Afterburner 4.1.0 limiting OCs

Discussion in 'MSI AfterBurner Application Development Forum' started by pegasus1, Feb 4, 2015.

  1. pegasus1

    pegasus1 Ancient Guru

    Messages:
    5,188
    Likes Received:
    3,584
    GPU:
    TUF 4090
    780GTX running 347.25
    Previous versions of AB allows me to set any core speed (1215 stable) but the newest version limits me to 1145 irrespective of the setting.

    Im WCed and currently not even hitting 40c ingame, priority is set to temp.

    Any ideas if its a driver issue or AB.
     
  2. Cryengine

    Cryengine Member Guru

    Messages:
    178
    Likes Received:
    6
    GPU:
    Strix 1080 Ti oc
    Same problem here :
    Version GPU / Mem
    AB 4.0 : 1228 / 6800
    AB 4.1 : 1183 / 6800
     
  3. -Tj-

    -Tj- Ancient Guru

    Messages:
    18,103
    Likes Received:
    2,606
    GPU:
    3080TI iChill Black
    Hm I can OC the same 1215mhz, did you try newer 347.52 driver?


    Also try to lower vram OC a bit, sometimes certain drivers are more harsh on vram timings and fail at higher OC.

    Im running stock 1500mhz or it fails quick with any driver or MSI AB, max I can do it 100-130mhz on vram (12-14gb/s difference), so I've always kept it at stock and max out gpu OC.
     
    Last edited: Feb 23, 2015
  4. pegasus1

    pegasus1 Ancient Guru

    Messages:
    5,188
    Likes Received:
    3,584
    GPU:
    TUF 4090
    @Tj, I could put any number into the AB Core Clock slider but the card wouldn't go over 1145.

    I used DDU to remove everything NV, I uninstalled AB as well. I then installed 347.09 and AB 4.1.0 and all is good.
    Sine then ive used the AB voltage softmod to use 1.4mV and flashed the Bios so no more fluctuating core speed during gaming.

    Running 100% stable at 1241mhz at under 50C

    VRAM at stock, never bother to OC it.
     
    Last edited: Feb 23, 2015

  5. -Tj-

    -Tj- Ancient Guru

    Messages:
    18,103
    Likes Received:
    2,606
    GPU:
    3080TI iChill Black
    Ah I see, then its maybe some conflict with soft voltage mod?
     
  6. pegasus1

    pegasus1 Ancient Guru

    Messages:
    5,188
    Likes Received:
    3,584
    GPU:
    TUF 4090
    Ive modded it since. I cleared the issue by a complete uninstall of all NV drivers and AB. I use 347.09 which may have had something to do with it.
     
  7. Veteran

    Veteran Ancient Guru

    Messages:
    12,094
    Likes Received:
    21
    GPU:
    2xTitan XM@1590Mhz-CH20
    Im still on driver 347.09 and im still using MSI AB v4.00.
    No need to change as all works great as it is.
     

Share This Page