I'm having trouble with the Overclocking feature in RC4. Maybe I'm doing something stupid, but I would enable hardware overclocking, and allow a reboot. After that, I would go in and manually crank up the core clock and memory. I would then click on "test", then "save", and finally "apply". However, after I exit and go back into "overclock," the settings would be back to default (except the "save" part). However, upon reboot, the "save" part would be blank.<br> <br> I've tried Detonator 12.00, 11.01, and 10.80 running on Windows 2000. I'm pretty sure the settings aren't kicking in since if I use 3DMark2001, I get the exact same results for all the combination.<br> <br> Any suggestions?<br> <br> Thanks,
<br> Hmm, <br> try this; set speeds, choose test, click apply, an then you should notice that the save button is blank. get out.<br> Get in again, and check if it is okay now.<br> <br> When you have rebooted the save button should be blank, because rivatuner thinks it has already changed speeds, only after adjusting would the save button be accessible again.<br> <br> If its doesnt set it, then Maybe the video adapter is not properly recognised, rivatuner can recognise it, but not change settings.<br> Does your adapter show up in rivatuner(startup screen)?<br> <br>
Thanks for the help.<br> <br> Still, no go. I change the speed, click on test, and then apply. However, the save button is still dark. I would exit back to the main screen, and click on system again. The frequency goes right back to 250MHz/458MHz.<br> <br> BTW, at the main screen, it says the target adapter is "NVIDIA GeForce2 Ultra"<br> <br> Thanks,
Hey, I noticed that Simpsons reference in the Power User setting. From a search, I take it that Bart and Homer are the default settings, and Krusty and Lisa are the current settings. Is this correct? How about Marge, what does she do?<br> <br> Maybe I just need to modify things here. What does all the number mean?<br> <br> Thanks,<br> <br>