Guru3D.com Forums

Go Back   Guru3D.com Forums > Hardware > Processors and motherboards AMD
Processors and motherboards AMD Got a Phenom, FX or AMD APU based system or the means to buy one? You can discuss it in here!



Reply
 
Thread Tools Display Modes
Old
  (#501)
OnnA
Ancient Guru
 
OnnA's Avatar
 
Videocard: Nitro Fiji-X HBM 1150/570
Processor: ZEN x8 k17 + Nepton 280L
Mainboard: ASUS Crosshair VI Hero
Memory: 16GB 3200 CL15 1T Ripjaws
Soundcard: SB-z Nichicon + Wood 5.1
PSU: Seasonic-X 750W Platinum
Thumbs up 03-18-2017, 22:57 | posts: 3,105 | Location: HolyWater Village

Quote:
Originally Posted by Pictus View Post
Congratz!
It does not accepted the previous RAID, but did you try to create a new?
Its a little buged now, If RAID BIOS shows all HDD as M.2

NP, i need to change my HDD for something New
   
Reply With Quote
 
Old
  (#502)
-Tj-
Ancient Guru
 
-Tj-'s Avatar
 
Videocard: ZOTAC GX980Ti Amp!Extreme
Processor: Intel i7 4770K OC 4.7GHz
Mainboard: ASUS Z87 Deluxe 2103
Memory: Gskill TridX 16GB 2400MHz
Soundcard: X-Fi Titanium HD @Bose A5
PSU: Nitro88+ 650W 52A
Default 03-19-2017, 00:31 | posts: 13,824 | Location: Proxima \/82

Quote:
Originally Posted by Ryu5uzaku View Post
153.8 avg and minimum was 63.4. 33830 points. With the ranking mode thingie.
Thanks , not bad for 4Ghz. similar to my score with cpu @ 4.7ghz and gpu 1420mhz; min 66, avg 155, 33967.

I also did a cpu test once and it stops scaling after 4.2ghz, got same score as at 4.7ghz.

Last edited by -Tj-; 03-19-2017 at 00:34.
   
Reply With Quote
Old
  (#503)
ddelamare
Master Guru
 
Videocard: Inno3D GTX 1070 X4
Processor: AMD Ryzen x1800
Mainboard: Asus Prime x370-PRO
Memory: G.Skill F4-3466C16D-16GTZ
Soundcard: Logitech 2.1 THX
PSU: OCZ ZX 1000W '80-Plus'
Default 03-19-2017, 00:42 | posts: 212 | Location: Rabbit

Prime x370 board owners, there is a new version of Aura available.

My version seemed a little buggy so ill try this out and see if it resolved my mobo and ram sync issues:

https://www.asus.com/uk/Motherboards...Desk_Download/
   
Reply With Quote
Old
  (#504)
Elder III
Ancient Guru
 
Elder III's Avatar
 
Videocard: 2 x GTX 1080 Ti 11 GB
Processor: R7 1700X 4.0 @ 1.425
Mainboard: AsRock X370 Fatal1ty
Memory: GSkill RGB 16GB 3200 CL14
Soundcard: Corsair VOID RGB
PSU: CM Silent Pro 1000W
Default 03-19-2017, 03:41 | posts: 3,278 | Location: Upstate New York

My new RAM arrived today.
G.SKILL - TridentZ RGB Series - F4-3200C14D-16GTZR

With the latest bios I actually made some progress for a change. This RAM actually has a XMP 3200 profile that can be selected. Sadly it would only boot about 40% of the time and was not at all stable. By selecting that same profile, but lowering the speed to 2933 (Auto Timings and Voltage) it boots reliably and has been stable thus far. The timings are abit weird and there may be room to fine tune them, but I ran out of time and am pretty pleased with it for the moment at least.

Below are the results of a few games I compared the difference in RAM speed and Game FPS.

