Guru3D.com Forums

Go Back   Guru3D.com Forums > Videocards > Benchmark Mayhem
Benchmark Mayhem This section is for you benchmark freaks. Wanna show off your 3D Mark scores with your brand new GTX 980 SLI or Radeon R9 290X Crossfire in that Intel Core i7 rig? Then this is your section!



Reply
 
Thread Tools Display Modes
Old
  (#101)
ricardonuno1980
Banned
 
Videocard: GTX 780Ti Classified :D
Processor: i5-2500K@4.5 CM212EVO
Mainboard: ASUS P8P67 REV 3.0
Memory: HyperX 2x4GB DDR3-1600
Soundcard: onboard
PSU: NOX 1000W
Default 01-21-2014, 15:42 | posts: 4,409 | Location: Carvalhos (Gaia)

@V@IO: your i5-3570K gets normal but excellent because you're faster than my i5-2500K@4.5GHz.

@V@IO and @-Tj-:
i7 = HT support while i5 = no HT support. For gaming, i5-2000,-3000 and -4000 have very good/excellent single core performances.

Last edited by ricardonuno1980; 01-21-2014 at 15:45.
   
Reply With Quote
 
Old
  (#102)
smartdroid
Newbie
 
Videocard: R9 290
Processor: Intel Core i7 4930K
Mainboard: RIVE
Memory: 16GB /2133 CL9
Soundcard:
PSU: AX1200I
Default 01-21-2014, 18:47 | posts: 17



My 2500K@5.3GHz

Not bad for a 3 year old cpu...but it's starting to show its age
   
Reply With Quote
Old
  (#103)
SLI-756
Banned
 
Videocard: 760 SLI 4gb 1215/ 6800
Processor: Devil's Canyon i5 @4.8
Mainboard: gigabyte z97 G1 Sniper
Memory: 8gb dominator gt @2400
Soundcard: asus xonar dx
PSU: EVGA SuperNova 1200 P2
Default 01-22-2014, 11:08 | posts: 7,604 | Location: Sunny Scotland

Quote:
Originally Posted by smartdroid View Post


My 2500K@5.3GHz

Not bad for a 3 year old cpu...but it's starting to show its age
I only score 680 is my cpu seriously borked? ..sry 5.3ghz.
   
Reply With Quote
Old
  (#104)
Extraordinary
Ancient Guru
 
Extraordinary's Avatar
 
Videocard: EVGA GTX980 SC ACX2.0 4GB
Processor: FX-8350 @ 4.8GHz / H100i
Mainboard: ASUS Crosshair V Formula
Memory: 12GB 2133 G.Skill
Soundcard: Creative SB1040 7.1
PSU: Corsair RM1000
Default 01-22-2014, 11:26 | posts: 17,039 | Location: 127.0.0.1

   
Reply With Quote
 
Old
  (#105)
V@IO
Master Guru
 
V@IO's Avatar
 
Videocard: GTX780Ti @ 1233/7400MHz
Processor: i7-3770K @ 4.3GHz (Air)
Mainboard: ASUS P8Z77-V LX2
Memory: 16GB Corsair 1600MHz
Soundcard: Creative Recon3D PCIe
PSU: Corsair HX750 Gold+
Default 01-23-2014, 21:47 | posts: 494 | Location: 30.0000 S, 25.0000 E

Quote:
Originally Posted by SLI-756 View Post
I only score 680 is my cpu seriously borked? ..sry 5.3ghz.
LoL i thought the same till i saw it was @ 5.3GHz, i was sad then i was happy
   
Reply With Quote
Old
  (#106)
Extraordinary
Ancient Guru
 
Extraordinary's Avatar
 
Videocard: EVGA GTX980 SC ACX2.0 4GB
Processor: FX-8350 @ 4.8GHz / H100i
Mainboard: ASUS Crosshair V Formula
Memory: 12GB 2133 G.Skill
Soundcard: Creative SB1040 7.1
PSU: Corsair RM1000
Default 01-23-2014, 22:09 | posts: 17,039 | Location: 127.0.0.1

Quote:
Originally Posted by smartdroid View Post


My 2500K@5.3GHz

Not bad for a 3 year old cpu...but it's starting to show its age
Why does Cinebench say 3.30 GHz ?
   
