I got an error message on Event Viewer (I'm one of 'em Event Viewer paranoids) suggesting to check for memory errors. So I loaded up Memtest86 on an USB Flash disk and effectively one single error popped up after 4 passes. I repeated the test 3 more times and every time the same error came up. Why I'm saying this is weird? Because my system runs and behave totally stable, I do everything including gaming and using VMWare and there's not a single crash or even lockup or slowdown. Nothing. I ran down bad RAMs before and it always meant a lousy experience. So, what's the catch here? I'm was planning to upgrade to 16GB on July anyways, but now I'm not sure if the faulty RAM will get there or not. *confused*
Even 1 error detected means hardware failure. Find the defective stick and replace it. The errors can only get worse.
Try disabling XMP and rerun the tests. If it works, update your mobo BIOS and try re-renabling the XMP profile. edit: upgrade your BIOS anyway if you haven't yet. The Asus Z87 series has received numerous updates which enhance stability (the Maximus VI has the Z87 chipset).
Yep. On a stable system memtest should be able to run for hours on end with cores set to parallel without a single error.
Alright, this is getting even weirder. I ran the test again. I let it finish 3 passes and no errors came up. Then ran it again and that single 1-bit error happened in pass 4. It has always happened in test 8 in the same spot (4927MB). I noticed memetest86 was only using 1 core so I enabled all cores in parallel. Since all errors happen in test 8, I ran only test 8 for 5 passes and no errors. Next step would be to let it run overnight with all cores enabled in parallel and see. All this time and not a single crash, slowdown, hiccup has happened while using Windows 8.1 Pro. I'm considering to forget about this and enjoy my build.
more passes = more heat = more likely to generate errors. Let it run over night and see if the error repeats consistently.
It makes sense, but once it gets to that point, shouldn't it keep happening? It hasn't been the case. The error has always and exclusively happened in pass 4, but pass 5 comes up clean.
Well, I ran the test all night for 12 passes and not a single bleep. Here's what I changed: I upped the RAM voltage two steps and enabled all cores (parallel) in the test. Here's a summary:
Well, that's sounding positive, now just have to keep an eye on Event Viewer to see of the error message stops.
I always keep checking Event Viewer and the warning only appeared once last Thursday and never again. I guess I'll just chill out and use my rig with confidence. Anyways I'll be upgrading the CPU heatsink because the stock one is utter crap. Thanks guys for all the tips.
Good. The parallel is just to make sure you won't run into memory errors in multicore apps. I had broken ram before which only had problems in CSGO, VMWare Workstation and BF4. They all had 1 thing in common... all 3 applications had multicore support. Not a single error in single core mode but a ton in parallel.
Yeah. Thank you for the tip. I use VMware extensively for long periods of time and not a single blip.
I guess bad RAM is bad RAM. My system started crashing and now lots of errors are showing in memory test apps. I removed the bad RAM and unfortunately I will have to run 4GB on single channel until I can get a new kit, next month (tight budget). So it's true what they say: Even 1 single memory error is bad. RMA'ing is not an option because paying for shipping from the DR is almost as expensive as buying new RAM.
Not that I wanna bash Corsair but lately me and some colleagues had lots of issues with Corsair RAM, similar to yours. When I bought this PC I bought it with 8GB Vengeance 1600 Mhz RAM, it has been rock solid stable, memtest parallel even at 1866 Mhz. 3 years later I buy another set of the EXACT same type of ram (just a newer batch number of course) and I was suffering of issues very similar to you. I also have 8 GB of worthless ram lying around here.