Going from 4.00 Ghz 2133mhz to 4.00 Ghz 2933mhz @ 1080p -

Elder Scrolls Online = +23% (48 to 57 FPS in CPU Bound area)

Metro 2033 =
Old: New:
Average Framerate: 96.00 Average Framerate: 96.0
Max. Framerate: 216.45 Max. Framerate: 223.91
Min. Framerate: 7.01 Min Framerate: 13.78

Civilization VI = +8% (51.8 Avg to 56.2 Avg)

Hitman Absolution =

I didn't record the results before I reran the benchmark, so I don't recall the Min or Max at 2133mhz.

Old Avg FPS: 81

New:
Min FPS: 70.000000
Max FPS: 104.000000
Average FPS: 84.513962




CPUZ Validation Link:

http://valid.x86.fr/yxn882

Since it has been good at 4.00Ghz on all cores at 1.35v I will at some point try raising it to 4.1 or so, but for now I'll let it run a few days as is before testing it's upper limits.

Last edited by Elder III; 03-19-2017 at 03:51.
   
Reply With Quote
 
Old
  (#505)
Venix
Master Guru
 
Venix's Avatar
 
Videocard: Gigabyte Gtx 770 2gb
Processor: 3770k @ 4.3 ghz
Mainboard: Asus Z77 ...
Memory: G.Skill Sniper 4x4gb 1866
Soundcard: SoundBlaster Z
PSU: Corsair Gs 800
Default 03-19-2017, 06:02 | posts: 169 | Location: Greece

seems so when the ram timings get ironed out and some fixes patches etc the ryzen review gaming wise will tell a different story this is good to see !
   
Reply With Quote
Old
  (#506)
OnnA
Ancient Guru
 
OnnA's Avatar
 
Videocard: Nitro Fiji-X HBM 1150/570
Processor: ZEN x8 k17 + Nepton 280L
Mainboard: ASUS Crosshair VI Hero
Memory: 16GB 3200 CL15 1T Ripjaws
Soundcard: SB-z Nichicon + Wood 5.1
PSU: Seasonic-X 750W Platinum
Talking 03-19-2017, 15:15 | posts: 3,105 | Location: HolyWater Village

Hi

Now im on:

3.844GHz 1.26-1.3v (BLCk 107.600) / Temps 15-33deg cels.
Gskill at ~2800MHz (16-16-16-37 1T) 1.4v (rised BLCk at 2666)

BIOS is v.1001

~20k Physics in 3Dmark lol
~43GB/s in Aida RAM Test (R/W/C)
   
Reply With Quote
Old
  (#507)
Ryu5uzaku
Ancient Guru
 
Ryu5uzaku's Avatar
 
Videocard: 980ti gaming 1490/7700
Processor: 1800x 3.92ghz 1.3 v
Mainboard: Asus CH VI x370
Memory: 16GB 3ghz ddr4
Soundcard: Asus strix pro
PSU: 850W SF platinum
Default 03-19-2017, 16:09 | posts: 6,633 | Location: Finland

Once they iron out ram things and I can actually use all 4 slots w/o lowering ram speesd I might just get full 64gb kit
   
Reply With Quote
Old
  (#508)
w0nderz
Member Guru
 
w0nderz's Avatar
 
Videocard: MSI GTX 980
Processor: AMD R7 1700
Mainboard: ASUS X370-Pro
Memory: GSKILL 3200 16GB
Soundcard: RTK ALC1220
PSU: CORSAIR AX860
Default 03-19-2017, 20:49 | posts: 136

Interesting info.

https://www.youtube.com/watch?v=m1amGwPnUuA
   
Reply With Quote
Old
  (#509)
OnnA
Ancient Guru
 
OnnA's Avatar
 
Videocard: Nitro Fiji-X HBM 1150/570
Processor: ZEN x8 k17 + Nepton 280L
Mainboard: ASUS Crosshair VI Hero
Memory: 16GB 3200 CL15 1T Ripjaws
Soundcard: SB-z Nichicon + Wood 5.1
PSU: Seasonic-X 750W Platinum
Talking 03-20-2017, 02:33 | posts: 3,105 | Location: HolyWater Village