Reply With Quote
Old
  (#107)
smartdroid
Newbie
 
Videocard: R9 290
Processor: Intel Core i7 4930K
Mainboard: RIVE
Memory: 16GB /2133 CL9
Soundcard:
PSU: AX1200I
Default 01-24-2014, 00:27 | posts: 17

Because that is the CPU base clock...5.3 is the turbo speed.

My 4930K@4.9GHz


Last edited by smartdroid; 01-24-2014 at 00:37.
   
Reply With Quote
Old
  (#108)
V@IO
Master Guru
 
V@IO's Avatar
 
Videocard: GTX780Ti @ 1233/7400MHz
Processor: i7-3770K @ 4.3GHz (Air)
Mainboard: ASUS P8Z77-V LX2
Memory: 16GB Corsair 1600MHz
Soundcard: Creative Recon3D PCIe
PSU: Corsair HX750 Gold+
Default 01-24-2014, 21:31 | posts: 494 | Location: 30.0000 S, 25.0000 E

i7 975X @ 4.14GHz



i5-3570k @ 4.4GHz


Last edited by V@IO; 01-24-2014 at 21:35.
   
Reply With Quote
Old
  (#109)
sTOrM41
Master Guru
 
Videocard: GTX 970 @ 1500 MHz
Processor: Xeon W3680 @ 4000 MHz
Mainboard: Dell X58
Memory: 12GB DDR3 @ 1333 MHz
Soundcard:
PSU: Dell 525W
Default 01-25-2014, 14:54 | posts: 491 | Location: Germany

FX-8320@5ghz

767 Points
   
Reply With Quote
Old
  (#110)
Lane
Ancient Guru
 
Videocard: 2x HD7970 - EK Waterblock
Processor: I7 4930K H2o EK Supremacy
Mainboard: Asus X79 Deluxe
Memory: G-Skill C9 2133mhz 16GB
Soundcard: X-FI Titanium HD + SP2500
PSU: CM 1000W
Default 02-08-2014, 15:27 | posts: 6,308 | Location: Switzerland

Just finally got my new EK Supremacy waterblock and new EK bay res D5 combo, so just for start, I7 4930K @4.7ghz. ( 16gb 2133mhz C9 )..

CPU batch ( 4,5ghz 1,22Vcore ); L3337C092 E4 ( malay fundry series )
( second reference score of the 4930K: 1207 = 4.5ghz )



Last edited by Lane; 02-08-2014 at 17:06.
   
Reply With Quote
Old
  (#111)
smartdroid
Newbie
 
Videocard: R9 290
Processor: Intel Core i7 4930K
Mainboard: RIVE
Memory: 16GB /2133 CL9
Soundcard:
PSU: AX1200I
Default 02-08-2014, 17:31 | posts: 17

nice one, it seems that chip is slightly above average.
   
Reply With Quote
Old
  (#112)
Mydog
Member Guru
 
Mydog's Avatar
 
Videocard: GTX Titan X SLI
Processor: Intel Core i7 5960X
Mainboard: Asus Rampage V Extreme
Memory: G.Skill RipjawsZ 3200 MHz
Soundcard:
PSU: Corsair AX 1200
Default 02-08-2014, 18:46 | posts: 106 | Location: Oslo, Norway

Nice low voltage for 4.5 GHz
My 4960X needs 1.23 vcore for 4.5 GHz
   
Reply With Quote
Old
  (#113)
Lane
Ancient Guru
 
Videocard: 2x HD7970 - EK Waterblock
Processor: I7 4930K H2o EK Supremacy
Mainboard: Asus X79 Deluxe
Memory: G-Skill C9 2133mhz 16GB
Soundcard: X-FI Titanium HD + SP2500
PSU: CM 1000W
Default 02-08-2014, 19:03 | posts: 6,308 | Location: Switzerland

Not so much above average, 5ghz will require some juice..i have seen after 4.9ghz, the vcore need is way higher of what i was expect.. i will definitively class it in the average group in term of batch... not a bad batch.. but not a golden chips too. ( i need conduct more test, the x79 deluxe bios are pretty new, and i was not use PLL overvoltage and voltage settings ).

This type of batch are pretty new, i have seen most I7 4930-4960x are coming from Costa Rica... and end on the 332b ( the most common batch ), this ones batch seems to pretty new ( 3337C and all finish by the " E4" )... we need more result from the malaysia fundry for get a larger idea of their binning quality.

