Guru3D.com Forums

Go Back   Guru3D.com Forums > Videocards > 3D Stereo Gaming Section
3D Stereo Gaming Section In this stereo gaming section you can discuss everything 3D Goggles, monitors their drivers and graphics cards related.


Reply
 
Thread Tools Display Modes
Projector for Gaming
Old
  (#1)
campincarl2006
Newbie
 
Videocard: Nvidia EVGA 660
Processor: I7 930
Mainboard: P6T SE
Memory: 6 GB DDR 3
Soundcard: ThermalTake Headset
PSU: Corsair CX 600
Default Projector for Gaming - 01-08-2013, 15:12 | posts: 6

I am wanting to buy a projector for gaming but dont want to splash the cash out of the top of the range model, also i dont know much about projectors and there gaming support. My eyes are set on one projector at the moment but i dont know if it will be better than my current monitor.

http://www.scan.co.uk/products/acer-...00-lumens-22kg

my monitor is a 22" Hanns-G TFT
   
Reply With Quote
 
Old
  (#2)
FrenchKiss
Master Guru
 
FrenchKiss's Avatar
 
Videocard: MSI 680 GTX 2Go
Processor: Intel Core i7 860 @4ghz
Mainboard: Asus P7H57D-V EVO
Memory: 4Go G.Skill PC12800
Soundcard: Creative X-Fi Titanium
PSU: CMaster Silent Gold 700W
Default 02-07-2013, 15:23 | posts: 331 | Location: France

You can check 3D Vision and 3DTV Play compatible device on the nvidia website.
I recently bought the Acer H9500BD projector and it performs quite well in 3d gaming. It is compatible with 3DTV Play, I use the 3D Vision infrared receptor and the projector glasses (not the nvidia one, it's only for 3D Vision, not 3DTV Play).

Playing 3D on 100" screen is just awesome! As for the H9500BD, the image quality is very good. I would say it just lacks a bit of brightness in 3D and colors are a bit green. Unfortunately like most of the affordable projector, it is limited to 720p@60hz (1080p is only 24hz). But the image is much more smooth on a projector that on a LCD screen so it's fine. Moreover, I'm running a single 680GTX and @720p 3D it has some difficulties to keep the 60fps stable. So 1080p would require SLI of 680GTX :S
   
Reply With Quote
Old
  (#3)
Mufflore
Ancient Guru
 
Mufflore's Avatar
 
Videocard: KFA2 Anarchy 580@930/4650
Processor: 2500K @ 4.5GHz - blew it!
Mainboard: Gigabyte P67 UD4 B3
Memory: 8G Kngston 2.2GHz CL11 1T
Soundcard: Minimax+ & Dexa Opamps !!
PSU: Corsair Pro AX750
Default 02-19-2013, 11:32 | posts: 9,769 | Location: UK

Beware of Epson if you value lamp life.
Their 4000hr bulbs dont even last 1000hrs before they start dimming/flickering badly and they barely last more than 1000hrs.
Tried 2, returned the projector.
But had to threaten the shop with court action because Epson wouldnt allow the return, despite them knowing that it is a general fault with the bulbs.
They are still selling the same bulbs!

Luckily I made enough use of the projector to find out within 6 months, many others arent so lucky.
   
Reply With Quote
projector gaming
Old
  (#4)
BungRTS
Newbie
 
BungRTS's Avatar
 
Videocard: GTX460 768MB Sli
Processor: 965BE @4.0GHz
Mainboard: Asus 990FX Sabretooth
Memory: 2x4GBGSkill 1600MHz
Soundcard: SB X-Fi+2.1 Phillips Spkr
PSU: PC Power and Cooling 750W
Thumbs down projector gaming - 05-21-2013, 16:10 | posts: 11 | Location: Newfoundland

i too use them for gaming, i just picked up a pair of BenQ MW516's to play with. i use the SoftTH program for my games(DX9 only so far) and that gives me the 2560x800 resolution im after- still working with aspect in the game so i havent fully set up the 2 proj yet. also just ordered the BenQ 3dglasses so will update when they arrive. my big question is how much vram im gonna need to run properly in 3D. right now im looking at the GTX670 4GB version. if 2 projectors arent feasible i have no problem just running the one proj. lots of lumens is good but i couldnt get over the diff the 10,000 : 1 contrast ratio has. this projector MW516 is at 91" right now and in 2D Crysis3 is simply awsum. as you can see im a bit limited to texture res and lotsa eye candy because of the 460's low VRAM. they still work great (faster than a 580 but no vram) due to the res of this new projector i do not need(i Hope) a high end card anymore. 2560x800 is lower than 1920x1080 so a decent mid-high card with min 3GB VRAM is good im hoping. the 460's push Crysis3 @1080 with low tex res and system on med settings but shadows on low with a min of 40FPS. heres a qwik view of how my vid cards went over the last 6 years.

8800GTX SLI (2007) on 680i mobo, GTX460 SLI (2010)on 680i then popped em into Asus Sabretooth 990FX last year.

lumens is great 2800 for this one bulb life is 6500hrs using smarteco mode which is how it's shipped and contrast is 10,000 : 1. i am very happy with the MW516 and recomend to anyone. loads of connections but the fans are a bit noisy (like it matters at gaming sound levels) or pop on a set of hdphones lol. staples had a screaming deal on them. picked up for 249.95 ea. thanks and happy gaming.
   
