Guru3D.com Forums

Go Back   Guru3D.com Forums > Hardware > Processors and motherboards Intel
Processors and motherboards Intel Is that Core i7 or X99 chipset giving you a hard time? Enter this forum, this is all about Intel baby.



Reply
 
Thread Tools Display Modes
7600K what voltages would you recomend
Old
  (#1)
brothergc
Newbie
 
Videocard: 1060 6gb
Processor: 7650k
Mainboard: Asus Z-170E
Memory: 2x8 gb G skill ddr4
Soundcard: HT omega eclario
PSU: seasonic 550
Default 7600K what voltages would you recomend - 04-18-2017, 22:18 | posts: 15

running a 7600K @ 4.2 Ghz on all turbo cores I am looking for suggestions on vcore at this CPU . What would you consider a good , safe range ?
Thanks !
   
Reply With Quote
 
Old
  (#2)
lexer98
Master Guru
 
lexer98's Avatar
 
Videocard: GTX 1070 - WC
Processor: 4790k@4.5Ghz - WC
Mainboard: ASUS Z97-A
Memory: Corsair 16Gb - 2400mhz
Soundcard: Native Instrument Audio 2
PSU: Seasonic M12 750W
Default 04-19-2017, 00:08 | posts: 658 | Location: Argentina

At that frequency you can decrease the vcore and will remain stable.
Go to the BIOS, on the Vcore tab select "Adaptive" and set a negative offset. start with small values like -0.010v or if you want a more "old school" way Manual Vcore with LCC high. probably for 4.2Ghz will be around 1.1xxV.
Also you can play with the AVX offset. this options allow you to set a multiplier for AVX and NON-AVX apps. So you can overclock without going to aggressive with the vcore to make it stable in AVX scenarios.

My 4790k does 4.5ghz@all core with adaptive -0.065v.

Last edited by lexer98; 04-19-2017 at 00:17.
   
Reply With Quote
Old
  (#3)
kapu
Ancient Guru
 
kapu's Avatar
 
Videocard: MSI Geforce 1060 6gb
Processor: Intel i5 7600K @ 4.8Ghz
Mainboard: Gigabyte Z270-Gaming K3
Memory: Corsair Dual 16GB,3200mhz
Soundcard:
PSU: Be Quiet! E9 680W
Default 05-04-2017, 16:49 | posts: 3,712 | Location: Poland

My 7600k went 4.8Ghz without changing any settings ( just changed multi). I guess it will go over 5Ghz if i add some voltage ? Not may Overclocking reviews out there...
   
Reply With Quote
Old
  (#4)
H83
Maha Guru
 
H83's Avatar
 
Videocard: Asus ROG Strix GTX1070
Processor: I5 7600K @5.0Ghz (1.28V)
Mainboard: Asus ROG Strix Z270F
Memory: G.Skill DDR4 16G 3200Mhz
Soundcard: ROG SupremeFX
PSU: Corsair RM850i
Default 05-04-2017, 17:55 | posts: 1,873 | Location: Mars

I think that 1.35v is safe but ive read some guys that 1.4v and even 1.45v are also safe, dont know it its true...

Anyway, im can run my 7600K at 5.0Ghz with 1,27v without any problem. The max temps under load are bout 75/80 degrees and my cooler is a Noctua u12p se. And now im testing at 5.1Ghz with 1.30 and it seems fine too.

I would also like someone to offer a more conclusive answer about the 7600K max voltage to know how far i can go.
   
Reply With Quote
 
Old
  (#5)
PhantomCracking
Master Guru
 
PhantomCracking's Avatar
 
Videocard: XFX R7970 DD Ghz
Processor: i5-750 / Noctua U12P SE2
Mainboard: MSI P55-GD65
Memory: RipjawsZ 4x4GB
Soundcard: Xonar DG/ALC889 SPDIF
PSU: Corsair HX650
Default 05-05-2017, 08:39 | posts: 564 | Location: Tennessee

http://www.intel.com/content/www/us/...eet-vol-1.html

7.2 (pg.114)

I believe that's what you're looking for.
   
Reply With Quote
Old
  (#6)
H83
Maha Guru
 
H83's Avatar
 
Videocard: Asus ROG Strix GTX1070
Processor: I5 7600K @5.0Ghz (1.28V)
Mainboard: Asus ROG Strix Z270F
Memory: G.Skill DDR4 16G 3200Mhz
Soundcard: ROG SupremeFX
PSU: Corsair RM850i
Default 05-05-2017, 11:07 | posts: 1,873 | Location: Mars

Quote:
Originally Posted by PhantomCracking View Post
http://www.intel.com/content/www/us/...eet-vol-1.html

7.2 (pg.114)

I believe that's what you're looking for.
So the max voltage is 1,52v!??? Or im reading this the wrong way?
   
Reply With Quote
Old
  (#7)
PhantomCracking
Master Guru
 
PhantomCracking's Avatar
 
Videocard: XFX R7970 DD Ghz
Processor: i5-750 / Noctua U12P SE2
Mainboard: MSI P55-GD65
Memory: RipjawsZ 4x4GB
Soundcard: Xonar DG/ALC889 SPDIF
PSU: Corsair HX650
Default 05-06-2017, 00:41 | posts: 564 | Location: Tennessee

Shocked nobody else has chimed in..

Absolute max but I'd stay away from going near that. ..Just have sense when messing around with it, obviously. As far as what's the max safe vcc to run, I really can't say.
   
Reply With Quote
Old
  (#8)
brothergc
Newbie
 
Videocard: 1060 6gb
Processor: 7650k
Mainboard: Asus Z-170E
Memory: 2x8 gb G skill ddr4
Soundcard: HT omega eclario
PSU: seasonic 550
Default 05-09-2017, 13:56 | posts: 15

ok here is what I have done . I am using the offset method . I have it set to level 4 on my asus motherboard with a .4 offset , under full load that translates to 1.248 v and 60 Deg C cooling is on air with a coolermaster dual 90mm cpu fan cooler . pertty good yes ?

I tryed using the adaptive mode , but it felt underpowered , not very responsive . Since I swithched to offset the system now screams . Thanks to all who replied !
   
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump



Powered by vBulletin®
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
vBulletin Skin developed by: vBStyles.com
Copyright (c) 1995-2014, All Rights Reserved. The Guru of 3D, the Hardware Guru, and 3D Guru are trademarks owned by Hilbert Hagedoorn.