Here have a cookie

http://valid.x86.fr/3ln5a8
   
Reply With Quote
Old
  (#510)
PhantomGamers
Member Guru
 
PhantomGamers's Avatar
 
Videocard: NVIDIA GTX 1080 EVGA FTW
Processor: AMD R7 1800X
Mainboard: ASRock Fatal1ty X370 Prof
Memory: DDR4 2x16GB @ 3200MHz
Soundcard: Realtek / Samson SR950
PSU: EVGA P2 1200W Platinum
Default 03-20-2017, 06:39 | posts: 74 | Location: New York, USA

Quote:
Originally Posted by Ryu5uzaku View Post
Once they iron out ram things and I can actually use all 4 slots w/o lowering ram speesd I might just get full 64gb kit
Sadly, as someone currently with a 2x16GB kit I purchased with the hope of futureproofing myself in case I needed more, I have my doubts that we'll even see 2 16GB sticks running at their advertised speeds let alone 4.

I'm stuck at 2400MHz right now, even though my RAM is rated for 3200, 2666 doesn't even boot consistently at the 3200 voltages and timings
   
Reply With Quote
Old
  (#511)
Ryu5uzaku
Ancient Guru
 
Ryu5uzaku's Avatar
 
Videocard: 980ti gaming 1490/7700
Processor: 1800x 3.92ghz 1.3 v
Mainboard: Asus CH VI x370
Memory: 16GB 3ghz ddr4
Soundcard: Asus strix pro
PSU: 850W SF platinum
Default 03-20-2017, 07:17 | posts: 6,633 | Location: Finland

Quote:
Originally Posted by PhantomGamers View Post
Sadly, as someone currently with a 2x16GB kit I purchased with the hope of futureproofing myself in case I needed more, I have my doubts that we'll even see 2 16GB sticks running at their advertised speeds let alone 4.

I'm stuck at 2400MHz right now, even though my RAM is rated for 3200, 2666 doesn't even boot consistently at the 3200 voltages and timings
In may we will see. Some Samsung sticks work at 3200mhz. My hynix work only at 2666
   
Reply With Quote
Old
  (#512)
Clouseau
Maha Guru
 
Clouseau's Avatar
 
Videocard: MSI RX 480 Gamming
Processor: Ryzen 1700X
Mainboard: ASUS Crosshair VI Hero
Memory: F4-3600C16D-16GTZ @ 3466
Soundcard:
PSU: Seasonic SSR-1200PD
Default 03-20-2017, 07:26 | posts: 1,804

Deleted

Last edited by Clouseau; 03-20-2017 at 07:29.
   
Reply With Quote
Old
  (#513)
PhantomGamers
Member Guru
 
PhantomGamers's Avatar
 
Videocard: NVIDIA GTX 1080 EVGA FTW
Processor: AMD R7 1800X
Mainboard: ASRock Fatal1ty X370 Prof
Memory: DDR4 2x16GB @ 3200MHz
Soundcard: Realtek / Samson SR950
PSU: EVGA P2 1200W Platinum
Default 03-20-2017, 07:29 | posts: 74 | Location: New York, USA

Quote:
Originally Posted by Ryu5uzaku View Post
In may we will see. Some Samsung sticks work at 3200mhz. My hynix work only at 2666
This is a 1x16GB stick? Are you sure it's stable at 2666?

Prior to this previous BIOS update to "improve memory compatibility," I was able to boot at 2666 consistently and even thought it was stable as it passed two passes of memtest (which took like 16 hours, otherwise I would have waited to make sure it passed more), yet my PC would shut down during certain workloads (Mad Max specifically crashed it, oddly enough, and with Ghost Recon Wildlands the game would crash constantly but not my computer, although I haven't necessarily confirmed that was the RAM's doing as I haven't tried since dropping to 2400, but Mad Max works fine at 2400)
   
Reply With Quote
Old
  (#514)
Ryu5uzaku
Ancient Guru
 
Ryu5uzaku's Avatar
 
Videocard: 980ti gaming 1490/7700
Processor: 1800x 3.92ghz 1.3 v
Mainboard: Asus CH VI x370
Memory: 16GB 3ghz ddr4
Soundcard: Asus strix pro
PSU: 850W SF platinum
Default 03-20-2017, 10:45 | posts: 6,633 | Location: Finland

Quote:
Originally Posted by PhantomGamers View Post
This is a 1x16GB stick? Are you sure it's stable at 2666?