Reply With Quote
 
Old
  (#5)
Barry J
Maha Guru
 
Barry J's Avatar
 
Videocard: X2 EVGA 660ti SC SLi 3D
Processor: i5 4690K H100i @4.5 1.3v
Mainboard: Asus Z97 MAXIMUS VII Hero
Memory: 16GB 1600 4x4GB
Soundcard: onboard
PSU: EVGA SuperNOVA 1300w G2
Default 01-07-2014, 00:58 | posts: 1,644 | Location: Ipswich UK

I got a Optoma GT750 XL and its awesome. I use Optoma DLP ZD301 glasses awesome with blu ray 3D and gaming it is a short throw projector so I sit behind when I play games no shadows

Display Technology DLP
Native Resolution WXGA 1280 x 800
Brightness1 (Bright Mode) 3500 ANSI Lumens
Contrast 3000:1
ANSI Contrast 300:1
Noise Level (Eco mode) 27dB
Weight (kg) 2.97
I/O Connectors 2 x HDMI (v1.4a 3D), VGA (RGB/YPbPr), S-video, Composite video, Audio In RCA, Audio Out 3.5mm, 3D-Sync, RS232
Video Compatibility 1080p24/50/60, 1080i50/60, 720p50/60, 576p50, 480p60
Throw Ratio 0.72:1
Projection Screen Size 0.82 8.19m (32.24 - 322.41) Diagonal 16:10 Projection Distance 0.5 - 5m
Zoom Type Fixed
Keystone Correction 40 Vertical
Audio 2 x 5W
Dimensions (W x D x H) 324 x 234 x 97
Remote Control Back-lit IR
Power Supply 100 - 240V, 50 - 60Hz
Power Consumption 340W Max / <0.5W Standby
Operating Conditions Operating: 5 - 40***730;C, 85% Humidity (Max), 3000m Altitude (Max)
Standard Accessories 1 Pair ZD201 DLP-Link 3D Glasses, AC Power Cord, VGA to YPbPr adapter, Back-lit IR Remote, Batteries x 2, Lens cover, Carry Case, Quick Start Guide, CD User Manual, Warranty Card, WEEE Card Optional Accessories ZD201 DLP-Link 3D Glasses, 3D-RF System/Glasses
RoHS Compliant
3D Support 3D Playstation3/Xbox360 games, 3D Blu-ray, 3D Broadcasts (SKY 3D & Virgin 3D), Nvidia 3D-TV Play 3D Viewing Requires DLP-Link shutter-glasses - available
separately.

(The Optoma 3D-RF System/Glasses are also
supported - available separately.)
3D Compatibility HDMI 1.4a mandatory Formats:
Side-by-Side:1080i50 / 60, 720p50 / 60
Frame-pack: 1080p24, 720p50 / 60
Over-Under: 1080p24, 720p50 / 60
Speaker (Watts) 10
On Screen Display 17 Languages: English, German, French, Italian, Spanish, Portuguese, Polish, Dutch, Russian, Finnish, Swedish, Greek,Norwegian/Danish, Hungarian, Czech, Turkish, Arabic
Optional Wireless No
Features Bright gaming in the smallest of rooms
Lamp Life (Eco/Bright Mode) 4000/2500

http://www.optoma.co.uk/projectordet...nt&PC=GT750-XL

Last edited by Barry J; 01-07-2014 at 01:09.
   
Reply With Quote
Old
  (#6)
stereoman
Member Guru
 
stereoman's Avatar
 
Videocard: GTX 670 SLI + 460 physx
Processor: 4790K @ 4.7ghz
Mainboard: Asus Maximus VII Hero
Memory: 8GB Ballistix SmartTracer
Soundcard: Avid MBOX 3 + KRK ROKIT 5
PSU: CM Silent Pro 1000W
Default 01-13-2014, 20:31 | posts: 125

If you are looking for something cheap you can pick up an Acer X110P on ebay for next to nothing, I got one for under 100 a few years ago, it's not officially supported with 3D Vision but works perfectly once you do the EDID Overide, max res isn't great tho 1280x720 @120hz, still when i'm playing on an 80 inch screen i'm not sitting that close to care and the 3D is awesome.
   
Reply With Quote
Old
  (#7)
rocknrolla12
Newbie
 
Videocard: Gigabyte R9
Processor: AMD Phenom
Mainboard:
Memory:
Soundcard:
PSU: corsair cxm750m
Default 03-29-2014, 21:20 | posts: 13

It's pretty standard to get 3D on a projector these days, just like TV's whether you use it or not, the Epson TWEH6100 is a good bet for gaming and movies.
   
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off

Forum Jump



Powered by vBulletin®
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
vBulletin Skin developed by: vBStyles.com
Copyright (c) 1995-2014, All Rights Reserved. The Guru of 3D, the Hardware Guru, and 3D Guru are trademarks owned by Hilbert Hagedoorn.