 Multiplier, CPU Frequency: 3.94GHz

~3.64GHz was my cap for 1.2 vCore it seems.

 

I QUIT CPU folding cause its SLOW and "pointless". ~500-1000ppd /day
WTF were they thinking????

 

it should be alot more than the what cpu?

 

X6 1090T BE stock 3.2GHz

 

that should be up to 9-10k are you using smp2 project or classic client one core projects in your task manager smp should using all of the core.

do you have HFM installed and does it have bonus calculator on

 

HMF?
Heading to city now...
brb sometimes "sometime"
time is irrelevant in new year

 

hehe have a good new years


HFM.NET - Client Monitoring Application for the Folding@Home Distributed Computing Project
http://code.google.com/p/hfm-net/

download link
http://code.google.com/p/hfm-net/downloads/detail?name=HFM Release 0.6.1.251.zip&can=2&q=

 

here u can see my points with cpu only.
http://folding.extremeoverclocking.com/user_summary.php?s=&u=279648

 

look to me like your not getting the bonus points have you got a passkey and have you completed the 10 smp wu that then allow you to get the bonus? you will need to keep a 80% success rate with out EUEs

 

fu.ck the bonus...
If its so hard to make it work... then it is...
I only keep working GPU..

 

look like you have done 4/5 out of 10 do keep at it for a few day to see if you start getting the bonus by the look of thingd your doing it right just hold in there

 

Dude I thought the same thing with my SMP I was all WTF but persistence = reward I'm now getting Bonus points pretty much doubled what I get for SMP WU's , and as your using a faster CPU than me your points would be even more