Prior to this previous BIOS update to "improve memory compatibility," I was able to boot at 2666 consistently and even thought it was stable as it passed two passes of memtest (which took like 16 hours, otherwise I would have waited to make sure it passed more), yet my PC would shut down during certain workloads (Mad Max specifically crashed it, oddly enough, and with Ghost Recon Wildlands the game would crash constantly but not my computer, although I haven't necessarily confirmed that was the RAM's doing as I haven't tried since dropping to 2400, but Mad Max works fine at 2400)
Nah 2x8gb, works perfect with 2666 but nothing over that. Which sticks do you have?

I got Vengeance LPX. Currently there are only handful that can reach 3200mhz and none of them are this set I have. Most ram kits are not validated yet.
   
Reply With Quote
Old
  (#515)
Webhiker
Master Guru
 
Webhiker's Avatar
 
Videocard: EVGA GTX 1080 SC Gaming
Processor: AMD Ryzen 7 1800X
Mainboard: Asus Prime X370-PRO
Memory: 32 GB TridentZ DDR4-3200
Soundcard: Realtek® ALC1220
PSU: Zahlman ZM-1000HP
Default 03-20-2017, 12:15 | posts: 253 | Location: Aarhus, Denmark

Quote:
Originally Posted by PhantomGamers View Post
Sadly, as someone currently with a 2x16GB kit I purchased with the hope of futureproofing myself in case I needed more, I have my doubts that we'll even see 2 16GB sticks running at their advertised speeds let alone 4.

I'm stuck at 2400MHz right now, even though my RAM is rated for 3200, 2666 doesn't even boot consistently at the 3200 voltages and timings
Have you tried 18-18-18-18-42 @ 2933 Mhz ?

I also got a 2 x 16 GB kit. (G.Skill TridentZ DDR4-3200 C14 DC) I can set it to 2933 MHz with 18 - 14 -14 -14 -34 and so far it works. (it's rated at 14-14-14-14-34) but no matter what I do I cannot get CRF below 18. But I'm confident it will be able to soon. We just need a new BIOS from ASUS.
   
Reply With Quote
Old
  (#516)
Ryu5uzaku
Ancient Guru
 
Ryu5uzaku's Avatar
 
Videocard: 980ti gaming 1490/7700
Processor: 1800x 3.92ghz 1.3 v
Mainboard: Asus CH VI x370
Memory: 16GB 3ghz ddr4
Soundcard: Asus strix pro
PSU: 850W SF platinum
Default 03-20-2017, 12:16 | posts: 6,633 | Location: Finland

Quote:
Originally Posted by Webhiker View Post
Have you tried 18-18-18-18-42 @ 2933 Mhz ?

I also got a 2 x 16 GB kit. (G.Skill TridentZ DDR4-3200 C14 DC) I can set it to 2933 MHz with 18 - 14 -14 -14 -34 and so far it works. (it's rated at 14-14-14-14-34) but no matter what I do I cannot get CRF below 18. But I'm confident it will be able to soon. We just need a new BIOS from ASUS.
You got samsung ram I think? While I got corsair sticks with hynix. 1001 bios for me should allow my ram to be set to 2933 with the normal timings of 15 - 15 -15 -15 -3x.
   
Reply With Quote
Old
  (#517)
Kanuki
Newbie
 
Videocard: Sapphire R9 290 Tri-X OC
Processor: AMD Ryzen 7 1700X
Mainboard: ASUS Crosshair VI Hero
Memory: DDR4 16GB (8GBx2)
Soundcard: ASUS HDAV 1.3 Deluxe
PSU: Acble R9 1100W Gold
Default 03-20-2017, 15:29 | posts: 34 | Location: Cyberjaya

Hi.. All.

