Hi All, I cant seem to get the voltage limit unlocked. Is this an issue with the current AB? Max voltage is 1.224v, I have a custom bios up to 1.3v but cannot go past the old max. If I run a different bios with a fixed voltage over 1.224 it displays correctly (used one with 1.275v) I added VDDC_Generic_Detection = 1 in the .cfg file to unlock it, but this didn't make any difference.
You cannot go any higher than what you already have unless you do a hard mod or The Pencil mod. Im gonna do the pencil mod myself when i get a bit of spare time.
Yeah i need to get a multi meter to measure the current, worth doing if i can break 1600mhz which im sure i will.
Certainly. What I remember you were at 1550 so far, should be only two or three bins until you hit the 1600s Does the pencil thing only apply to the gpu voltage, or will it help with vram voltage too, probably helping vram oc?
Im at 1590 fully stable, its in my sig, wont go any higher on the core even after trying many different bioses. Not sure about the ram oc, i have my ram clocked at 650+ from stock.
I'm not sure I get it right, but what I see the TX's (reference) have 1750MHz stock, meaning you have 2400MHz? Wow! Impressive
Yeah ive got a good card here, ive not seen any go as high as mine without using di,pc or Ln. My 690 used to do 500 on the memory and it had a low asic of 63. Titanx has an asic of 78.3
op you should read the voltage with a dmm ab works just fine for what its advertised to do its starting to get chilly around here so I may fire up my modded tx's soon been using a 950 lately