Performance aside, im really glad of the work of Ek on their last waterblock on 2011 sockets... sadly the full nickel block was not available, and so i have need order this one. But well i dont think i loose so much performance in term of delta T ( water / air ) .

Note, im a bit worry about the D5 combo res bay.. i can feel the vibration of the pump when i put my hand on the reservoir.. the pump should bring a lot of energy ( so heat ) to the water this way.. ( but it is extremely practicable in use to dont have a pump, a separate reservoir, you remove 2 tubes from the loop and just connect the gpu's and the cpu, rad to the pump combo bay ).. Anyway, its a 24V vario D5.. and my system will be stable with it even at 30% of his power, so i can adapt the speed of the pump to the thermal transfer ) ..

The most funny is with this cpu, i can replace my 2 xeon workstations at work from the same series ( with lower clock ), on my autocad 3d render.. ( but it cant beat our farm of CPU we use for our renderer anyway )

Last edited by Lane; 02-08-2014 at 19:30.
   
Reply With Quote
Old
  (#114)
Mydog
Member Guru
 
Mydog's Avatar
 
Videocard: GTX Titan X SLI
Processor: Intel Core i7 5960X
Mainboard: Asus Rampage V Extreme
Memory: G.Skill RipjawsZ 3200 MHz
Soundcard:
PSU: Corsair AX 1200
Default 02-08-2014, 19:30 | posts: 106 | Location: Oslo, Norway

My 4960X dies out at 4.8 GHz with 1.45 vcore, 4.9 needs a lot more and suzero temps I think
   
Reply With Quote
Old
  (#115)
PhazeDelta1
Moderator
 
PhazeDelta1's Avatar
 
Videocard: EVGA 1080 FTW
Processor: Intel i7 6700k
Mainboard: Asus Sabertooth Z170
Memory: 32GB Corsair 2666MHz
Soundcard: Magni 2 Uber/Modi 2 Uber
PSU: EVGA SuperNOVA 1000 G3
Default 03-30-2014, 05:15 | posts: 15,617 | Location: USA

   
Reply With Quote
Old
  (#116)
Nafu
Newbie
 
Videocard: Sapphire HD7850/2GB
Processor: Intel Core i3 2100
Mainboard:
Memory:
Soundcard:
PSU: Corsair VX550W
Default 04-01-2014, 18:08 | posts: 1

nice bench, i will post soon
   
Reply With Quote
Old
  (#117)
PhazeDelta1
Moderator
 
PhazeDelta1's Avatar
 
Videocard: EVGA 1080 FTW
Processor: Intel i7 6700k
Mainboard: Asus Sabertooth Z170
Memory: 32GB Corsair 2666MHz
Soundcard: Magni 2 Uber/Modi 2 Uber
PSU: EVGA SuperNOVA 1000 G3
Default 04-20-2014, 01:10 | posts: 15,617 | Location: USA

   
Reply With Quote
Old
  (#118)
-Tj-
Ancient Guru
 
-Tj-'s Avatar
 
Videocard: ZOTAC GTX980Ti Amp!Omega
Processor: Intel i7 4770K OC 4.7GHz
Mainboard: ASUS Z87 Deluxe 2103
Memory: DDR3 G.skill 16GB 2400MHz
Soundcard: X-Fi Titanium HD @Bose A5
PSU: Nitro88+ 650W 52A
Default 04-20-2014, 22:45 | posts: 13,543 | Location: Proxima \/82

^
Is that 4.5ghz by both, including cache multi?

This is what I get atm at 4.5ghz, cache 4.2ghz, ram 2400mhz; gpu stock freq.



edit: managed to squeeze extra 4 points by multi and 1 point by single


This did the trick
vccsa (for ram oc 2133>2400) from 0.025 to 0.030v+ offset

Last edited by -Tj-; 04-26-2014 at 14:18.
   
