I've been reading a couple basic setup guides on using RT. I get started on setting fan speeds first in the low-level area. one for 30%, 40%, 60%, 80%, and 100%. Next I go to "hardware monitoring" and click the little red button in the lower left corner so it's highlighted and click "setup" I select "Core temp" and click setup to be taken to the "core temperature monitoring data source setup" menu. I set my Max value to 100.00 and min. to 20.000 then select both tray icon checkboxes then both guides I read say to hit the green + sign in the lower left corner and I don't have one? I also read a guide that says to use the OSD and I thought I needed to fill in the blank lines below that and hit the start server button and not I can't get it to stop. I rebooted several times with no luck. I notice I'm using nvidia drivers 169.21. maybe I'll try to update drivers as I thought the drivers were at 169.25 or higher when I checked on my other computer. Thanks for any help -=Mark=-
You're reffering to outdated guide, GUI has been changed in 2.07. Use new one: http://www.vaguesoft.com/index.php?pageid=rt207