Hello guys... i have this MB http://www.asus.com/Motherboards/P8Z68V/ and this RAM http://www.kingston.com/datasheets/HX321C11SRK2_8.pdf... Before this rams i`ve got http://www.price.ro/specificatii_kingmax_hercules_ddr3,_2x2gb,_2200mhz_(flke8ddr322004g_k2)_261969.htm that worked a full power on xmp + CPU overclock... When i`ve bought the kingston 2x4gb... i put them all and turn the pc on... sems that they don`t get along each other and a let only the 2133 in the pc... but after that... neighter the kingmax or kingston can`t manage overclock or XMP on ram... separatly... Practicaly my CPU OC setup has vanish over my BIOS. I pull over the battery... reset CMOS ... multiply install bios rom. Useless... If anyone can have any ideea... please help. Thanks.
Your mixing memory from different manufacturers right? Probably not the best idea especially if you want to use xmp as the sub timings on xmp profiles are likely to be different which would cause problems. Ideally you should stick with identical sets.I take it both kits work ok by themselves?
The problem is that ...when i bought my 2x4 kingston 2133...my rams worked perfect....every kit separatly...but when i mixed them....the xmp don't work and when i changed to one pair neighter one work on XMP... and my CPU OC settings from bios vanish...before i was able to overclock the cpu separatly and the ram same....now only the multiplier can rise...and is not stable...is like my XMP profile is DEAD...strange fact...