Reply With Quote
My New Build
Old
  (#119)
Stealth83
Member Guru
 
Stealth83's Avatar
 
Videocard: EVGA GTX 980ti @ 1430
Processor: Intel I7 6700K 4.0/4.2
Mainboard: MSI Z170A Gaming M7
Memory: 16GB Cosair LPX @ 3000mhz
Soundcard: Sound Blaster Z
PSU: EVGA SuperNova 850G2
Default My New Build - 04-21-2014, 23:18 | posts: 73 | Location: USA--Berkshires


Last edited by Stealth83; 04-21-2014 at 23:24. Reason: wrong image link
   
Reply With Quote
Old
  (#120)
-Tj-
Ancient Guru
 
-Tj-'s Avatar
 
Videocard: ZOTAC GTX980Ti Amp!Omega
Processor: Intel i7 4770K OC 4.7GHz
Mainboard: ASUS Z87 Deluxe 2103
Memory: DDR3 G.skill 16GB 2400MHz
Soundcard: X-Fi Titanium HD @Bose A5
PSU: Nitro88+ 650W 52A
Default 05-06-2014, 20:44 | posts: 13,543 | Location: Proxima \/82

cpu only bench @ 4.6ghz, cache 4.2ghz & ram 2400mhz

   
Reply With Quote
Old
  (#121)
-Tj-
Ancient Guru
 
-Tj-'s Avatar
 
Videocard: ZOTAC GTX980Ti Amp!Omega
Processor: Intel i7 4770K OC 4.7GHz
Mainboard: ASUS Z87 Deluxe 2103
Memory: DDR3 G.skill 16GB 2400MHz
Soundcard: X-Fi Titanium HD @Bose A5
PSU: Nitro88+ 650W 52A
Default 05-29-2014, 22:26 | posts: 13,543 | Location: Proxima \/82

ok its still pure cpu limit even on 1x faster gpu (stock)

gained only extra 4-5fps
   
Reply With Quote
Old
  (#122)
Extraordinary
Ancient Guru
 
Extraordinary's Avatar
 
Videocard: EVGA GTX980 SC ACX2.0 4GB
Processor: FX-8350 @ 4.8GHz / H100i
Mainboard: ASUS Crosshair V Formula
Memory: 12GB 2133 G.Skill
Soundcard: Creative SB1040 7.1
PSU: Corsair RM1000
Default 05-30-2014, 14:44 | posts: 17,039 | Location: 127.0.0.1

5GHz

R15 - 768 points
11.5 - 8.36 points (best from a few runs)

   
Reply With Quote
Old
  (#123)
dsbig
Ancient Guru
 
dsbig's Avatar
 
Videocard: SAPPHIRE NITRO 390x
Processor: 3770k @ 4.3ghz
Mainboard: GA-Z77X-UD3H
Memory: 32gb 1866mhz
Soundcard: Soundblaster ZxR
PSU: Kingwin 850 watts
Default 06-01-2014, 13:01 | posts: 3,798 | Location: florida

my first time overlocking intel cpu

4.3ghz




I have change voltages yet. I left everything on auto.

is it ok to leave the voltage settings on auto?

hwmonitor and cpuz both show cpu voltage hitting 1.241 when running prime.

and temp stay below 70c
   
Reply With Quote
Old
  (#124)
-Tj-
Ancient Guru
 
-Tj-'s Avatar
 
Videocard: ZOTAC GTX980Ti Amp!Omega
Processor: Intel i7 4770K OC 4.7GHz
Mainboard: ASUS Z87 Deluxe 2103
Memory: DDR3 G.skill 16GB 2400MHz
Soundcard: X-Fi Titanium HD @Bose A5
PSU: Nitro88+ 650W 52A
Default 06-01-2014, 13:21 | posts: 13,543 | Location: Proxima \/82

I would use fixed voltage when testing such brute force tests, it will overvolt 0.07 - 0.09v more then it needs (prime94, IBT, Linx).

I think you're ok @ ~1.152v
   
Reply With Quote
Old
  (#125)
Extraordinary
Ancient Guru
 
Extraordinary's Avatar
 
Videocard: EVGA GTX980 SC ACX2.0 4GB
Processor: FX-8350 @ 4.8GHz / H100i
Mainboard: ASUS Crosshair V Formula
Memory: 12GB 2133 G.Skill
Soundcard: Creative SB1040 7.1
PSU: Corsair RM1000
Default 06-02-2014, 15:34 | posts: 17,039 | Location: 127.0.0.1

New high score for me
--------
   
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump



Powered by vBulletin®
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
vBulletin Skin developed by: vBStyles.com
Copyright (c) 1995-2014, All Rights Reserved. The Guru of 3D, the Hardware Guru, and 3D Guru are trademarks owned by Hilbert Hagedoorn.