I'm using R7 1700X with Crosshair VI Hero (BIOS v1001)
and Corsair Vengeance LED 16GB (8GBx2) 3000MHz CL15.

Right now my RAM stuck at 2666MHz 14-14-14-14-30 by
only set DRAM voltage to 1.35v.


Any advice?
   
Reply With Quote
Old
  (#518)
OnnA
Ancient Guru
 
OnnA's Avatar
 
Videocard: Nitro Fiji-X HBM 1150/570
Processor: ZEN x8 k17 + Nepton 280L
Mainboard: ASUS Crosshair VI Hero
Memory: 16GB 3200 CL15 1T Ripjaws
Soundcard: SB-z Nichicon + Wood 5.1
PSU: Seasonic-X 750W Platinum
Talking 03-20-2017, 16:02 | posts: 3,105 | Location: HolyWater Village

Quote:
Originally Posted by Kanuki View Post
Hi.. All.

I'm using R7 1700X with Crosshair VI Hero (BIOS v1001)
and Corsair Vengeance LED 16GB (8GBx2) 3000MHz CL15.

Right now my RAM stuck at 2666MHz 14-14-14-14-30 by
only set DRAM voltage to 1.35v.


Any advice?
Wait for BIOS, i have Gskill 3200 CL16-16 and can't go beyond 3066MHz ATM


But it's fast regardless

Solid rock stable for me is:
2800MHz CL16-16-16-37 1T 1.4v

Last edited by OnnA; 03-20-2017 at 16:07.
   
Reply With Quote
Old
  (#519)
FedericoUY
Newbie
 
FedericoUY's Avatar
 
Videocard: Gtx 1080
Processor: Intel i7 7700k
Mainboard: Asus MIXA
Memory: GSkill TridentZ 3600c15
Soundcard: SB zX
PSU: EVGA 1300w G2
Default 03-20-2017, 17:16 | posts: 29 | Location: Uruguay

What speed are samsung bdies reaching on this platform?
   
Reply With Quote
Old
  (#520)
Clouseau
Maha Guru
 
Clouseau's Avatar
 
Videocard: MSI RX 480 Gamming
Processor: Ryzen 1700X
Mainboard: ASUS Crosshair VI Hero
Memory: F4-3600C16D-16GTZ @ 3466
Soundcard:
PSU: Seasonic SSR-1200PD
Default 03-20-2017, 17:38 | posts: 1,804

Amazon is finally shipping the board. Will be here exactly one month after the pre-order was placed. Ram will get here Wednesday as well. Will finally have a fun project this weekend.

Because of being persistent and understanding, the deal struck is netting out to the board actually being free and the 1700X was two dollars off. The will make the wait worth it.

Last edited by Clouseau; 03-20-2017 at 17:44.
   
Reply With Quote
Old
  (#521)
chispy
Ancient Guru
 
chispy's Avatar
 
Videocard: GTX1080Ti @ 2126/6156 H2O
Processor: Ryzen 1700x @ 4102Mhz H2O
Mainboard: Asus CH VI Hero x370 AM4
Memory: DDR4-16GB @ 3555Mhz
Soundcard: X-Fi Titanium HD
PSU: eVGA Supernova G2-1300w
Default 03-20-2017, 17:45 | posts: 7,813 | Location: In Paradise :)

Quote:
Originally Posted by FedericoUY View Post
What speed are samsung bdies reaching on this platform?
Infrared at hwbot -
http://forum.hwbot.org/showthread.php?t=167530&page=14
   
Reply With Quote
Old
  (#522)
chispy
Ancient Guru
 
chispy's Avatar
 
Videocard: GTX1080Ti @ 2126/6156 H2O
Processor: Ryzen 1700x @ 4102Mhz H2O
Mainboard: Asus CH VI Hero x370 AM4
Memory: DDR4-16GB @ 3555Mhz
Soundcard: X-Fi Titanium HD
PSU: eVGA Supernova G2-1300w
Thumbs up 03-20-2017, 17:52 | posts: 7,813 | Location: In Paradise :)

Quote:
Originally Posted by Kanuki View Post
Hi.. All.

