Can I set Fan Speed to 0%?

Discussion in 'Rivatuner Statistics Server (RTSS) Forum' started by Tonk2644, Feb 4, 2010.

  1. Tonk2644

    Tonk2644 New Member

    Messages:
    5
    Likes Received:
    0
    GPU:
    Sapphire HD 3850
    I have an AGP HD3850 and its very noisy, while working it drives me crazy.

    The minimum setting I can put it on is 25%, is there anyway to lower it even more?

    Cheers

    Robbo
     
  2. alma

    alma Guest

    Messages:
    515
    Likes Received:
    0
    GPU:
    POV8800GT512MB/Dell U2410
    speedfan, if it detects the gpu chip properly
     
  3. Chouji

    Chouji Guest

    Messages:
    5,602
    Likes Received:
    2
    GPU:
    19 inch flat screen

    You'll burn out your video card very quickly.
    Video card fans rarely run at 100%.
    25% is usually plenty for idle and what not.
    But you still need moving air, else the warm air will collect inside the video cards cooling system, faster than it can passively dissipate.

    Long story short, if you turn off your fan, you'll fry your card. And AGP cards are becoming rare and expensive, so if you fry your card, you wont be able to get a new one cheap.

    In other words, just leave it alone, and set the fan speed to auto. Else buy a high quality passive cooler for it. Or one of the many active low-noise coolers.

    Edit:
    Passive cooler, perfectly silent, no fan at all. But wont be the coolest running.
    http://www.newegg.com/Product/Product.aspx?Item=N82E16835186016
    Just because this one doesn't have a fan, doesn't mean you can't add one. Possibly even 2 ultra-low noise fans.


    An active cooler, still very quiet compared to stock coolers. High quality, good cooling, great reviews.
    http://www.newegg.com/Product/Product.aspx?Item=N82E16835118117
     
    Last edited: Feb 4, 2010

Share This Page