I'm using R7 1700X with Crosshair VI Hero (BIOS v1001)
and Corsair Vengeance LED 16GB (8GBx2) 3000MHz CL15.

Right now my RAM stuck at 2666MHz 14-14-14-14-30 by
only set DRAM voltage to 1.35v.


Any advice?
Can you tell me exactly the model number alongside the timings on the spd and voltage rated ? I would like to know if the are Hynix double sided or Samsung die single sided. Post that info i might be able to help you.

Quote:
Originally Posted by OnnA View Post
Wait for BIOS, i have Gskill 3200 CL16-16 and can't go beyond 3066MHz ATM


But it's fast regardless

Solid rock stable for me is:
2800MHz CL16-16-16-37 1T 1.4v
Glad you are happy so far , Bios updates makes a huge difference.

Quote:
Originally Posted by Clouseau View Post
Amazon is finally shipping the board. Will be here exactly one month after the pre-order was placed. Ram will get here Wednesday as well. Will finally have a fun project this weekend.

Because of being persistent and understanding, the deal struck is netting out to the board actually being free and the 1700X was two dollars off. The will make the wait worth it.
Nice to hear that , awesome news free board , you will enjoy it very much.



Well , this are my 24/7 stable settings - Ryzen R7 1700x @ 4.2Ghz , memory at DDR4-3200 14-14-14-32 1T , Complete memory information ( Samsung B-die ) G.SKILL Ripjaws V Series 16GB (2 x 8GB) 288-Pin DDR4 SDRAM DDR4 3200 (PC4 25600) Desktop Memory Model F4-3200C15D-16GVR



Last edited by chispy; 03-20-2017 at 18:05.
   
Reply With Quote
Old
  (#523)
SplashDown
Master Guru
 
SplashDown's Avatar
 
Videocard: EVGA 980ti Classy@1500
Processor: AMD 8350 @ 4.7 XSPC RX240
Mainboard: ASRock 990FX Extreme 9
Memory: King HyperX Beast 2133CL9
Soundcard: Realtek 7.1 & 1000w Reciv
PSU: Cooler Master Silent 1000
Default 03-20-2017, 17:59 | posts: 402 | Location: Michigan

delte

Last edited by SplashDown; 03-20-2017 at 18:07.
   
Reply With Quote
Old
  (#524)
Whiplashwang
Maha Guru
 
Whiplashwang's Avatar
 
Videocard: GTX 1080 G1
Processor: AMD R5 1600X - NH-D15S
Mainboard: ROG Crosshair VI Hero
Memory: 16GB Flare X 3200MHz CL14
Soundcard: Sound Blaster Z
PSU: Corsair TX850W
Default 03-20-2017, 18:02 | posts: 2,138 | Location: Earth

 Click to show spoiler



Wow! What memory kit is he using? That's impressive!
   
Reply With Quote
Old
  (#525)
OnnA
Ancient Guru
 
OnnA's Avatar
 
Videocard: Nitro Fiji-X HBM 1150/570
Processor: ZEN x8 k17 + Nepton 280L
Mainboard: ASUS Crosshair VI Hero
Memory: 16GB 3200 CL15 1T Ripjaws
Soundcard: SB-z Nichicon + Wood 5.1
PSU: Seasonic-X 750W Platinum
Lightbulb 03-20-2017, 22:43 | posts: 3,105 | Location: HolyWater Village



http://valid.x86.fr/9jtn9j

When full load (DeusEx MkD) is stable at ~1.373-1.395v at 4.018Ghz/2800MHz RAM (temps <36deg)

I can always push to 4.1GHz at 1.42v
   
Reply With Quote
Reply

Tags
am4, amd, memory, overclocking, ryzen

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump



Powered by vBulletin®
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
vBulletin Skin developed by: vBStyles.com
Copyright (c) 2017, All Rights Reserved. The Guru of 3D, the Hardware Guru, and 3D Guru are trademarks owned by Hilbert Hagedoorn.